
Have you seen the overall Polling Information page? Go to the main menu > Polling Information.
If you have a device that is particularly slow, go to the device page and then go to the settings menu and then Performance Data to see which poller module could be the cause of the slowdown. -- Cameron Moore
From: observium [mailto:observium-bounces@observium.org] On Behalf Of Gediminas Karcmarinas Sent: Tuesday, November 17, 2015 8:33 AM To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] poller.php performance better ?
I replace original file and put this in config.php. But still is any possibilities to get better performance with poller.php ? On 2015-11-17 16:24, Spencer Ryan wrote: You should never edit defaults.inc.php Put those changes into config.php
Spencer Ryan | Senior Systems Administrator | sryan@arbor.netmailto:sryan@arbor.net Arbor Networks +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.comhttp://www.arbornetworks.com
On Tue, Nov 17, 2015 at 9:22 AM, Gediminas Karčmarinas <gediminas@kava.ltmailto:gediminas@kava.lt> wrote: Hello, Maybe is some way to get better performance with poller.php ? poller-wrapper.py(24406): /opt/observium/poller-wrapper.py: polled 1310 devices in 270 seconds with 40 workers
I already disable in what I don't need in '/opt/observium/includes/defaults.inc.php' $config['mibs']['SNMPv2-MIB'] = 1; $config['mibs']['IF-MIB'] = 1; $config['mibs']['OSPF-MIB'] = 0; $config['mibs']['EIGRP-MIB'] = 0; $config['mibs']['CISCO-MAC-ACCOUNTING-MIB'] = 0; $config['mibs']['JUNIPER-MAC-MIB'] = 0; $config['mibs']['IP-MIB'] = 1; $config['mibs']['IPV6-MIB'] = 0; $config['mibs']['CISCO-IETF-IP-MIB'] = 0; $config['mibs']['BGP4-V2-MIB-JUNIPER'] = 0; $config['mibs']['FORCE10-BGP4-V2-MIB'] = 0; $config['mibs']['BGP4-MIB'] = 0; $config['mibs']['CISCO-BGP4-MIB'] = 0; $config['mibs']['CISCO-CEF-MIB'] = 0; $config['mibs']['ENTITY-MIB'] = 0; $config['mibs']['CISCO-ENTITY-SENSOR-MIB'] = 0; $config['mibs']['ENTITY-SENSOR-MIB'] = 0; $config['mibs']['CISCO-IETF-PW-MPLS-MIB'] = 0; $config['mibs']['CISCO-RTTMON-MIB'] = 0; $config['mibs']['MPLS-L3VPN-STD-MIB'] = 0; $config['mibs']['MPLS-VPN-MIB'] = 0; $config['mibs']['FOUNDRY-SN-SWITCH-GROUP-MIB'] = 0; $config['mibs']['LLDP-MIB'] = 0; $config['mibs']['BRIDGE-MIB'] = 0; $config['mibs']['HOST-RESOURCES-MIB'] = 0; $config['mibs']['Juniper-UNI-ATM-MIB'] = 0; $config['mibs']['UCD-SNMP-MIB'] = 0; $config['mibs']['UCD-DISKIO-MIB'] = 0; $config['mibs']['Q-BRIDGE-MIB'] = 0; $config['mibs']['VMWARE-VMINFO-MIB'] = 0; $config['mibs']['EtherLike-MIB'] = 0;
$config['poller_modules']['unix-agent'] = 0; $config['poller_modules']['ipmi'] = 0; $config['poller_modules']['sensors'] = 1; $config['poller_modules']['status'] = 1; $config['poller_modules']['processors'] = 1; $config['poller_modules']['mempools'] = 1; $config['poller_modules']['storage'] = 1; $config['poller_modules']['netstats'] = 1; $config['poller_modules']['hr-mib'] = 0; $config['poller_modules']['ucd-mib'] = 0; $config['poller_modules']['ipSystemStats'] = 1; $config['poller_modules']['ports'] = 1; $config['poller_modules']['bgp-peers'] = 0; $config['poller_modules']['junose-atm-vp'] = 0; $config['poller_modules']['toner'] = 0; $config['poller_modules']['ucd-diskio'] = 0; $config['poller_modules']['wifi'] = 0; $config['poller_modules']['ospf'] = 0; $config['poller_modules']['cisco-ipsec-flow-monitor'] = 0; $config['poller_modules']['cisco-remote-access-monitor'] = 0; $config['poller_modules']['cisco-cef'] = 0; $config['poller_modules']['cisco-sla'] = 0; $config['poller_modules']['mac-accounting'] = 0; $config['poller_modules']['arista-software-ip-forwarding']= 0; $config['poller_modules']['cipsec-tunnels'] = 0; $config['poller_modules']['loadbalancer'] = 0; $config['poller_modules']['cisco-cbqos'] = 0; $config['poller_modules']['cisco-eigrp'] = 0; $config['poller_modules']['netscaler-vsvr'] = 0; $config['poller_modules']['aruba-controller'] = 0; $config['poller_modules']['entity-physical'] = 0; $config['poller_modules']['applications'] = 0; $config['poller_modules']['fdb-table'] = 1; $config['poller_modules']['graphs'] = 1; $config['poller_modules']['cisco-vpdn'] = 0; $config['poller_modules']['wmi'] = 0;
Hardware : SSD INTEL MEM : 14GB CPU : Intel(R) Xeon(R) CPU E3-1270 v3 @ 3.50GHz
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium