I get a ton of data respons when doing that.. so i assume SNMP is working completely on the server..

but i get nothing but ordinary stuff.. If i go to the inventory i don't see any HP disk controller there. Even the nics that has been identified as HP is showen as unknowen..

this is what i see in inventory and this is a ML350 gen 7 server i belive



Fra: "Michiel Klaver" <michiel@klaver.it>
Til: "Observium Network Observation System" <observium@observium.org>
Sendt: torsdag, 17. september 2015 13:59:36
Emne: Re: [Observium] added a HP server over snmp

if everything has been setup correctly, you should be able to check the result using an snmpwalk command via OID 1.3.6.1.4.1.232

For example:
observium-box# snmpwalk -v 2c -c public your.server.hostname 1.3.6.1.4.1.232


At 17 sep. 2015, 12:06 Casper Allerslev Jensen <casper@dingit.dk> wrote:
i take it from the silence that HP SNMP should be pulled automaticly by observium IF HP snmp is correctly setup - right?

cause im suspecting that maybe the insight manager and the others may have some issues... 

<email signatur.PNG>

Fra: "Casper Allerslev Jensen" <casper@dingit.dk>
Til: "Observium Network Observation System" <observium@observium.org>
Sendt: onsdag, 16. september 2015 14:12:37
Emne: Re: [Observium] added a HP server over snmp

and they seem to be installed aswell.. 

<email signatur.PNG>

Fra: "Michiel Klaver" <michiel@klaver.it>
Til: "Observium Network Observation System" <observium@observium.org>
Sendt: onsdag, 16. september 2015 13:52:47
Emne: Re: [Observium] added a HP server over snmp

Last time I checked, HP SNMP Agents support for Windows involved a combination of installing the Insight Manager agents and the WBEM providers:



Op 16 sep. 2015, om 11:38  Casper Allerslev Jensen <casper@dingit.dk> wrote:
Hi all,

I have just added a HP server. added SNMP and set it up. 

The server connected fine to observium.

Now i see Observium has support for HP but the data im getting is pretty mandatory server stuff so im wondering what the HP support is added? or did i do it wrong?

As an example i was hoping to get some RAID info on the RAID 1 running on the server with the controller that was shipped. But all i see is C:\ which won't alert me if a disk fail.



_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium


_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium