Hi Adam,

I found the following port logs, there where only 3 lines for 1/2/3:

2016-10-30 00:35:46     Interface changed (attrib): [type] -> cust; [descr] -> ommited; [circuit] -> CID2997; [speed] -> 500Mbit; [notes] -> Transporte 2
2016-10-30 00:35:46     Interface changed: [ifAlias] '' -> 'Cust: ommited [500Mbit] (Transporte 2) {CID2997}'
2016-03-01 11:50:24     Interface changed: [ifMtu] '' -> '1500'; [ifSpeed] '' -> '10000000000'; [ifPhysAddress] '' -> 'cc4e24e5f3e5'; [ifAdminStatus] '' -> 'up'; [ifOperStatus] '' -> 'up'; [ifHighSpeed] '' -> '10000'; [ifPromiscuousMode] '' -> 'true'; [ifConnectorPresent] '' -> 'true'; [ifDuplex] '' -> 'fullDuplex'; [ifTrunk] '' -> 'dot1Q'; [ifVlan] '' -> '1'; [port_label] '' -> '10GigabitEthernet1/2/3'; [port_label_short] '' -> '10Gi1/2/3'; [port_label_base] '' -> '10GigabitEthernet'; [port_label_num] '' -> '1/2/3'; [ifLastChange] '2016-03-01 11:45:44' -> '2016-02-27 02:05:01'

4 lines for 1/2/4;

2016-10-30 00:35:46     Interface changed (attrib): [type] -> cust; [descr] -> ommited; [circuit] -> CID2995); [speed] -> 500Mbit; [notes] -> Transporte 1) {CID2995
2016-10-30 00:35:46     Interface changed: [ifAlias] '' -> 'Cust: ommited [500Mbit] (Transporte 1) {CID2995)}'
2016-03-01 17:25:25     Interface changed: [ifAdminStatus] 'up' -> 'down'
2016-03-01 11:50:24     Interface changed: [ifMtu] '' -> '1500'; [ifSpeed] '' -> '0'; [ifPhysAddress] '' -> 'cc4e24e5f3e6'; [ifAdminStatus] '' -> 'up'; [ifOperStatus] '' -> 'down'; [ifHighSpeed] '' -> '0'; [ifPromiscuousMode] '' -> 'true'; [ifConnectorPresent] '' -> 'true'; [ifDuplex] '' -> 'fullDuplex'; [ifVlan] '' -> '1'; [port_label] '' -> '10GigabitEthernet1/2/4'; [port_label_short] '' -> '10Gi1/2/4'; [port_label_base] '' -> '10GigabitEthernet'; [port_label_num] '' -> '1/2/4'; [ifLastChange] '2016-03-01 11:45:44' -> '2016-02-27 02:02:36'

I also tried to disable and enable the port yesterday, but I don't see that in the logs.
I am now trying to get the ifalias info from SNMP to test.

With kind regards,
Sander Koorneef

---

From: observium <observium-bounces@observium.org> on behalf of Adam Armstrong <adama@memetic.org>
Sent: Monday, November 28, 2016 01:00
To: Observium Network Observation System
Subject: Re: [Observium] Question about port tags.

 

Is observium trying to clear tge port description for this port every 5 mins? (You can see in the event log for the port).

If so, its an observium bug. If not, it's a vendor bug reporting incorrect ifAlias.

Adam.

Sent from BlueMail

On 27 Nov 2016, at 23:41, Sander Koorneef <sander@unithost.nl> wrote:

Hi guys,

I have two ports in my environment with some tags on it. Observium recognizes it as a Customer and some other details.

But the thing is; one port is a stacking port without label (1/2/3, what you don't see), and the other one is disabled and also without a label.

Maybe I overlooked something. Never created the labels in the first place. The question: how can I clean this up?

I can remember that this popped up after a upgrade recently, but cannot remember the version of it :(

Running Observium 0.16.11.8262 (27th November 2016) Rolling.

With kind regards,
Sander Koorneef

observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium