Hi,

On 21.02.16 17:54, chott@praha1.net wrote:
Hello Mike,

Cisco SB now works fine for SFPs DOM

but still have problem with Cisco IOS device 2960/3750

i have one LAB 3750G-12S-E, from CLI i have result for SFP but nothing in Observium

This is strange, because cisco DOM sensors fully supported.

Send me debug output:
./discovery.php -d -m os,sensors -h <cisco_device>


mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.
++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.
A2D readouts (if they differ), are reported in parentheses.
The threshold values are calibrated.

                              High Alarm  High Warn  Low Warn   Low Alarm
          Temperature         Threshold   Threshold  Threshold  Threshold
Port       (Celsius)          (Celsius)   (Celsius)  (Celsius)  (Celsius)
--------- ------------------  ----------  ---------  ---------  ---------
Gi1/0/12    56.8                90.0        85.0         0.0       -4.0

                              High Alarm  High Warn  Low Warn   Low Alarm
           Voltage            Threshold   Threshold  Threshold  Threshold
Port       (Volts)            (Volts)     (Volts)    (Volts)    (Volts)
---------  ---------------    ----------  ---------  ---------  ---------
Gi1/0/12   3.34                  3.60        3.50        3.10       3.00

           Optical            High Alarm  High Warn  Low Warn   Low Alarm
           Transmit Power     Threshold   Threshold  Threshold  Threshold
Port       (dBm)              (dBm)       (dBm)      (dBm)      (dBm)
---------  -----------------  ----------  ---------  ---------  ---------
Gi1/0/12     2.9                 8.1         5.0         0.0       -4.0

           Optical            High Alarm  High Warn  Low Warn   Low Alarm
           Receive Power      Threshold   Threshold  Threshold  Threshold
Port       (dBm)              (dBm)       (dBm)      (dBm)      (dBm)
-------    -----------------  ----------  ---------  ---------  ---------
Gi1/0/12    -4.7         +      -3.0        -7.0       -28.2      -33.0


email-header-praha1

Tomas Chott
technický ředitel

chott@praha1.net
Phone: +420 245 004 005
Mobile: +420 733 123 135

Metropolitní síť Praha 1 z.s.p.o.
Jindrisska 18
110 00 Praha 1
Czech Republic
www.praha1.net

Popis: Facebook

Od: observium [observium-bounces@observium.org] za uživatele Mike Stupalov [mike@observium.org]
Odesláno: 20. února 2016 10:39
Komu: Observium Network Observation System
Předmět: Re: [Observium] Cisco SB SFP DOM/DDM monitoring


Try with r7622.

On 19.02.16 17:38, chott@praha1.net wrote:
here we go

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableLength = INTEGER: 1
CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableChannel1 = INTEGER: 1
CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableChannel2 = INTEGER: 1
CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableChannel3 = INTEGER: 1
CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableChannel4 = INTEGER: 1
CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePolarity1 = INTEGER: 0
CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePolarity2 = INTEGER: 0
CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePolarity3 = INTEGER: 0
CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePolarity4 = INTEGER: 0
CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePairSkew1 = INTEGER: 8
CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePairSkew2 = INTEGER: 0
CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePairSkew3 = INTEGER: 8
CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePairSkew4 = INTEGER: 8
CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTransceiverTemp = INTEGER:                                                                                      46
CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTransceiverSupply = INTEGER                                                                                     : 3209300
CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTxBias = INTEGER: 6191
CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTxOutput = INTEGER: -6809
CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableRxOpticalPower = INTEGER: -                                                                                     9630
CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableDataReady = INTEGER: 0
CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableLOS = INTEGER: 0
CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTxFault = INTEGER: 0


email-header-praha1

Tomas Chott
technický ředitel

chott@praha1.net
Phone: +420 245 004 005
Mobile: +420 733 123 135

Metropolitní síť Praha 1 z.s.p.o.
Jindrisska 18
110 00 Praha 1
Czech Republic
www.praha1.net

Popis: Facebook

Od: observium [observium-bounces@observium.org] za uživatele Mike Stupalov [mike@observium.org]
Odesláno: 19. února 2016 15:02
Komu: Observium Network Observation System
Předmět: Re: [Observium] Cisco SB SFP DOM/DDM monitoring

Hi,

On 19.02.16 14:58, chott@praha1.net wrote:
Hello, team

any news? I can share switch 

Tom


email-header-praha1

Tomas Chott
technický ředitel

chott@praha1.net
Phone: +420 245 004 005
Mobile: +420 733 123 135

Metropolitní síť Praha 1 z.s.p.o.
Jindrisska 18
110 00 Praha 1
Czech Republic
www.praha1.net

Popis: Facebook

Od: chott@praha1.net
Odesláno: 18. února 2016 18:59
Komu: observium@observium.org
Předmět: Cisco SB SFP DOM/DDM monitoring

Hello team,

today i find OID for SFP monitoring in Cisco SB

in this case there is OID and CLI info from CISCO SG300-10 switch and SFP in slot GI9 with DOM support

can you add to Observium ? like Catalyst switches?

Only in CLI there is mW for Power in SNMPwalk there is dBm but same value dBm is right value for DOM monitoring

iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.5 = INTEGER: 47
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.6 = INTEGER: 3211700
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.7 = INTEGER: 6289
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.8 = INTEGER: -6809
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.9 = INTEGER: -9626
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.10 = INTEGER: 0
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.11 = INTEGER: 0
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.12 = INTEGER: 0
Hrm, show snmpwalk as:

snmpwalk -v2c -c <community> -m CISCOSB-PHY-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/ciscosb <your_device> rlPhyTestGetResult

   Port      Temp  Voltage Current Output  Input   LOS
             [C]   [Volt]  [mA]    Power   Power
                                   [mWatt] [mWatt]
----------- ------ ------- ------- ------- ------- ---
    gi1     Copper
    gi2     Copper
    gi3     Copper
    gi4     Copper
    gi5     Copper
    gi6     Copper
    gi7     Copper
    gi8     Copper
    gi9       47    3.20    6.28    0.20    0.10   No
   gi10      N/A     N/A     N/A     N/A     N/A   N/A

 Temp         - Internally measured transceiver temperature
 Voltage      - Internally measured supply voltage
 Current      - Measured TX bias current
 Output Power - Measured TX output power in milliWatts
 Input Power  - Measured RX received power in milliWatts
 LOS          - Loss of signal
 N/A - Not Available, N/S - Not Supported, W - Warning, E - Error


Tom


email-header-praha1

Tomas Chott
technický ředitel

chott@praha1.net
Phone: +420 245 004 005
Mobile: +420 733 123 135

Metropolitní síť Praha 1 z.s.p.o.
Jindrisska 18
110 00 Praha 1
Czech Republic
www.praha1.net

Popis: Facebook 



_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium



-- 
Mike Stupalov
http://observium.org


_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium



-- 
Mike Stupalov
http://observium.org


_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium



-- 
Mike Stupalov
http://observium.org