I rebooted to ensure the new config was applied.

I assume there is a better way to do this?

If this was discussed earlier today, I apologise. I only joined this today.

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong
Sent: 24 December 2015 15:56
To: Observium Network Observation System <observium@observium.org>
Subject: Re: [Observium] MikroTik CCR interface graphs show lower throughput

Ports are only removed during discovery.

You'll then need to purge them from the deleted ports page at the bottom of the ports menu.

Adam.

Sent from BlueMail

On 24 Dec 2015, at 15:42, Alasdair MacLeod <Alasdair@jhcs.com> wrote:

No, I just rebooted the server!

Let me try that.

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler
Sent: 24 December 2015 15:40
To: Observium Network Observation System <observium@observium.org>
Subject: Re: [Observium] MikroTik CCR interface graphs show lower throughput

Did you run discovery and poller again?

2015-12-24 13:37 GMT-02:00 Alasdair MacLeod <Alasdair@jhcs.com>:

I made the change but unfortunately it did not resolve the issue L

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler
Sent: 24 December 2015 15:33

To: Observium Network Observation System <observium@observium.org>
Subject: Re: [Observium] MikroTik CCR interface graphs show lower throughput

All configuration you have to do in the config.php! :)

2015-12-24 12:45 GMT-02:00 Alasdair MacLeod <Alasdair@jhcs.com>:

Hi Eduardo,

Where do I add this?

Config.php?

Where is the default location for this?

Thanks.

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler
Sent: 24 December 2015 13:37

To: Observium Network Observation System <observium@observium.org>
Subject: Re: [Observium] MikroTik CCR interface graphs show lower throughput

Try this:

$config['bad_if_regexp'][] = '/^.pppoe-/';
$config['bad_if_regexp'][] = '/^.pptp-/';

2015-12-24 11:33 GMT-02:00 Alasdair MacLeod <Alasdair@jhcs.com>:

Observium also detects all the PPPoE connections as interfaces (not ports).

Is it possible to tell observium to ignore all Ports / Interfaces excluding those I stipulate?

At the moment, on this router im testing with, it has picked up over 800 additional interfaces which I don’t care about. Im concerned that this will be causing it to do way more work than necessary. If I then add in another 60 odd routers and it does the same to them all, it may cause the workload to be too great.

Thanks.

Al

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler
Sent: 24 December 2015 13:27

To: Observium Network Observation System <observium@observium.org>
Subject: Re: [Observium] MikroTik CCR interface graphs show lower throughput

This is a long time bug in Mikrotik, software-devices are 32-bit only.

--

Eduardo Schoedler

2015-12-24 11:11 GMT-02:00 Alasdair MacLeod <Alasdair@jhcs.com>:

No, they are being detected as 32bit. How can I fix that?

Thanks.

Regards

Alasdair MacLeod
Senior Technician

Newark Wireless
JHCS Ltd
27-29 Kirkgate Newark,
Nottinghamshire, NG24 1AD

www.jhcs.com|Alasdair@jhcs.com

Tel | +44 (0) 1636 682 244
Fax | +44 (0) 1636 704 571

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans
Sent: 24 December 2015 12:55
To: Observium Network Observation System <observium@observium.org>
Subject: Re: [Observium] MikroTik CCR interface graphs show lower throughput

Hi,

115Mbit is the limit for 32bit counters, are the ports being detected as 64bit?

(See device > properties > ports)

Tom

On Dec 24, 2015 1:39 PM, Alasdair MacLeod <Alasdair@jhcs.com> wrote:

Hi Guys,

I just started using Observium. Everything looks great except our CCRs are showing much lower throughput on the interfaces than they are actually passing. One interface is passing a fairly consistent 300-400Mbps but Observium graphs it as 100-130Mbps.

Cacti graphs the same interface on the same device correctly so I don’t think it’s the router, I think I must have set something up incorrectly within Observium.

Any pointers on this would be great.

Thanks.

Regards

Alasdair MacLeod
Senior Technician

Newark Wireless
JHCS Ltd
27-29 Kirkgate Newark,
Nottinghamshire, NG24 1AD

www.jhcs.com|Alasdair@jhcs.com

Tel | +44 (0) 1636 682 244
Fax | +44 (0) 1636 704 571

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

--

Eduardo Schoedler

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

--

Eduardo Schoedler

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

--

Eduardo Schoedler
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium