I've checked the queries, and I'm not sure how.
I've tested that these disappear when I set ports as ignored. It's very odd!
Adam.
Sent from BlueMail
On Apr 14, 2016, at 18:19, Robert Williams <Robert@CustodianDC.com> wrote:Hi – just to confirm/clarify - we see these on the “Device Status Notifications” section; and not in the menu Status Breakdown counter.
So, they DO show up here:
They do NOT show up here:
They do NOT show up on the menu itself:
BUT when you click that ‘Errored = 1’ item shown above, you get a page which DOES have them all on it:
Does that help or not?
If not so much, what can I provide additionally to assist?
Cheers!
Robert Williams
Custodian Data Centre
Email: Robert@CustodianDC.com
http://www.CustodianDC.comFrom: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong
Sent: 14 April 2016 13:35
To: observium@observium.org
Subject: Re: [Observium] (Not)Ignored Ports
I've just tested this, and it seems to be working fine for me. Ignoring ports removed them from the status notifications table.
adam.
On 14/04/2016 13:32:14, Adam Armstrong <adama@memetic.org> wrote:
This is affecting the alerting stuff, too?
adam.
On 14/04/2016 13:25:18, Bastiaan Topper <b.topper@korton.nl> wrote:
Hi,
We are experiencing the same issue. We have a lot of interfaces excluded from alerting. This stopped working about a week ago. We dont want to ignore the specific interface alerts for a specific time or until it recovers ( the features we currently have in the alerting system) but also want to be able to ignore interfaces complete from the interface based alerts. We use this quite a lot.
Would be great to have this feature back :)
Regards,
Bastiaan Topper
Op 14 apr. 2016 om 14:02 heeft Robert Williams <Robert@CustodianDC.com> het volgende geschreven:
Hehe, well, I’m confident they were being ignored up until last week because we suddenly have so many, that for them all to appear at once suggests a global change to me. The ignore port feature is pretty handy, there are a number of interface types which we ignore errors for, but still collect data from them. Anything half-duplex (Carel pCOs, modbus interfaces, generators, door controls, environmental stuff etc.) and a lot of windows servers (don’t choke, please) - particularly on customers boxes with MS Hyper-V and the 2 million made-up sub-interfaces it creates for fun.
So, please can it stay ‘appreciated’ - it’s very much liked here :)
Cheers!
Robert Williams
Custodian Data Centre
Email: Robert@CustodianDC.com
http://www.CustodianDC.comFrom: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong
Sent: 14 April 2016 12:35
To: observium@observium.org
Subject: Re: [Observium] (Not)Ignored Ports
Well, since the thing you're looking at is deprecated, there's no preferred method :P
But having those ports set as ignored should cause them not to appear there. I've no idea why they are. Are you sure they weren't always?
adam.
On 14/04/2016 10:37:35, Robert Williams <robert@custodiandc.com> wrote:
Ahhh, ok, no problem. If it’s being depreciated then what’s the preferred exclusion method for rubbish half-duplex ports that throw errors all day? Is there an alternative way of filtering their noise out?
Cheers!
Robert Williams
Custodian Data Centre
Email: Robert@CustodianDC.com
http://www.CustodianDC.comFrom: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong
Sent: 14 April 2016 10:25
To: observium@observium.org
Subject: Re: [Observium] (Not)Ignored Ports
This is probably related to some changes I made the other day to try to make some things more consistent when displaying status counts. This box is currently semi-deprecated, but I'll have a look later!
adam.
On 14/04/2016 09:53:57, Robert Williams <robert@custodiandc.com> wrote:
Hi All,
Is anyone else seeing this? Or any pointers towards a flag that needs to be set to stop them showing up? It makes reading the summary notifications quite difficult when it’s flooded with irrelevant errored ports :)
Cheers!
Robert Williams
Custodian Data Centre
Email: Robert@CustodianDC.com
http://www.CustodianDC.comFrom: observium [mailto:observium-bounces@observium.org] On Behalf Of Robert Williams
Sent: 10 April 2016 12:02
To: Observium Network Observation System (observium@observium.org) <observium@observium.org>
Subject: [Observium] (Not)Ignored Ports
Hi,
It looks like ignored ports are suddenly being included in the ‘Device Status Notifications’ for Errors.
We have quite a few devices which have ‘expected’ errors (half-duplex IP-PDUs etc.) so are now being spammed with error’ed ports:
They _do_ disappear if I select the device itself to be ignored, but they used to be silenced just by setting the ‘Alerts’ column to ‘No’.
Is this an error - or is there now an intentional new variable which I need to set in config.php to ignore them?
Cheers guys!
Robert Williams
Custodian Data Centre
Email: Robert@CustodianDC.com
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
