You should also check "ifXEntry" to get extended counters.
adam.
Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 09/07/2015 19:11:53, Johnston, Tom tom.johnston@edinaschools.org wrote: SNMPWALK Results
IF-MIB::ifIndex.10201 = INTEGER: 10201 IF-MIB::ifDescr.10201 = STRING: TenGigabitEthernet1/0/1 IF-MIB::ifType.10201 = INTEGER: ethernetCsmacd(6) IF-MIB::ifMtu.10201 = INTEGER: 1500 IF-MIB::ifSpeed.10201 = Gauge32: 4294967295 IF-MIB::ifPhysAddress.10201 = STRING: 6c:fa:89:be:6f:33 IF-MIB::ifAdminStatus.10201 = INTEGER: up(1) IF-MIB::ifOperStatus.10201 = INTEGER: up(1) IF-MIB::ifLastChange.10201 = Timeticks: (242331654) 28 days, 1:08:36.54 IF-MIB::ifInOctets.10201 = Counter32: 1241992353 IF-MIB::ifInUcastPkts.10201 = Counter32: 2194606 IF-MIB::ifInDiscards.10201 = Counter32: 0 IF-MIB::ifInErrors.10201 = Counter32: 9 IF-MIB::ifInUnknownProtos.10201 = Counter32: 0 IF-MIB::ifOutOctets.10201 = Counter32: 573439732 IF-MIB::ifOutUcastPkts.10201 = Counter32: 2121442 IF-MIB::ifOutDiscards.10201 = Counter32: 0 IF-MIB::ifOutErrors.10201 = Counter32: 0
On 7/9/15, 12:57 PM, "observium on behalf of observium-request@observium.org" wrote:
Send observium mailing list submissions to observium@observium.org
To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request@observium.org
You can reach the person managing the list at observium-owner@observium.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..."
Today's Topics:
- Re: Dual Purpose Interface (Adam Armstrong)
Message: 1 Date: Thu, 09 Jul 2015 18:57:51 +0100 From: "Adam Armstrong" To: "" Subject: Re: [Observium] Dual Purpose Interface Message-ID: Content-Type: text/plain; charset="utf-8"
It seems this device is /also/ not returning correct data for these ports. You won't get very far with 32bit counters on a TE port :)
Check what it's reporting via SNMP. It's likely not really anything to do with us.
adam.
Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 09/07/2015 14:21:04, Johnston, Tom wrote: 2960X switches and newer styles of switches have dual speed SFP slots. On my 2960X I have switched from 1GIG SFP to a 10GIG SFP.
This changes the ports from GigabitEthernet to TenGigabitEthernet.
In the switch config now the GigabitEthernet ports are gone (they get removed from running config) and now TenGigabit Ports are present and in use.
Observium still shows both types of interfaces present, and there is none to delete under ports. It also doesn?t show that the TenGig port is up even though it is up. Whats the best way to handle this? Delete/re-add switch?
Te1/0/1 ? ? ? ? ? ? ? ? ? ? ?connected ? ?trunk ? ? ? ?full ? ?10G SFP-10GBase-LRM (was the gigabit 1/0/49) Te1/0/2 ? ? ? ? ? ? ? ? ? ? ?notconnect ? 1 ? ? ? ? ? ?full ? ?10G Not Present (was the gigabit 1/0/50) Po2 ? ? ? VV-6504 ? ? ? ? ? ?notconnect ? 1 ? ? ? ? ? ?auto ? auto Fa0 ? ? ? ? ? ? ? ? ? ? ? ? ?disabled ? ? routed ? ? ? auto ? auto 10/100BaseTX VV-IDF3-2960X01#
10149 GigabitEthernet1/0/49 VV-6504 G4/8 Ethernet enabled?/?down No?Yes No?Yes 64bit 10150 GigabitEthernet1/0/50 VV-6504 G4/9 Ethernet enabled?/?down No?Yes No?Yes 64bit 10201 TenGigabitEthernet1/0/1 Ethernet enabled?/?down No?Yes No?Yes 32bit 10202 TenGigabitEthernet1/0/2 Ethernet enabled?/?down No?Yes No?Yes 32bit Thanks in advance
Thanks in advance