Yes, this is the purpose of ifHighSpeed, to get around the 32-bit limitation.
Normally when ifSpeed overruns it's set to the maximum value, and we switch to ifHighSpeed. In this case the vendor has very helpfully decided to return a non-maximum value for ifSpeed, complicating the method needed to decide wether we should use ifSpeed or ifHighSpeed.
adam.
Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 06/10/2015 23:15:35, Roman Doerr roman.doerr@c3group.com.au wrote: Hi, Sounds like ifSpeed is a 32bit value. 10Gbps written in bps is larger than the maximum value supported by 32bit. If that’s the case I would guess that there is no vendor out there that can put the correct value for a 10Gbps interface in here. Cheers, Roman From: observium [mailto:observium-bounces@observium.org] On Behalf Of Bruce Winters Sent: Wednesday, 7 October 2015 12:38 AM To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps I have a simular issue with a cisco switch. If you look at the real time graph of the port is the scale correct? On Mon, Oct 5, 2015 at 6:19 PM Cameron Murray <cameron@techpath.com.au [mailto:cameron@techpath.com.au]> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps. ALERT Modify [http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=58...] Alert Utilization has exceeded 80% Entity tengigabitethernet1/0/1 [http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/] Conditions ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740) Metrics ifInOctets_perc = 623770 ifOutOctets_perc = 631740 Duration 3 days, 1h 13m 43s (2015-09-28 13:43:41) Device Device bne-be-l2r16-sw10g [http://cacti.bettacomputers.com.au/device/device=99/] Hardware Operating System Generic Device Location Uptime 3 days, 3h 46m 24s The ports that are trained up as 1gbps show correctly however higher do not. Port Data: port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 ) Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click here [http://www.techpath.com.au/contact-us/feedback/] to rate my work. [image001.png]
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au [mailto:cameron@techpath.com.au]
www.techpath.com.au [http://www.techpath.com.au]
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [image002.png] [image003.png] [image004.png] Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. _______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
ExchangeDefender Message Security: Check Authenticity [https://admin.exchangedefender.com/verify.php?id=t96LF7oK011253&from=rom...]