Jajaja You can bet that i kinda new in all of this.
I look at the /pollerlog/ page and there is a lot of device (almost the 50% of my devices are almost at 100%) what do you suggest in cases like this?
This overlapping may cause the alerts duplicate?
My Observium Server have 6GB RAM and 6CPU's
Hermes J. Martinez
Asistente De Sistemas
hermes.martinez@pueblobonito.
com.mx
(669) 989-8900 | EXT 8656
www.pueblobonito.com.mx
Connect with us
De: observium [mailto:observium-bounces@
observium.org ] En nombre de Adam Armstrong
Enviado el: sábado, 27 de enero de 2018 01:57 p. m.
Para: observium@observium.org
Asunto: Re: [Observium] Graph
Nono, you need to go to /pollerlog/ on your install. Don't send me the code for the page that I wrote! :D
That log seems to suggest you have some devices that take a long time to complete. You seem to be overlapping poller wrapper processes 5 times, which suggests your poller wrapper is taking >25 minutes to complete!
Either your system is not fast enough, you're not running enough poller threads, or you have some very slow devices. You can work out which is which by looking at the server load and at the poller-wrapper graph on /pollerlog/
adam.
On 2018-01-26 16:55:03, Hermes J. Martinez <hermes.martinez@pueblobonito.
com.mx > wrote:Hi..
The log just show me some errors like those:
And here is the pollerlog page.
Hermes J. Martinez
Asistente De Sistemas
hermes.martinez@pueblobonito.
com.mx
(669) 989-8900 | EXT 8656
www.pueblobonito.com.mx
Connect with us
De: observium [mailto:observium-bounces@
observium.org ] En nombre de Adam Armstrong
Enviado el: jueves, 25 de enero de 2018 05:42 p. m.
Para: observium@observium.org
Asunto: Re: [Observium] Graph
Hi,
Ok, there doesn't seem to be anything bad here. The graph you show is kinda vaguely impossible, if the poller is successfully running.
What does your observium.log show? And what is the contents of the /pollerlog/ page on your observium install?
adam.
On 2018-01-26 00:17:18, Hermes J. Martinez <hermes.martinez@pueblobonito.
com.mx > wrote:Thank You for answer,
This is my cron setting:
# Run a complete discovery of all devices once every 6 hours
33 */6 * * * root /opt/observium/discovery.php -h all >> /dev/null 2>&1
# Run automated discovery of newly added devices every 5 minutes
*/5 * * * * root /opt/observium/discovery.php -h new >> /dev/null 2>&1
# Run multithreaded poller wrapper every 5 minutes
*/5 * * * * root /opt/observium/poller-wrapper.
py 8 >> /dev/null 2>&1
# Run housekeeping script daily for syslog, eventlog and alert log
13 5 * * * root /opt/observium/housekeeping.
php -ysel
# Run housekeeping script daily for rrds, ports, orphaned entries in the database and performance data
47 4 * * * root /opt/observium/housekeeping.
php -yrptb
# Traffic Accounting
*/5 * * * * root /opt/observium/poll-
billing.php >> /dev/null 2>&1 01 * * * * root /opt/observium/billing-
calculate.php >> /dev/null 2>&1
And this is my conf.php:
## It's recommended that settings are edited in the web interface at /settings/ on your observium installation.
## Authentication and Database settings must be hardcoded here because they need to work before you can reach the web-based configuration interface
// Database config --- This MUST be configured
$config['db_extension'] = 'mysqli';
$config['db_host'] = 'localhost';
$config['db_user'] = 'observium';
$config['db_pass'] = '';
$config['db_name'] = 'observium';
$config['fping'] = "/sbin/fping";
// Base directory
#$config['install_dir'] = "/opt/observium";
// Default community list to use when adding/discovering
$config['snmp']['community'] = array("");
// Authentication Model
$config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-auth, please see documentation for config help
// Enable alerter
$config['poller-wrapper']['
alerter'] = TRUE;
//$config['web_show_disabled'] = FALSE; // Show or not disabled devices on major pages.
// Set up a default alerter (email to a single address)
$config['email']['default']
= " hermes.martinez@pueblobonito.com.mx ";$config['alerts']['alerter']['
default']['type'] = "email"; $config['email']['from'] = "Observium <observium@pueblobonito.com.mx
>"; $config['email']['default_
only'] = TRUE;
// Auto Discovery Settings
$config['mydomain']
= "pueblobonito.com.mx"; $config['autodiscovery']['ip_
nets'] = array(" "); $config['autodiscovery']['xdp'
] = TRUE; // Autodiscover hosts via discovery protocols $config['autodiscovery']['
snmp_scan'] = TRUE; // autodiscover hosts via SNMP scanning
// Billing Traffic Accounting
$config['enable_billing']
= 1;
This is in the Web Interface:
The Modules are all activated
And this is de ports modules:
Hermes J. Martinez
Asistente De Sistemas
hermes.martinez@pueblobonito.
com.mx
(669) 989-8900 | EXT 8656
www.pueblobonito.com.mx
Connect with us
De: observium [mailto:observium-bounces@
observium.org ] En nombre de Adam Armstrong
Enviado el: jueves, 25 de enero de 2018 04:40 p. m.
Para: observium@observium.org
Asunto: Re: [Observium] Graph
You probably have incorrect number of threads, and/or incorrect poller interval.
What is your crontab file? And what poller settings have you added to the config.php and/or set in the web interface?
Thanks,
adam.
On 2018-01-25 23:28:26, Hermes J. Martinez <hermes.martinez@pueblobonito.
com.mx > wrote:Hi,
Does anyone know why my Observium stop generating graphics, what i think first was a trouble with the connection or the network, but them i add the Observium Server to the devices and it happens the same.
Here is a Screenshot
kind regards
Hermes J. Martinez
Asistente De Sistemas
hermes.martinez@pueblobonito.
com.mx
(669) 989-8900 | EXT 8656
www.pueblobonito.com.mx
Connect with us
Do you really need to print this e-mail?
En realidad necesita imprimir este correo?Aviso Legal / Legal Notice
http://img.pueblobonito.com.mx/legal
_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/ observium
