Hi Adam,
The reason why I increased it because I thought we were having too many devices thus the poller was not enough.
What would you recommend on the number of poller?
We have confirmed that there is no network issue on our end.
I have inserted $config['enable_ports_separate_walk'] = 1; into the config.php
Which poller screen are you referring to?
Thanks!
Regards, Edy
On 3/23/2016 9:53 AM, Adam Armstrong wrote:
Are you sure having 24 threads is a good idea?
Gaps like these are usually caused by network issues, or poller processes getting stacked up and interfering with one another.
You can try using the new 'experimental' ports poller mode :
$config['enable_ports_separate_walk'] = 1;
You'll be able to see on the poller information screen if it's had a positive/negative effect.
adam.
On 23/03/2016 01:50:43, Pui Edylie email@edylie.net wrote:
33 */6 * * * root /opt/observium/discovery.php -h all >> /dev/null 2>&1 */5 * * * * root /opt/observium/discovery.php -h new >> /dev/null 2>&1 */5 * * * * root /opt/observium/poller-wrapper.py 24 >> /dev/null 2>&1
On 3/23/2016 9:46 AM, Adam Armstrong wrote:
show me :
cat /etc/cron.d/observium
adam.
On 23/03/2016 01:37:31, Pui Edylie email@edylie.net wrote:
Dear Members,
We are running latest commercial version and currently we have about 260 devices with 24 probers.
We are getting graph that is breaking up but the link is ok.
Anyone has any idea?
Thanks!
Regards, Edy
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium