Yeah, what Ron said. I accidentally forgot to give you that command :D
adam. On 06/04/2016 19:09:33, Ron Marosko ron@rjr-services.com wrote: “show interface gig0/0”, adjust the interface numbers appropriately. Here is from one of my routers: GigabitEthernet0/2 is up, line protocol is up Hardware is BCM1250 Internal MAC, address is xxxx.xxxx.xxxx (bia xxxx.xxxx.xxxx) Description: -Internal Network- Internet address is xx.xx.xx.xx/xx MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 37/255, rxload 3/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full Duplex, 1Gbps, media type is RJ45 output flow-control is XON, input flow-control is XON ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters 21w0d Input queue: 0/75/0/223 (size/max/drops/flushes); Total output drops: 1262 Queueing strategy: fifo Output queue: 0/40 (size/max) 30 second input rate 14604000 bits/sec, 9338 packets/sec 30 second output rate 146679000 bits/sec, 14297 packets/sec 3190992794 packets input, 225247867 bytes, 0 no buffer Received 5349037 broadcasts (2747875 IP multicasts) 0 runts, 0 giants, 0 throttles 11 input errors, 0 CRC, 0 frame, 8 overrun, 0 ignored 0 watchdog, 12593127 multicast, 0 pause input 1945505025 packets output, 677645279 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 442 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out As you can see, I’ve had 1262 output drops (tx discards) over the last 21 weeks… but it’s not something that really bothers me as this is an ISP Border router. The rate you’re seeing on your router is really quite low, not really something to be excessively worried about until those numbers go up into the tens or hundreds of packets per second. -- Ron Marosko, Jr. . . . . . . . . . . . . . . . . . . . . . . . . . . CCIE No. 4526 (R/S), NN5DX Senior Network Engineer RJR Services, Inc. 1108 West Dickinson Blvd, Suite A Fort Stockton, TX 79735 USA o: +1 432 336 5600 x115 c: +1 432 290 6344 e: ron@rjr-services.com pgp pubkey: 0x58AB8B5C [http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x778B3B0258AB8B5C] "To know me is to fly with me." From: observium [mailto:observium-bounces@observium.org] On Behalf Of Richard Müller Sent: Wednesday, April 06, 2016 1:02 PM To: observium@observium.org Subject: [Observium] Question Regarding CISCO and TX Discards Hy Observium Community I have a router, which is only accessible via SNMP from my company, and it shows up some TX-Discards Just look on this picture: Unfortunately the company who is administering the Router tells me that they do not see any error. I really do not have a clue which kind of Tx Discards these are and how they can be shown in CLI. Does anybody have a clue which “show” Command I have to tell the guy from the ISP that he is seeing these kinds of errors, also. It is a CISCO2911/K9 and it is a Gigabit Ethernet Interface. Thanks in advance. Richard -- [teamix] [http://www.teamix.de] Richard Müller Geschäftsführer teamix GmbH Südwestpark 43 90449 Nürnberg Tel.: +49 911 30999 0 Fax: +49 911 30999 99 mail: rm@teamix.de [mailto:rm@teamix.de] web: http://www.teamix.de [http://www.teamix.de] blog: http://blog.teamix.de [http://blog.teamix.de] Amtsgericht Nürnberg, HRB 18320 | Geschäftsführer: Oliver Kügow, Richard Müller Systemhaus Check 2016 – wie zufrieden sind Sie? http://umfragen.idgmedia.de/uc/cw/sys2016/ [http://umfragen.idgmedia.de/uc/cw/sys2016/]
-- This message has been scanned for viruses and dangerous content by E.F.A. Project [http://www.efa-project.org], and is believed to be clean. Click here to report this message as spam. [http://smtp.rjr-services.com/cgi-bin/learn-msg.cgi?id=527B460A75.A8895&t...]