<?php

/**
 * Observium
 *
 *   This file is part of Observium.
 *
 * @package    observium
 * @subpackage discovery
 * @copyright  (C) 2006-2014 Adam Armstrong
 *
 */

echo(" CPQPOWER-MIB ");

echo("Caching OIDs: ");
$hpups_array = array();
echo("upsInput ");
$hpups_array = snmpwalk_cache_multi_oid($device, "upsInput", $hpups_array, "CPQPOWER-MIB");
echo("upsOutput ");
$hpups_array = snmpwalk_cache_multi_oid($device, "upsOutput", $hpups_array, "CPQPOWER-MIB");
echo("upsBypass ");
$hpups_array = snmpwalk_cache_multi_oid($device, "upsBypass", $hpups_array, "CPQPOWER-MIB");

foreach (array_slice(array_keys($hpups_array),1) as $phase)
{
  # Skip garbage output:
  # upsOutput.6.0 = 0
  # upsOutput.7.0 = 0
  # upsOutput.8.0 = 0
  if (!isset($hpups_array[$phase]['upsInputPhase'])) { break; }

  # Input
  $index = $hpups_array[$phase]['upsInputPhase'];
  $descr = "Input"; if ($hpups_array[0]['upsInputNumPhases'] > 1) { $descr .= " Phase $index"; }

  ## Input voltage
  $oid   = "1.3.6.1.4.1.232.165.3.3.4.1.2.$index"; # CPQPOWER-MIB:upsInputVoltage.$index
  $value = $hpups_array[$phase]['upsInputVoltage'];

  discover_sensor($valid['sensor'], 'voltage', $device, $oid, "upsInputEntry.".$index, 'CPQPOWER-MIB', $descr, 1, $value);

  ## Input current
  $oid   = "1.3.6.1.4.1.232.165.3.3.4.1.3.$index"; # CPQPOWER-MIB:upsInputCurrent.$index
  $value = $hpups_array[$phase]['upsInputCurrent'];

  if ($value < 10000) # upsInputCurrent.1 = 136137420 ? really? You're nuts.
  {
    discover_sensor($valid['sensor'], 'current', $device, $oid, "upsInputEntry.".$index, 'CPQPOWER-MIB', $descr, 1, $value);
  }

  ## Input power
  $oid   = "1.3.6.1.4.1.232.165.3.3.4.1.4.$index"; # CPQPOWER-MIB:upsInputWatts.$index
  $value = $hpups_array[$phase]['upsInputWatts'];
  discover_sensor($valid['sensor'], 'power', $device, $oid, "upsInputEntry.".$index, 'CPQPOWER-MIB', $descr, 1, $value);

  # Output
  $index = $hpups_array[$phase]['upsOutputPhase'];
  $descr = "Output"; if ($hpups_array[0]['upsOutputNumPhases'] > 1) { $descr .= " Phase $index"; }

  ## Output voltage
  $oid   = "1.3.6.1.4.1.232.165.3.4.4.1.2.$index"; # CPQPOWER-MIB:upsOutputVoltage.$index
  $value = $hpups_array[$phase]['upsOutputVoltage'];
  discover_sensor($valid['sensor'], 'voltage', $device, $oid, "upsOutputEntry.".$index, 'CPQPOWER-MIB', $descr, 1, $value);

  ## Output current
  $oid   = "1.3.6.1.4.1.232.165.3.4.4.1.3.$index"; # CPQPOWER-MIB:upsOutputCurrent.$index
  $value = $hpups_array[$phase]['upsOutputCurrent'];
  discover_sensor($valid['sensor'], 'current', $device, $oid, "upsOutputEntry.".$index, 'CPQPOWER-MIB', $descr, 1, $value);

  ## Output power
  $oid   = "1.3.6.1.4.1.232.165.3.4.4.1.4.$index"; # CPQPOWER-MIB:upsOutputWatts.$index
  $value = $hpups_array[$phase]['upsOutputWatts'];
  discover_sensor($valid['sensor'], 'power', $device, $oid, "upsOutputEntry.".$index, 'CPQPOWER-MIB', $descr, 1, $value);

  ## Output Load
  $oid   = "1.3.6.1.4.1.232.165.3.4.1.0"; # CPQPOWER-MIB:upsOutputLoad.$index
  $descr = "Output Load";
  $value = $hpups_array[$phase]['upsOutputLoad'];
  discover_sensor($valid['sensor'], 'capacity', $device, $oid, "upsOutputLoad.0", 'CPQPOWER-MIB', $descr, 1, $value);

