In this case, your device is reporting the high and low alert levels as -40dBm, which would cause it to alert every time.
adam.
On 18/06/2012 07:31, Zafar Pravaiz wrote:
Hi
After upgrading to latest observium i start getting loads of following errors. I don't understand is this a threshold set problem or some IOS bug? Can some one please shed some light?
Observium :: Network Observation and Monitoring
Dbm Alarm: sfsw1 Te2/1 Receive Power Sensor - TenGigabitEthernet2/1 Receive Power Sensor is over threshold: -2.5dBm (> -40dBm)
Observium :: Network Observation and Monitoring
Dbm Alarm: sfsw1 Te2/2 Receive Power Sensor - TenGigabitEthernet2/2 Receive Power Sensor is over threshold: -2.6dBm (> -40dBm)
Observium :: Network Observation and Monitoring
Voltage Alarm: sfsw1 Te2/1 Supply Voltage Sensor - TenGigabitEthernet2/1 Supply Voltage Sensor is over threshold: 0V (> 0V)
Observium :: Network Observation and Monitoring
Dbm Alarm: sfsw2 Te2/1 Receive Power Sensor - TenGigabitEthernet2/1 Receive Power Sensor is over threshold: -2.8dBm (> -40dBm)
Observium :: Network Observation and Monitoring
Dbm Alarm: coresw1.aus.edu Te5/4 Receive Power Sensor - TenGigabitEthernet5/4 Receive Power Sensor is over threshold: 0dBm (> -40dBm)
SFSW1#sh interfaces transceiver detail Transceiver monitoring is disabled for all interfaces.
mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable. ++ : high alarm, + : high warning, - : low warning, -- : low alarm. A2D readouts (if they differ), are reported in parentheses. The threshold values are calibrated.
High Alarm High Warn Low Warn Low Alarm Temperature Threshold Threshold Threshold ThresholdPort (Celsius) (Celsius) (Celsius) (Celsius) (Celsius)
Te2/1 29.5 ++ 0.0 0.0 0.0 0.0 Te2/2 29.1 ++ 0.0 0.0 0.0 0.0
High Alarm High Warn Low Warn Low Alarm Voltage Threshold Threshold Threshold ThresholdPort (Volts) (Volts) (Volts) (Volts) (Volts)
Te2/1 0.00 0.00 0.00 0.00 0.00 Te2/2 0.00 0.00 0.00 0.00 0.00
High Alarm High Warn Low Warn Low Alarm Current Threshold Threshold Threshold ThresholdPort (milliamperes) (mA) (mA) (mA) (mA)
Te2/1 6.1 ++ 0.0 0.0 0.0 0.0 Te2/2 6.7 ++ 0.0 0.0 0.0 0.0
Optical High Alarm High Warn Low Warn Low Alarm Transmit Power Threshold Threshold Threshold ThresholdPort (dBm) (dBm) (dBm) (dBm) (dBm)
Te2/1 -2.9 ++ -40.0 -40.0 -40.0 -40.0 Te2/2 -2.6 ++ -40.0 -40.0 -40.0 -40.0
Optical High Alarm High Warn Low Warn Low Alarm Receive Power Threshold Threshold Threshold ThresholdPort (dBm) (dBm) (dBm) (dBm) (dBm)
Te2/1 -2.5 ++ -40.0 -40.0 -40.0 -40.0 Te2/2 -2.6 ++ -40.0 -40.0 -40.0 -40.0
Thanks
--
*Zafar Pravaiz *IT Senior Systems Engineer Information Technology Department
AUS /> </span><span style='font-size:10.0pt;font-family:Times;mso-bidi-font-family:
Tel +971 6 515 2164 Fax +971 6515 2112
American University of Sharjah PO Box 26666, Sharjah United Arab Emirates http://www.aus.edu http://www.aus.edu/ zpravaiz@aus.edu mailto:youremail@aus.edu
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
