Have you seen the overall Polling Information page? Go to the main menu > Polling Information.

If you have a device that is particularly slow, go to the device page and then go to the settings menu and then Performance Data to see which poller module could be the cause of the slowdown.

Cameron Moore

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Gediminas Karcmarinas
Sent: Tuesday, November 17, 2015 8:33 AM
To: Observium Network Observation System <observium@observium.org>
Subject: Re: [Observium] poller.php performance better ?

I replace original file and put this in config.php. But still is any possibilities to get better performance with poller.php ?

On 2015-11-17 16:24, Spencer Ryan wrote:

You should never edit defaults.inc.php

Put those changes into config.php

Spencer Ryan | Senior Systems Administrator | sryan@arbor.net

Arbor Networks

+1.734.794.5033 (d) | +1.734.846.2053 (m)

www.arbornetworks.com

On Tue, Nov 17, 2015 at 9:22 AM, Gediminas Karčmarinas <gediminas@kava.lt> wrote:

Hello,
Maybe is some way to get better performance with poller.php ?
poller-wrapper.py(24406): /opt/observium/poller-wrapper.py: polled 1310 devices in 270 seconds with 40 workers

I already disable in what I don't need in '/opt/observium/includes/defaults.inc.php'
$config['mibs']['SNMPv2-MIB'] = 1;
$config['mibs']['IF-MIB'] = 1;
$config['mibs']['OSPF-MIB'] = 0;
$config['mibs']['EIGRP-MIB'] = 0;
$config['mibs']['CISCO-MAC-ACCOUNTING-MIB'] = 0;
$config['mibs']['JUNIPER-MAC-MIB'] = 0;
$config['mibs']['IP-MIB'] = 1;
$config['mibs']['IPV6-MIB'] = 0;
$config['mibs']['CISCO-IETF-IP-MIB'] = 0;
$config['mibs']['BGP4-V2-MIB-JUNIPER'] = 0;
$config['mibs']['FORCE10-BGP4-V2-MIB'] = 0;
$config['mibs']['BGP4-MIB'] = 0;
$config['mibs']['CISCO-BGP4-MIB'] = 0;
$config['mibs']['CISCO-CEF-MIB'] = 0;
$config['mibs']['ENTITY-MIB'] = 0;
$config['mibs']['CISCO-ENTITY-SENSOR-MIB'] = 0;
$config['mibs']['ENTITY-SENSOR-MIB'] = 0;
$config['mibs']['CISCO-IETF-PW-MPLS-MIB'] = 0;
$config['mibs']['CISCO-RTTMON-MIB'] = 0;
$config['mibs']['MPLS-L3VPN-STD-MIB'] = 0;
$config['mibs']['MPLS-VPN-MIB'] = 0;
$config['mibs']['FOUNDRY-SN-SWITCH-GROUP-MIB'] = 0;
$config['mibs']['LLDP-MIB'] = 0;
$config['mibs']['BRIDGE-MIB'] = 0;
$config['mibs']['HOST-RESOURCES-MIB'] = 0;
$config['mibs']['Juniper-UNI-ATM-MIB'] = 0;
$config['mibs']['UCD-SNMP-MIB'] = 0;
$config['mibs']['UCD-DISKIO-MIB'] = 0;
$config['mibs']['Q-BRIDGE-MIB'] = 0;
$config['mibs']['VMWARE-VMINFO-MIB'] = 0;
$config['mibs']['EtherLike-MIB'] = 0;

$config['poller_modules']['unix-agent'] = 0;
$config['poller_modules']['ipmi'] = 0;
$config['poller_modules']['sensors'] = 1;
$config['poller_modules']['status'] = 1;
$config['poller_modules']['processors'] = 1;
$config['poller_modules']['mempools'] = 1;
$config['poller_modules']['storage'] = 1;
$config['poller_modules']['netstats'] = 1;
$config['poller_modules']['hr-mib'] = 0;
$config['poller_modules']['ucd-mib'] = 0;
$config['poller_modules']['ipSystemStats'] = 1;
$config['poller_modules']['ports'] = 1;
$config['poller_modules']['bgp-peers'] = 0;
$config['poller_modules']['junose-atm-vp'] = 0;
$config['poller_modules']['toner'] = 0;
$config['poller_modules']['ucd-diskio'] = 0;
$config['poller_modules']['wifi'] = 0;
$config['poller_modules']['ospf'] = 0;
$config['poller_modules']['cisco-ipsec-flow-monitor'] = 0;
$config['poller_modules']['cisco-remote-access-monitor'] = 0;
$config['poller_modules']['cisco-cef'] = 0;
$config['poller_modules']['cisco-sla'] = 0;
$config['poller_modules']['mac-accounting'] = 0;
$config['poller_modules']['arista-software-ip-forwarding']= 0;
$config['poller_modules']['cipsec-tunnels'] = 0;
$config['poller_modules']['loadbalancer'] = 0;
$config['poller_modules']['cisco-cbqos'] = 0;
$config['poller_modules']['cisco-eigrp'] = 0;
$config['poller_modules']['netscaler-vsvr'] = 0;
$config['poller_modules']['aruba-controller'] = 0;
$config['poller_modules']['entity-physical'] = 0;
$config['poller_modules']['applications'] = 0;
$config['poller_modules']['fdb-table'] = 1;
$config['poller_modules']['graphs'] = 1;
$config['poller_modules']['cisco-vpdn'] = 0;
$config['poller_modules']['wmi'] = 0;

Hardware : SSD INTEL
MEM : 14GB
CPU : Intel(R) Xeon(R) CPU E3-1270 v3 @ 3.50GHz

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

ipsystemstats_ipv4	IPv4 Packet Statistics	Netstats	enabled
ipsystemstats_ipv4_frag	IPv4 Fragmentation Statistics	Netstats	enabled
ipsystemstats_ipv6	IPv6 Packet Statistics	Netstats	enabled
ipsystemstats_ipv6_frag	IPv6 Fragmentation Statistics	Netstats	enabled