They are part of the netstats module.
adam. On 17/11/2015 17:52:25, Gediminas Karčmarinas gediminas@kava.lt wrote: Thank, As I see 'Port' info take duration ~16 sec. Other question: It is possible to disable via config.php: ?
ipsystemstats_ipv4 IPv4 Packet Statistics Netstats enabled Disable ipsystemstats_ipv4_frag IPv4 Fragmentation Statistics Netstats enabled Disable ipsystemstats_ipv6 IPv6 Packet Statistics Netstats enabled Disable ipsystemstats_ipv6_frag IPv6 Fragmentation Statistics Netstats enabled Disable
On 2015.11.17 18:27, Moore, Cameron wrote:
Have you seen the overall Polling Information page? Go to the main menu > Polling Information. If you have a device that is particularly slow, go to the device page and then go to the settings menu and then Performance Data to see which poller module could be the cause of the slowdown. -- Cameron Moore From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Gediminas Karcmarinas Sent: Tuesday, November 17, 2015 8:33 AM To: Observium Network Observation System observium@observium.org [mailto:observium@observium.org] Subject: Re: [Observium] poller.php performance better ? I replace original file and put this in config.php. But still is any possibilities to get better performance with poller.php ? On 2015-11-17 16:24, Spencer Ryan wrote: You should never edit defaults.inc.php Put those changes into config.php
Spencer Ryan | Senior Systems Administrator | sryan@arbor.net [mailto:sryan@arbor.net] [mailto:sryan@arbor.net] Arbor Networks +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com [http://www.arbornetworks.com] [http://www.arbornetworks.com] On Tue, Nov 17, 2015 at 9:22 AM, Gediminas Karčmarinas <gediminas@kava.lt [mailto:gediminas@kava.lt]> wrote: Hello, Maybe is some way to get better performance with poller.php ? poller-wrapper.py(24406): /opt/observium/poller-wrapper.py: polled 1310 devices in 270 seconds with 40 workers
I already disable in what I don't need in '/opt/observium/includes/defaults.inc.php' $config['mibs']['SNMPv2-MIB'] = 1; $config['mibs']['IF-MIB'] = 1; $config['mibs']['OSPF-MIB'] = 0; $config['mibs']['EIGRP-MIB'] = 0; $config['mibs']['CISCO-MAC-ACCOUNTING-MIB'] = 0; $config['mibs']['JUNIPER-MAC-MIB'] = 0; $config['mibs']['IP-MIB'] = 1; $config['mibs']['IPV6-MIB'] = 0; $config['mibs']['CISCO-IETF-IP-MIB'] = 0; $config['mibs']['BGP4-V2-MIB-JUNIPER'] = 0; $config['mibs']['FORCE10-BGP4-V2-MIB'] = 0; $config['mibs']['BGP4-MIB'] = 0; $config['mibs']['CISCO-BGP4-MIB'] = 0; $config['mibs']['CISCO-CEF-MIB'] = 0; $config['mibs']['ENTITY-MIB'] = 0; $config['mibs']['CISCO-ENTITY-SENSOR-MIB'] = 0; $config['mibs']['ENTITY-SENSOR-MIB'] = 0; $config['mibs']['CISCO-IETF-PW-MPLS-MIB'] = 0; $config['mibs']['CISCO-RTTMON-MIB'] = 0; $config['mibs']['MPLS-L3VPN-STD-MIB'] = 0; $config['mibs']['MPLS-VPN-MIB'] = 0; $config['mibs']['FOUNDRY-SN-SWITCH-GROUP-MIB'] = 0; $config['mibs']['LLDP-MIB'] = 0; $config['mibs']['BRIDGE-MIB'] = 0; $config['mibs']['HOST-RESOURCES-MIB'] = 0; $config['mibs']['Juniper-UNI-ATM-MIB'] = 0; $config['mibs']['UCD-SNMP-MIB'] = 0; $config['mibs']['UCD-DISKIO-MIB'] = 0; $config['mibs']['Q-BRIDGE-MIB'] = 0; $config['mibs']['VMWARE-VMINFO-MIB'] = 0; $config['mibs']['EtherLike-MIB'] = 0;
$config['poller_modules']['unix-agent'] = 0; $config['poller_modules']['ipmi'] = 0; $config['poller_modules']['sensors'] = 1; $config['poller_modules']['status'] = 1; $config['poller_modules']['processors'] = 1; $config['poller_modules']['mempools'] = 1; $config['poller_modules']['storage'] = 1; $config['poller_modules']['netstats'] = 1; $config['poller_modules']['hr-mib'] = 0; $config['poller_modules']['ucd-mib'] = 0; $config['poller_modules']['ipSystemStats'] = 1; $config['poller_modules']['ports'] = 1; $config['poller_modules']['bgp-peers'] = 0; $config['poller_modules']['junose-atm-vp'] = 0; $config['poller_modules']['toner'] = 0; $config['poller_modules']['ucd-diskio'] = 0; $config['poller_modules']['wifi'] = 0; $config['poller_modules']['ospf'] = 0; $config['poller_modules']['cisco-ipsec-flow-monitor'] = 0; $config['poller_modules']['cisco-remote-access-monitor'] = 0; $config['poller_modules']['cisco-cef'] = 0; $config['poller_modules']['cisco-sla'] = 0; $config['poller_modules']['mac-accounting'] = 0; $config['poller_modules']['arista-software-ip-forwarding']= 0; $config['poller_modules']['cipsec-tunnels'] = 0; $config['poller_modules']['loadbalancer'] = 0; $config['poller_modules']['cisco-cbqos'] = 0; $config['poller_modules']['cisco-eigrp'] = 0; $config['poller_modules']['netscaler-vsvr'] = 0; $config['poller_modules']['aruba-controller'] = 0; $config['poller_modules']['entity-physical'] = 0; $config['poller_modules']['applications'] = 0; $config['poller_modules']['fdb-table'] = 1; $config['poller_modules']['graphs'] = 1; $config['poller_modules']['cisco-vpdn'] = 0; $config['poller_modules']['wmi'] = 0;
Hardware : SSD INTEL MEM : 14GB CPU : Intel(R) Xeon(R) CPU E3-1270 v3 @ 3.50GHz
_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]