![](https://secure.gravatar.com/avatar/0fa97865a0e1ab36152b6b2299eedb49.jpg?s=120&d=mm&r=g)
It seems that that SNMP stack used on the Cyan devices is broken in such a way that we had to disable bulkwalk, which will totally tank polling speed. Some devices with poor stacks will frequently drop queries half way through, which makes them next to impossible to poll with bulkwalk.
You might get better polling from using the separate get method, but I don’t think that’s in CE at the moment.
Thanks,
Adam.
From: observium observium-bounces@observium.org On Behalf Of Greg Peterson via observium Sent: 07 August 2019 22:04 To: Observium observium@observium.org Cc: Greg Peterson gpeterson@nescmn.net Subject: Re: [Observium] snmpwalk performance
They are Ciena(Cyan)z77’s running OS 10.0.03-0002. The ones I have trouble with have 10 cards in them with each card having 2 20 Gig Xuai ports,4 10 Gig ports and 12 1 gig ports. So 40 10 Gib ports and 120 1 Gig ports. When a service is created with in the device it creates multiple flow domains( virtual ports). I am using the community edition ver 18.9.9420.
Greg
From: observium [mailto:observium-bounces@observium.org] On Behalf Of Markus Klock via observium Sent: Wednesday, August 07, 2019 2:58 PM To: Observium <observium@observium.org mailto:observium@observium.org > Cc: Markus Klock <markus@best-practice.se mailto:markus@best-practice.se > Subject: Re: [Observium] snmpwalk performance
Hi Greg,
can you tells us more about what kind of device this is? I assume a switch?
What vendor and what model is this?
/Markus
Den ons 7 aug. 2019 kl 21:04 skrev Christian Eriksson via observium <observium@observium.org mailto:observium@observium.org >:
Check out SNMP Maximum Repetitions at https://docs.observium.org/tuning/ https://docs.observium.org/tuning/
/Christian
Från: observium <observium-bounces@observium.org mailto:observium-bounces@observium.org > För Greg Peterson via observium Skickat: den 7 augusti 2019 20:17 Till: observium@observium.org mailto:observium@observium.org Kopia: Greg Peterson <gpeterson@nescmn.net mailto:gpeterson@nescmn.net > Ämne: [Observium] snmpwalk performance
I’m having a problem polling my high capacity devices. The following command can take up to 18 minutes to complete due to the number and interfaces. The command is /usr/bin/snmpwalk -v2c -c 'XXXXX' -Pu -OQUs -m IF-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':’x.x.x.x’:'161' ifEntry. Do the pro or enterprise versions change the way they poll devices? Are there configuration setting I can change to make? The devices I am polling have upwards of 1000 interfaces.
Gregory Peterson
NEW email gpeterson@nescmn.net mailto:gpeterson@nescmn.net
IT Operations Supervisor
Northeast Service Cooperative
5525 Emerald Ave, Mt. Iron, 55768
218.741.0750 Office
218.748.7608 Direct
www.nesc.k12.mn.us http://www.nesc.k12.mn.us
_______________________________________________ observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium