Hi Mike

Any update on this after I sent the requested info? I you missed it see attached

Regards

Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614   map | website | company blog | linkedin

CAUTION: This email and any attachments may contain information that is confidential and subject to legal privilege. If you are not the intended recipient, you must not read, use, disseminate, distribute or copy this email or any attachments. If you have received this email in error, please notify us immediately and erase this email and any attachments. Thank you.

DISCLAIMER: To the maximum extent permitted by law, Converged Group is not liable (including in respect of negligence) for viruses or other defects or for changes made to this email or to any attachments. Before opening or using attachments, check them for viruses and other defects. The information contained in this document is confidential to the addressee and is not the view nor the official policy of Converged Group unless otherwise stated.

From: Mike Stupalov [mailto:mike@stupalov.ru] On Behalf Of Mike Stupalov
Sent: Wednesday, 11 December 2019 01:21
To: Observium; Pieter Meyer via observium
Cc: Pieter Meyer
Subject: Re: [Observium] FSCOM snmp issue

Hi Pieter,

 just FSCOM switches not have single standard for Oid tree,
 that model can have another supported MIB and Oid tree.

Try to make full snmp dump and sent it me (personally),
I will try to improve support (if that possible):

snmpwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1 > myagent.snmpwalk
snmpwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1.3.6.1.4.1 >> myagent.snmpwalk


Pieter Meyer via observium wrote on 10.12.2019 18:49:

Hi Guys
 
I seem to have an issue with FS.com switches where the FS-SWITCH-MIB doesn’t 
seem to work correctly
 
I have added a S5800 48F4S about a year ago, and on this switch I get more 
info like DDM info for SFP  modules and CPU and mem info
 
On the working device when running a discovery I get the following under 
sensors for S5800 48F4S
 
#####  Module Start: sensors  #####
 
 o ENTITY-SENSOR-MIB
 o FS-SWITCH-MIB        devMFanSpeed [....] devMSlotEnvironmentValue [.] 
temperCurrent [...] voltageCurrent [...] biasCurrent [...] transpowerCurrent 
[...] receivepowerCurrent [...]
 o FS-SWITCH-MIB        devMFanStatus [....] devMPowerWorkStatus [..] 
devMPowerFanStatus [..]
 
 
 o Duration             1.1965s
 
 
but on other under another S5800 48F4S with same firmware and S5850 48S6Q 
models  I get the below
 
#####  Module Start: sensors  #####
 
 o ENTITY-SENSOR-MIB
 o FS-SWITCH-MIB        devMFanSpeed [] devMSlotEnvironmentValue [] 
temperCurrent [] voltageCurrent [] biasCurrent [] transpowerCurrent [] 
receivepowerCurrent []
 o FS-SWITCH-MIB        devMFanStatus [] devMPowerWorkStatus [] 
devMPowerFanStatus []
 
 
 o Duration             7.4538s
 
 
 
Regards
 
 
        Pieter Meyer
 
Converged Group | Licensed ISP 0258/IECNS/JAN/09
 
75 Witkoppen Rd, North Riding, Gauteng, 2162
 
Office: +27 10 591 4600 | Mobile: +27 83 233 6614
 
_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

--
Mike Stupalov
Observium Limited, http://observium.org