today i find OID for SFP monitoring in Cisco SB
in this case there is OID and CLI info from CISCO SG300-10 switch and SFP in slot GI9 with DOM support
can you add to Observium ? like Catalyst switches?
Only in CLI there is mW for Power in SNMPwalk there is dBm but same value dBm is right value for DOM monitoring
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.5 = INTEGER: 47
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.6 = INTEGER: 3211700
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.7 = INTEGER: 6289
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.8 = INTEGER: -6809
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.9 = INTEGER: -9626
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.10 = INTEGER: 0
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.11 = INTEGER: 0
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.12 = INTEGER: 0
Port Temp Voltage Current Output Input LOS
[C] [Volt] [mA] Power Power
[mWatt] [mWatt]
----------- ------ ------- ------- ------- ------- ---
gi1 Copper
gi2 Copper
gi3 Copper
gi4 Copper
gi5 Copper
gi6 Copper
gi7 Copper
gi8 Copper
gi9 47 3.20 6.28 0.20 0.10 No
gi10 N/A N/A N/A N/A N/A N/A
Temp - Internally measured transceiver temperature
Voltage - Internally measured supply voltage
Current - Measured TX bias current
Output Power - Measured TX output power in milliWatts
Input Power - Measured RX received power in milliWatts
LOS - Loss of signal
N/A - Not Available, N/S - Not Supported, W - Warning, E - Error
Tom
|
Tomas Chott chott@praha1.net |
Metropolitní sí» Praha 1 z.s.p.o. |
|