Dear Community,

After doing some digging with BTAC, it appears that we are hitting yet another issue where AG mode messes with SNMP.

When AG mode is disabled, we get the following log and SNMP responds fine to the requested OID :

2017/05/29-10:48:46, [SNMP-1005], 164074, SW/0 | Active, INFO, sw0, SNMP configuration attribute, snmp.64mibCap.SW-MIB, has changed from 0x0 to 0x57ff.

It’s very likely that this will be filed as a DEFECT as this part of code (SNMP with AG mode on) will be completely re-written for NOS720 due by mid-june. I’m pushing really hard to have it fixed by then.

I’ll update you accordingly.

Best regards.

Le 10/05/2017 18:59, « Youssef BENGELLOUN - ZAHR » <ybzahr@prodware.fr> a écrit :

    Dear Mike,

    Here is a feedback from Brocade support :

    “After testing and consulting, OID=.1.3.6.1.4.1.1588.3.3.1.164 and OID=1.3.6.1.4.1.1588.3.3.1.131  shown not being VDX NOS software supported.
    Nevertheless swFirmwareVersion    1.3.6.1.4.1.1588.2.1.1.1.1.6 is included in the MIB guide”

    So, which one is the correct / standard OID to use ?

    Best regards.

    Le 08/05/2017 21:57, « Youssef BENGELLOUN - ZAHR » <ybzahr@prodware.fr> a écrit :

        Dear Community,

        Here are initial feedbacks from BTAC :

        “Have gone through Brocade Network OS MIB Manual, found  swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6. Need to confirm and run some test son this OID.
        as this OID=.1.3.6.1.4.1.1588.3.3.1.164  and OID=1.3.6.1.4.1.1588.3.3.1.131  are not found in documentation.”

        They are still “labing” this. Will keep you updated.

        Best regards.

        Le 27/04/2017 12:03, « Youssef BENGELLOUN - ZAHR » <ybzahr@prodware.fr> a écrit :

            Dear Mike,

            Thank you for the workaround.

            I will still open a case with Brocade and ask them to correct this. They will probably end up ask me to open a new RFE, and we all know how this ends.

            Best regards.

            Le 27/04/2017 11:32, « Mike Stupalov » <mike@stupalov.ru au nom de mike@observium.org> a écrit :

                Yah,

                 this is again your "nice" vendor and it's snmp support :)

                6940:

                CMD[/usr/bin/snmpget -v2c -c *** -Pu -Oqv -m SW-MIB -M
                /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/brocade
                device swFirmwareVersion.0]

                STDOUT[
                v7.1.0a
                ]

                6740:

                CMD[/usr/bin/snmpget -v2c -c *** -Pu -Oqv -m SW-MIB -M
                /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/brocade
                device swFirmwareVersion.0]

                STDOUT[
                No Such Instance currently exists at this OID
                ]

                I added parse version from sysDescr, should work for your 6740 now.
                (But I see you use stable train, than wait when Adam sync stable with
                rolling train)

                Youssef BENGELLOUN - ZAHR wrote: