Hi - is there something I can collect to assist with it? I've confirmed it is present on all of our 65xx chassis, including the little 3-slot ones.
On them, it shows as a power supply like this:
Let me know if I can provide something to help identify it (or if it is just us who are seeing this and therefore an issue with our install maybe?)
Cheers!
Robert Williams
Custodian Data Centre
Email: Robert@CustodianDC.com
-----Original Message-----
From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong
Sent: 19 September 2014 22:29
To: Observium Network Observation System
Subject: Re: [Observium] 6800 weirdness
From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong
Sent: 19 September 2014 22:29
To: Observium Network Observation System
Subject: Re: [Observium] 6800 weirdness
Hmm. I don't see this messed up crossbar stats on my development 7600.
adam.
On 2014-09-19 09:21, Robert Williams wrote:
> Hi,
>
> We've taken our first batch of 6807-XL chassis and have a couple of
> minor issues with the component identification and detection in
> Observium (r5815). I'm not sure if it's best to add a bug report or
> raise it on here, so I'll start here and move to JIRA if requested.
>
> In summary the hardware is reported as: "Hardware: ciscoProducts.1765"
> - if the same standard as the other 6xxx series is to be followed,
> this should be translated to "cat6807" I believe?
>
> Slightly more importantly, there are permanent 'false' alarm states
> for the 3.3v outputs on the PSUs which are present:
>
> There are 4 bays, numbers 1 and 2 have PSUs, 3 and 4 are empty. It
> correctly shows the sensor only for objects for 1 and 2, but shows
> them as 'false' not 'true' for being happy. The graphed integer is 2
> (not 1).
>
> Console output say's it's OK, so probably (yet) another lying/inverse
> Cisco SNMP OID…
>
> power-converter 1:
> power-converter 1 : 3.3V Output: OK
> power-converter 2:
> power-converter 2 : 3.3V Output: OK
>
> Lastly, the Crossbars statistics are, well, a bit weird. Image below
> as it's easier to explain:
>
> I also have just noticed that all the other 6500 series chassis are
> showing a weird sensor (VTT this time) under the crossbar stats as
> well. So maybe this is a recent more general issue and is not directly
> related to the 6807 chassis?
>
> (This is a 6509 below)
>
> If this should all go to JIRA instead then can someone just let me
> know if I should split it into individual reports or not? Happy to do
> it, just want to follow the rules correctly :)
>
> Cheers as always!
>
> Robert Williams
> Custodian Data Centre
> Email: Robert@CustodianDC.com
>
>
>
> Links:
> ------
>
> _______________________________________________
> observium mailing list
_______________________________________________
observium mailing list