You need to remove the MIB lines from /etc/snmp/snmp.conf XD

(or not use debian).

Odd. It seems your device is responding to the first query used to find J circuits.

./discovery.php -h <hostname> -m pseudowires -d

adam.

On 2018-02-15 09:38:26, Peter Derissen <peter.derissen@eurofiber.com> wrote:

Ok got something.

 

MIB search path: mibs/rfc:mibs/juniper

Cannot find module (UCD-DISKIO-MIB): At line 10 in (none)

Cannot find module (UCD-DLMOD-MIB): At line 10 in (none)

Cannot find module (LM-SENSORS-MIB): At line 10 in (none)

Cannot find module (UCD-SNMP-MIB): At line 10 in (none)

Cannot find module (UCD-DEMO-MIB): At line 10 in (none)

Cannot find module (NET-SNMP-AGENT-MIB): At line 10 in (none)

Cannot find module (NET-SNMP-PASS-MIB): At line 10 in (none)

Cannot find module (NET-SNMP-EXTEND-MIB): At line 10 in (none)

Cannot find module (NET-SNMP-VACM-MIB): At line 10 in (none)

JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."ge-4/2/2.0".116368 = INTEGER: active(1)

JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-2/1/1.0".116265 = INTEGER: active(1)

JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-5/0/6.0".7437 = INTEGER: active(1)

JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-5/0/7.0".7438 = INTEGER: active(1)

root@Observium:/opt/observium#

 

Result only shows the l2circuits but not the routing-instances.

 

Met vriendelijke groet,

 

Peter Derissen                         Eurofiber Nederland

Network Engineer                    Safariweg 25-31

+31 (0)6 11587110                  3605 MA Maarssen

 

EF-logo_rood_RGB -handtekening

 

Volg ons op Twitter | Linkedin | Youtube

 

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong
Sent: donderdag 15 februari 2018 10:35
To: observium@observium.org
Subject: Re: [Observium] Pseudowires

 

That second : should be a / :D

 

adam.

On 2018-02-15 09:32:00, Peter Derissen <peter.derissen@eurofiber.com> wrote:

Im not changing a thing above the opt/Observium/config.php 😊

 

Result:

 

root@Observium:/opt/observium# snmpbulkwalk -v2c -c vel0cirapt0r -M mibs/rfc:mibs:juniper pe3.asd0033 JUNIPER-VPN-MIB::jnxVpnPwRowStatus       

MIB search path: mibs/rfc:mibs:juniper

Cannot find module (LM-SENSORS-MIB): At line 4 in (none)

Cannot find module (JUNIPER-VPN-MIB): At line 4 in (none)

JUNIPER-VPN-MIB::jnxVpnPwRowStatus: Unknown Object Identifier

 

Met vriendelijke groet,

 

Peter Derissen                         Eurofiber Nederland

Network Engineer                    Safariweg 25-31

+31 (0)6 11587110                  3605 MA Maarssen

 

EF-logo_rood_RGB -handtekening

 

Volg ons op Twitter | Linkedin | Youtube

 

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong
Sent: donderdag 15 februari 2018 10:30
To: observium@observium.org
Subject: Re: [Observium] Pseudowires

 

Yup.

 

BTW, there's no need to go into the mibs directory, don't change anything in there. Just because something exists in there doesn't mean it's used. "updating" things in there will either do nothing, or break things.

 

adam.

On 2018-02-15 09:29:07, Peter Derissen <peter.derissen@eurofiber.com> wrote:

Sorry was just in that directory. Want me to do it from /opt/Observium?

 

Met vriendelijke groet,

 

Peter Derissen                         Eurofiber Nederland

Network Engineer                    Safariweg 25-31

+31 (0)6 11587110                  3605 MA Maarssen

 

EF-logo_rood_RGB -handtekening

 

Volg ons op Twitter | Linkedin | Youtube

 

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong
Sent: donderdag 15 februari 2018 10:26
To: observium@observium.org
Subject: Re: [Observium] Pseudowires

 

Why would you do that from inside the mibs directory? oO

 

adam.

On 2018-02-15 09:23:27, Peter Derissen <peter.derissen@eurofiber.com> wrote:

root@Observium:/opt/observium/mibs# snmpbulkwalk -v2c -c <remove> -M mibs/rfc:mibs:juniper pe3.asd0033 JUNIPER-VPN-MIB::jnxVpnPwRowStatus

MIB search path: mibs/rfc:mibs:juniper

Cannot find module (SNMPv2-MIB): At line 10 in (none)

Cannot find module (IF-MIB): At line 10 in (none)

Cannot find module (IP-MIB): At line 10 in (none)

Cannot find module (TCP-MIB): At line 10 in (none)

Cannot find module (UDP-MIB): At line 10 in (none)

Cannot find module (HOST-RESOURCES-MIB): At line 10 in (none)

Cannot find module (NOTIFICATION-LOG-MIB): At line 10 in (none)

Cannot find module (DISMAN-EVENT-MIB): At line 10 in (none)

Cannot find module (DISMAN-SCHEDULE-MIB): At line 10 in (none)

Cannot find module (HOST-RESOURCES-TYPES): At line 10 in (none)

Cannot find module (MTA-MIB): At line 10 in (none)

Cannot find module (NETWORK-SERVICES-MIB): At line 10 in (none)

Cannot find module (UCD-DISKIO-MIB): At line 10 in (none)

Cannot find module (UCD-DLMOD-MIB): At line 10 in (none)

Cannot find module (LM-SENSORS-MIB): At line 10 in (none)

Cannot find module (UCD-SNMP-MIB): At line 10 in (none)

Cannot find module (UCD-DEMO-MIB): At line 10 in (none)

Cannot find module (SNMP-TARGET-MIB): At line 10 in (none)

Cannot find module (NET-SNMP-AGENT-MIB): At line 10 in (none)

Cannot find module (SNMP-MPD-MIB): At line 10 in (none)

Cannot find module (SNMP-USER-BASED-SM-MIB): At line 10 in (none)

Cannot find module (SNMP-FRAMEWORK-MIB): At line 10 in (none)

Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 10 in (none)

Cannot find module (SNMP-COMMUNITY-MIB): At line 10 in (none)

Cannot find module (IPV6-ICMP-MIB): At line 10 in (none)

Cannot find module (IPV6-MIB): At line 10 in (none)

Cannot find module (IPV6-TCP-MIB): At line 10 in (none)

Cannot find module (IPV6-UDP-MIB): At line 10 in (none)

Cannot find module (IP-FORWARD-MIB): At line 10 in (none)

Cannot find module (NET-SNMP-PASS-MIB): At line 10 in (none)

Cannot find module (NET-SNMP-EXTEND-MIB): At line 10 in (none)

Cannot find module (SNMP-NOTIFICATION-MIB): At line 10 in (none)

Cannot find module (SNMPv2-TM): At line 10 in (none)

Cannot find module (NET-SNMP-VACM-MIB): At line 10 in (none)

Cannot find module (INET-ADDRESS-MIB): At line 13 in juniper/JUNIPER-VPN-MIB

Cannot find module (IF-MIB): At line 15 in juniper/JUNIPER-VPN-MIB

Cannot find module (SNMPv2-TC): At line 17 in juniper/JUNIPER-VPN-MIB

Cannot find module (SNMP-FRAMEWORK-MIB): At line 19 in juniper/JUNIPER-VPN-MIB

Cannot find module (SNMPv2-SMI): At line 15 in juniper/JUNIPER-SMI

Did not find 'enterprises' in module #-1 (juniper/JUNIPER-SMI)

Unlinked OID in JUNIPER-SMI: juniperMIB ::= { enterprises 2636 }

Undefined identifier: enterprises near line 17 of juniper/JUNIPER-SMI

Did not find 'InetAddress' in module #-1 (juniper/JUNIPER-VPN-MIB)

Did not find 'InetAddressType' in module #-1 (juniper/JUNIPER-VPN-MIB)

Did not find 'InterfaceIndexOrZero' in module #-1 (juniper/JUNIPER-VPN-MIB)

Did not find 'RowStatus' in module #-1 (juniper/JUNIPER-VPN-MIB)

Did not find 'StorageType' in module #-1 (juniper/JUNIPER-VPN-MIB)

Did not find 'SnmpAdminString' in module #-1 (juniper/JUNIPER-VPN-MIB)

Did not find 'jnxMibs' in module JUNIPER-SMI (juniper/JUNIPER-VPN-MIB)

Unlinked OID in JUNIPER-VPN-MIB: jnxVpnMIB ::= { jnxMibs 26 }

Undefined identifier: jnxMibs near line 23 of juniper/JUNIPER-VPN-MIB

JUNIPER-VPN-MIB::jnxVpnPwRowStatus: Unknown Object Identifier

 

Met vriendelijke groet,

 

Peter Derissen                         Eurofiber Nederland

Network Engineer                    Safariweg 25-31

+31 (0)6 11587110                  3605 MA Maarssen

 

EF-logo_rood_RGB -handtekening

 

Volg ons op Twitter | Linkedin | Youtube

 

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong
Sent: donderdag 15 februari 2018 10:19
To: observium@observium.org
Subject: Re: [Observium] Pseudowires

 

is jnxVpnPwRowStatus populated on those devices?

 

snmpbulkwalk -v2c -c <community> -M mibs/rfc:mibs:juniper <hostname> JUNIPER-VPN-MIB::jnxVpnPwRowStatus

 

adam.

On 2018-02-15 08:25:01, Peter Derissen <peter.derissen@eurofiber.com> wrote:

Hello,

 

In the menu Ports -> Pseudowires -> All types i can only find the pseudowires that start on a cisco machine.

Nu juniper are in that list (there are a few as destination node).

Do I have to configure something to show the Juniper routing instances?

 

Regards,

 

Met vriendelijke groet,

 

Peter Derissen                         Eurofiber Nederland

Network Engineer                    Safariweg 25-31

+31 (0)6 11587110                  3605 MA Maarssen

 

EF-logo_rood_RGB -handtekening

 

Volg ons op Twitter | Linkedin | Youtube

 



******** IMPORTANT NOTICE ********
This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system.

Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof.
Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01.