Hello

I have some APC PDU with two lines of plugs. The name of the first row of plugs are: "Bank 1" and the second row's name is Bank 2. The two banks have a summarized current value, this is the "Bank Total".

I would like to create an alert for the Bank 1 and Bank 2 (if the current ge 7 send an alert) but not for Bank Total. 

Device Entity Status Checked Changed Alerted

pdu05 Bank 2 OK 2m 40s 14m 34s Never  

pdu05 Bank 1 OK 2m 40s 14m 34s Never  

pdu05 Bank Total OK 2m 40s 14m 35s Never  

pdu06 Bank 2 OK 2m 52s 14m 26s Never  

pdu06 Bank 1 OK 2m 52s 14m 26s Never  

pdu06 Bank Total OK 2m 52s 14m 26s Never   

If I add an alert where “Check conditions” is "sensor_value ge 7” and Associations “Device Match” is “hostname match pdu0*” it will be true for the Bank Total Entity too. 

There is any solution for alerting only for the Bank 1 and Bank2?

Thanks

Laszlo

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium