Further up the debug output you can see the data returned from the switch. You're looking for ifHCInOctets && ifHCOutOctets.
If the SRX is fucking those up, which I can totally believe for a cluster, you need to talk to Pooniper about it.
adam.
On Fri, 01 Feb 2013 14:09:32 +1100, Jacob Gardiner jacob@jacobgardiner.com wrote:
Hi all,
Firstly - Cheers Adam et all for the development.
I'm looking to see if anybody has had any luck properly monitoring a Juniper SRX cluster. We've got a couple up and running at the moment, in
addition to some J-series units that we'll probably replace with another
pair of SRXs in the future but we've been running into some issues.
Basically when adding the host to observium, everything works a treat as
usual. Devices get detected properly, node0 & node1's routing engines get detected properly and we can see two different graphs for each in relation to processor, memory, temperature etc. However when polling the
interfaces, we get a zero response for bps.
This behavior happens on all interfaces except the lo0.X interfaces and fxpX interfaces. (They show graphs and results).
I've run a poll via cmdline with the -d flag and can see that the poller
is definitely seeing a 0 response from all of the other interfaces, output looks something like:
<paste> SQL[INSERT INTO `ports-state` (`port_id`) VALUES ('2151')] state
inserted
SQL[UPDATE `ports-state` set `poll_time` ='1359075465',`poll_period` ='153',`ifInOctets` ='',`ifInOctets_rate` ='0',`ifInOctets_delta` ='0',`ifOutOctets` ='',`ifOutOctets_rate` ='0',`ifOutOctets_delta` ='0',`ifInErrors` ='',`ifInErrors_rate` ='0',`ifInErrors_delta` ='0',`ifOutErrors` ='',`ifOutErrors_rate` ='0',`ifOutErrors_delta` ='0',`ifInUcastPkts` ='',`ifInUcastPkts_rate` ='0',`ifInUcastPkts_delta`
='0',`ifOutUcastPkts` ='',`ifOutUcastPkts_rate` ='0',`ifOutUcastPkts_delta` ='0',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='0',`ifUcastPkts_rate` ='0',`ifErrors_rate` ='0' WHERE `port_id` = '2151'] 1 updated Port reth0(568) VLAN == ifInOctets (0 B) 0 Bps 153 secs
ifOutOctets (0 B) 0 Bps 153 secs
ifInErrors (0 B) 0 Bps 153 secs
ifOutErrors (0 B) 0 Bps 153 secs
ifInUcastPkts (0 B) 0 Bps 153 secs
ifOutUcastPkts (0 B) 0 Bps 153 secs bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)OK u:0.00 s:0.03 r:50.09
</paste>
My first impression is that it's the MIB incorrectly polling the device,
Can anybody confirm?
Cheers,
JG
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium