Please be aware, that it's not recommended to edit this file as it will
be overwritten at next update.
These two lines changes made by me, to actually match some subinterfaces
of ADSL modules, previously it was matched using ifdescr text. Before
r2938 commit it matched using ifdescr.
$config['bad_if'][] = "-atm layer";
$config['bad_if'][] = "-atm subif";
$config['bad_if'][] = "-aal5";

Does it partially match your current ATM interface names?

On 04/04/12 18:05, Bruce Majola wrote:
> Hi Nikolay,
> 
> Thanks for your help. I did not bother with this previously because for
> some reason Observium was not picking up the ATM interfaces nor showing
> traffic on them. By chance I noticed that after upgrading to the latest
> version the traffic was being graphed for these interfaces but there was
> nothing shown under device overview. I corrected the issue by disabling
> these lines;
> 
> #$config['bad_iftype'][] = "atmSubInterface";
> #$config['bad_iftype'][] = "aal5";
> 
> Regards,
> Bruce Majola
> 
> -----Original Message-----
> From: Nikolay Shopik [mailto:shopik@inblock.ru] 
> Sent: 04 April 2012 03:42 PM
> To: Bruce Majola
> Cc: Observium Network Observation System
> Subject: Re: [Observium] ATM interfaces not showing on Device Overview
> 
> I never work with real ATM interfaces, so I don't know how they actually
> named. I do recommend run
> snmpwlk -Os -c community -v 2C host.example.com ifdescr, to find out
> that actually names of your ATM interfaces and see if they actually
> match this option.
> 
> And $config['bad_if'][] = "-atm"; option exist there for quite some
> time, how long ago you notice problem?
> 
> On 04/04/12 17:31, Bruce Majola wrote:
>> Hi Nikolay,
>>
>>
>> Would removing this line from the includes/defaults.inc.php file help?
>>
>> $config['bad_if'][] = "-atm";
>>
>> Regards,
>> Bruce Majola
>>
>> -----Original Message-----
>> From: Nikolay Shopik [mailto:shopik@inblock.ru] 
>> Sent: 04 April 2012 03:17 PM
>> To: Bruce Majola; Observium Network Observation System
>> Subject: Re: [Observium] ATM interfaces not showing on Device Overview
>>
>> Hi Bruce,
>>
>> That's probably because of recent changes done in
>> includes/defaults.inc.php, which I involved a bit. Some of interfaces
>> ignored by iftype now.
>>
>> On 04/04/12 15:08, Bruce-Young Majola wrote:
>>> Hi Adam,
>>>
>>> I am having a strange issues which I need your help in
>> troubleshooting.
>>> I have this 7606 which has ATM interfaces configured but the problem
>> is
>>> that when I discover this device, all the interfaces are discovered
>>> include ATM ones but as soon as the poller runs, they disappear
> again.
>> I
>>> am not sure how to fix this issues. I am running the latest version
> of
>>> Observium. Thanks for your help.
>>>
>>> After discovery
>>>
>>>
>>> After poller has run 
>>>
>>>
>>> Regards,
>>> Bruce Majola
>>>
>>>
>>
>>>
>>> DISCLAIMER: The information in this message is confidential and may
> be
>> legally privileged. It is intended solely for the addressee. Access to
>> this message by anyone else is unauthorized. If you are not the
> intended
>> recipient, any disclosure, copying, or distribution of the message, or
>> any action or omission taken by you in reliance on it, is prohibited
> and
>> may be unlawful. Please immediately contact the sender if you have
>> received this message in error. SWIFTNET and any of its subsidiaries
>> each reserve the right to monitor all e-mail communications through
> its
>> networks. Thank you.
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> observium mailing list
>>> observium@observium.org
>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
>>
> 
>>
>> DISCLAIMER: The information in this message is confidential and may be
> legally privileged. It is intended solely for the addressee. Access to
> this message by anyone else is unauthorized. If you are not the intended
> recipient, any disclosure, copying, or distribution of the message, or
> any action or omission taken by you in reliance on it, is prohibited and
> may be unlawful. Please immediately contact the sender if you have
> received this message in error. SWIFTNET and any of its subsidiaries
> each reserve the right to monitor all e-mail communications through its
> networks. Thank you.
>                                                                                                                                                                                                                                              
> 
> DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. SWIFTNET and any of its subsidiaries each reserve the right to monitor all e-mail communications through its networks. Thank you.