The [] on the end of the variable signifies an entry in the 'rancid_configs' array.
You need to replicate the entire line, each time with a different directory.
The difference between " and ' is that things within "" are prarsed by PHP to expand variables, in this instance it makes no difference and you should use ' as it's slightly quicker.
adam
On 02/08/2012 15:20, Moermond, Timothy wrote:
I have tried setting up the array, as follows;
$config['rancid_configs'][] = array("/usr/local/rancid/var/corenetwork/configs/", "/usr/local/rancid/var/branchnetwork/configs/", "/usr/local/rancid/var/voicenetwork/configs/", "/usr/local/rancid/var/drnetwork/configs/");
However it still does not seem to be pulling the configs, I also tried using single quote as well with not affect. If I use just a single path like below it works for the devices in that directory.
$config['rancid_configs'][] = "/usr/local/rancid/var/corenetwork/configs/";
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 9:04 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
http://www.observium.org/wiki/Configuration_Options#Rancid
On 02/08/2012 14:40, Moermond, Timothy wrote:
I discovered the issue, I have multiple directory groups in rancid, can the location in the config.php file for the rancid directory contain multiple entries or can there be multiple rancid location entries?
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
All we do is check if there is a file in the rancid directory with the hostname of the router, nothing complex is done.
Your filename DOES NOT MATCH. Check again.
adam.
On 02/08/2012 14:14, Moermond, Timothy wrote:
Hi Tom,
I have double checked and the name is the same. It is the only device the config doesn't show up on the tabs.
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Thursday, August 02, 2012 8:07 AM To: observium@observium.org Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
Hi Timothy,
On Thu, 2012-08-02 at 08:05 -0500, Moermond, Timothy wrote:
I have situation where Observium shows VRF information for all of my 2800 series routers but not my 2900 series router. Also the config tab is not showing up either from the rancid integration, but it does for all of my 2800 series routers.
I cannot comment on the VRF issue (probably an IOS "feature"), but the rancid integration is a simple as comparing your rancid hostnames to observium hostnames. No device type or model numbers involved...
Tom
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium