This is firmware/hardware issue, try to upgrade device firmware.

SNMPv2-MIB does not matter here, since in poller all oids requested by numeric oids.

When walked (snmpwalk) table - value returned,
when try to snmpget specific oid - return error.


Jacek.Dabrowski@selgros.pl wrote:

Done, I see all the time SNMPv2-MIB no PowerNet-MIB in poller.

SNMPv2-MIB its wrong mib for this device.

 

 

Pozdrawiam

Jacek Dąbrowski

 

From: Mike Stupalov <mike@stupalov.ru> On Behalf Of Mike Stupalov
Sent: Friday, August 31, 2018 1:36 PM
To: Observium <observium@observium.org>; Dąbrowski Jacek <Jacek.Dabrowski@selgros.pl>
Subject: Re: [Observium] APC ATS - continued

 

Hi,

 please attach output for poller debug:

./poller.php -d -m sensors -h <device>


31 August 2018 at 12:21

Hello Adam,

 

My Observium now:

Observium

18.8.9403 (27th August 2018)

 

But in GUI nothing has changed, new debug in the attachments.

 

 

Pozdrawiam

Jacek Dąbrowski


 

From: observium <observium-bounces@observium.org> On Behalf Of Adam Armstrong
Sent: Wednesday, August 29, 2018 8:16 PM
To: observium@observium.org
Subject: Re: [Observium] APC ATS - continued

 

I checked locally on an ATS system before I noticed the version was old, and those OIDs used in the poller are correct, so it is probably a bug that was fixed.

 

adam.



_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

29 August 2018 at 21:16

I checked locally on an ATS system before I noticed the version was old, and those OIDs used in the poller are correct, so it is probably a bug that was fixed.

 

adam.

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

29 August 2018 at 21:02

OK, I will check soon in the new version.

 

 

Pozdrawiam

Jacek Dąbrowski


From: observium <observium-bounces@observium.org> On Behalf Of Adam Armstrong
Sent: Wednesday, August 29, 2018 6:35 PM
To: observium@observium.org
Subject: Re: [Observium] APC ATS - continued

 

Last Changed Rev: 9073

Last Changed Date: 2018-03-02 23:37:46 +0100 (Fri, 02 Mar 2018)

 

Please don't report issues with ancient versions.

 

Thanks,

adam.



_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

29 August 2018 at 19:34

Last Changed Rev: 9073

Last Changed Date: 2018-03-02 23:37:46 +0100 (Fri, 02 Mar 2018)

 

Please don't report issues with ancient versions.

 

Thanks,

adam.

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

29 August 2018 at 19:03

Hello,

 

I am coming back with the topic of APC ATS, maybe someone will help.

The subject of the correct voltage after the discovery, the value is correct, when pooler finish working the value disappears.

As I noticed during the discovery, is viewed source in PowerNet-MIB in debug mode , the pooler process in debug is searched in SNMPv2-MIB !!!

Is it some bug ?

 

Details in the attachments.

 

 

Regards

Jacek Dąbrowski


 



_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

 

--
Mike Stupalov
Observium Limited, http://observium.org


--
Mike Stupalov
Observium Limited, http://observium.org