Hi,

I am monitoring an Arista 7508E with 4x7500E-36Q-LC line cards.
This are 40GB ports that can be subdivided into 10GB ports.
This represent a maximum of 576 10GB ports, each of them having several sensors (See below what the Observium inventory reports).

Right now, these sensors are graphed all together with the chassis sensors making graphs that are not really useful (See attached).

Is it/would it be possible, to display each sensors in the detailed view of the ports instead ?

 

•   1. Xcvr Slot 1
  Xcvr Slot 1
  •   1. QSFP-40G-SR4
    Xcvr for Ethernet4/1 [Serial: XMD13450006W]
    •   1. DOM Temperature Sensor for Ethernet4/1
      DOM Temperature Sensor for Ethernet4/1 (32.30000 temperature)
    •   2. DOM Voltage Sensor for Ethernet4/1
      DOM Voltage Sensor for Ethernet4/1 (3.27000 voltage)
    •   0. Lane 0 for Xcvr for Ethernet4/1
      Lane 0 for Xcvr for Ethernet4/1
      •   1. DOM TX Bias Sensor for Ethernet4/1/1
        DOM TX Bias Sensor for Ethernet4/1/1 (0.00815 current)
      •   3. DOM RX Power Sensor for Ethernet4/1/1
        DOM RX Power Sensor for Ethernet4/1/1 (0.00050 power)
    •   1. Lane 1 for Xcvr for Ethernet4/1
      Lane 1 for Xcvr for Ethernet4/1
      •   1. DOM TX Bias Sensor for Ethernet4/1/2
        DOM TX Bias Sensor for Ethernet4/1/2 (0.00778 current)
      •   3. DOM RX Power Sensor for Ethernet4/1/2
        DOM RX Power Sensor for Ethernet4/1/2 (0.00052 power)
    •   2. Lane 2 for Xcvr for Ethernet4/1
      Lane 2 for Xcvr for Ethernet4/1
      •   1. DOM TX Bias Sensor for Ethernet4/1/3
        DOM TX Bias Sensor for Ethernet4/1/3 (0.00742 current)
      •   3. DOM RX Power Sensor for Ethernet4/1/3
        DOM RX Power Sensor for Ethernet4/1/3 (0.00053 power)
    •   3. Lane 3 for Xcvr for Ethernet4/1
      Lane 3 for Xcvr for Ethernet4/1
      •   1. DOM TX Bias Sensor for Ethernet4/1/4
        DOM TX Bias Sensor for Ethernet4/1/4 (0.00737 current)
      •   3. DOM RX Power Sensor for Ethernet4/1/4