  # Bypass
  $index = $hpups_array[$phase]['upsBypassPhase'];
  $descr = "Bypass"; if ($hpups_array[0]['upsBypassNumPhases'] > 1) { $descr .= " Phase $index"; }

  ## Bypass voltage
  $oid   = "1.3.6.1.4.1.232.165.3.5.3.1.2.$index"; # CPQPOWER-MIB:upsBypassVoltage.$index
  $value = $hpups_array[$phase]['upsBypassVoltage'];
  discover_sensor($valid['sensor'], 'voltage', $device, $oid, "upsBypassEntry.".$index, 'CPQPOWER-MIB', $descr, 1, $value);
}

$scale = 0.1;

## Input frequency
$oid   = "1.3.6.1.4.1.232.165.3.3.1.0"; # CPQPOWER-MIB:upsInputFrequency.0
$value = $hpups_array[0]['upsInputFrequency'];
discover_sensor($valid['sensor'], 'frequency', $device, $oid, "upsInputFrequency.0", 'CPQPOWER-MIB', "Input", $scale, $value);

## Output Frequency
$oid   = "1.3.6.1.4.1.232.165.3.4.2.0"; # CPQPOWER-MIB:upsOutputFrequency.0
$value = $hpups_array[0]['upsOutputFrequency'];
discover_sensor($valid['sensor'], 'frequency', $device, $oid, "upsOutputFrequency.0", 'CPQPOWER-MIB', "Output", $scale, $value);

## Bypass Frequency
$oid   = "1.3.6.1.4.1.232.165.3.5.1.0"; # CPQPOWER-MIB:upsBypassFrequency.0
$value = $hpups_array[0]['upsBypassFrequency'];
discover_sensor($valid['sensor'], 'frequency', $device, $oid, "upsBypassFrequency.0", 'CPQPOWER-MIB', "Bypass", $scale, $value);

$hpups_array = array();
$hpups_array = snmpwalk_cache_multi_oid($device, "upsBattery", $hpups_array, "CPQPOWER-MIB");
$hpups_array = snmpwalk_cache_multi_oid($device, "upsEnvironment", $hpups_array, "CPQPOWER-MIB");

if (isset($hpups_array[0]['upsBatTimeRemaining']))
{
  $oid = "1.3.6.1.4.1.232.165.3.2.1.0"; # CPQPOWER-MIB:upsBatTimeRemaining.0
  $scale = 1/60;
  discover_sensor($valid['sensor'], 'runtime', $device, $oid, "upsBatTimeRemaining.0", 'CPQPOWER-MIB', "Battery Runtime Remaining", $scale, $hpups_array[0]['upsBatTimeRemaining']);
}

if (isset($hpups_array[0]['upsBatCapacity']))
{
  $oid = "1.3.6.1.4.1.232.165.3.2.4.0"; # CPQPOWER-MIB:upsBatCapacity.0
  discover_sensor($valid['sensor'], 'capacity', $device, $oid, "upsBatCapacity.0", 'CPQPOWER-MIB', "Battery Capacity", 1, $hpups_array[0]['upsBatCapacity']);
}

if (isset($hpups_array[0]['upsBatCurrent']))
{
  $oid = "1.3.6.1.4.1.232.165.3.2.3.0"; # CPQPOWER-MIB:upsBatCurrent.0

  discover_sensor($valid['sensor'], 'current', $device, $oid, "upsBatCurrent.0", 'CPQPOWER-MIB', "Battery", 1, $hpups_array[0]['upsBatCurrent']);
}

if (isset($hpups_array[0]['upsBatVoltage']))
{
  $oid = "1.3.6.1.4.1.232.165.3.2.2.0"; # CPQPOWER-MIB:upsBatVoltage.0

  discover_sensor($valid['sensor'], 'voltage', $device, $oid, "upsBatVoltage.0", 'CPQPOWER-MIB', "Battery", 1, $hpups_array[0]['upsBatVoltage']);
}

if (isset($hpups_array[0]['upsEnvAmbientTemp']))
{
  $oid  = ".1.3.6.1.4.1.232.165.3.6.1.0"; # CPQPOWER-MIB:upsEnvAmbientTemp.0

  $lowlimit = $hpups_array[0]['upsEnvAmbientLowerLimit'];
  $highlimit = $hpups_array[0]['upsEnvAmbientUpperLimit'];

  discover_sensor($valid['sensor'], 'temperature', $device, $oid, "upsEnvAmbientTemp.0", 'CPQPOWER-MIB', "Ambient", 1, $hpups_array[0]['upsEnvAmbientTemp']);
}

unset($hpups_array);

// EOF