Seems as you changed default interface name, instead port comments.
Correctly way for set ifAlias in routeros (example):
/interface ethernet set [ find default-name=sfp3 ] comment=StarLink
Lyndon Labuschagne wrote on 31.01.19 13:27:
I assume that this would be the interface name on a Mikrotik and not a Label I didn’t see any specifics around this on the documentation
/interface ethernet> print Flags: X - disabled, R - running, S - slave # NAME MTU MAC-ADDRESS ARP SWITCH 0 RS Core: sfp-sfpplus1- Trunk to 6509 2000 4C:5E:0C:13:CB:B1 enabled 1 R Core: sfp-sfpplus2 - Link to DC9 2000 4C:5E:0C:13:CB:B2 enabled
vs the Cisco version which does work as expected
interface TenGigabitEthernet3/7 description TRUNK TO 7600 - TenG4/8 switchport switchport trunk encapsulation dot1q
On 31 Jan 2019, at 12:21, Mike Stupalov <mike@observium.org mailto:mike@observium.org> wrote:
Are you sure that correctly configured ports on device?
Show your config for an port for example..
Lyndon Labuschagne wrote on 31.01.19 11:42:
Ok,
So the info is now correct, Observium is now showing the port description as Core: not CoreCore:
But as yet I am not seeing the port listed under Core ports in Observium. or Transit or Peering etc.
On 30 Jan 2019, at 22:56, Mike Stupalov <mike@observium.org mailto:mike@observium.org> wrote:
Ok, should be fixed in r9696.
But this is veeeery strange port ifDescr.
Lyndon Labuschagne via observium wrote on 30/01/2019 14:29:
Great Thanks 👍
On 30 Jan 2019, at 13:28, Adam Armstrong via observiumobservium@observium.org wrote:
Hmm. Mike probably needs to look at this, since the rewriting code is his 😊
Adam.
-----Original Message----- From: observiumobservium-bounces@observium.org On Behalf Of Lyndon Labuschagne via observium Sent: 30 January 2019 11:20 To: Observiumobservium@observium.org Cc: Lyndon Labuschagnelyndonl@mobiletorque.co.za;adama@memetic.org Subject: Re: [Observium] Port label parsing - Mikrotik possible bug?
##### Module Start: ports #####
o Caching Oids ifDescr ifType ifOperStatus ifAlias ifName ifHighSpeed ifInMulticastPkts ifOutMulticastPkts ifInBroadcastPkts ifOutBroadcastPkts ifHCInOctets ifHCOutOctets ifHCInUcastPkts ifHCOutUcastPkts ifHCInMulticastPkts ifHCOutMulticastPkts ifHCInBroadcastPkts ifHCOutBroadcastPkts ifInOctets ifOutOctets ifInUcastPkts ifOutUcastPkts ifInNUcastPkts ifOutNUcastPkts ifInDiscards ifOutDiscards ifInErrors ifOutErrors ifInUnknownProtos ifMtu ifSpeed ifPhysAddress ifAdminStatus ifLastChange ifPromiscuousMode ifConnectorPresent, ifIndex: 1 2 3 4 5 6 7 8 10 12 13 14 15 16 17 18 19 20 21 22 23 25 26 27 28 29 30 31 32 33 34 35 36 37 o ADSL-LINE-MIB o EtherLike-MIB dot3StatsDuplexStatus o IP-MIB
Port Disabled. +---------+---------------------------+---------------------------+---------+----------+----------+---------+----------+--------+---------+----+ | ifIndex | Label | Type | Speed | BPS In | BPS Out | Data In | Data Out | PPS In | PPS Out | HC | +---------+---------------------------+---------------------------+---------+----------+----------+---------+----------+--------+---------+----+ | 1 | CoreCore: sfp-sfpplus1- T | Ethernet | 10Gbps | 1.32Gbps | 287Mbps | 12.1GB | 2.64GB | 147k | 110k | Y | | | runk to 6509 | | | | | | | | | | | 2 | CoreCore: sfp-sfpplus2 - | Ethernet | 1Gbps | 15.8Mbps | 40.2Mbps | 149MB | 378MB | 4.64k | 5.85k | Y | | | Link to DC9 | | | | | | | | | | | 3 | CoreCore: sfp-sfpplus3 DF | Ethernet | 1Gbps | 47.6Mbps | 219Mbps | 448MB | 2.02GB | 16.1k | 22.3k | Y |
> On 30 Jan 2019, at 13:18, Adam Armstrong via observiumobservium@observium.org wrote: > > What is an "ifIndex listing"? > > Adam. > > -----Original Message----- > From: observiumobservium-bounces@observium.org On Behalf Of Lyndon Labuschagne via observium > Sent: 30 January 2019 11:11 > To: Observiumobservium@observium.org > Cc: Lyndon Labuschagnelyndonl@mobiletorque.co.za > Subject: [Observium] Port label parsing - Mikrotik possible bug? > > > Hi > > I have picked up that the port cable parsing does not seem to work on Mikrotik routers, > > a port description of > > Core: sfp-sfpplus1- Trunk to 6509 > > becomes > > CoreCore: sfp-sfpplus1- Trunk to 6509 > > An SNMP walk gives be the below > > iso.3.6.1.2.1.2.2.1.2.1 = STRING: "Core: sfp-sfpplus1- Trunk to 6509" > iso.3.6.1.2.1.31.1.1.1.1.1 = STRING: "Core: sfp-sfpplus1- Trunk to 6509" > iso.3.6.1.2.1.55.1.5.1.2.1 = STRING: "Core: sfp-sfpplus1- Trunk to 6509” > > > If I run a poller on the device, the “Descr” under the sensors display shows the correct "Core: sfp-sfpplus1- Trunk to 6509” > but later on under the ifIndex listing the Label there is CoreCore: sfp-sfpplus1- Trunk to 6509 > > > Regards > _______________________________________________ > observium mailing list > observium@observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ > observium mailing list > observium@observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov Observium Limited, http://observium.org
-- Mike Stupalov Observium Limited, http://observium.org