Ok, then my memory is worse off than I thought.... :D
On 22/06/2012 1:15, Adam Armstrong wrote:
You did fix sensors, because when i
went to fix it, it was already fixed, and i didn't do it :P
On 22/06/2012 00:13, Tom Laermans wrote:
I didn't touch sensors though, maybe that's still broken?
I did fix storage and processors.
Keep us posted if there's still something broken :-)
Tom
On 22/06/2012 1:06, Morgan McLean wrote:
I know it isn't compiled, I guess thats just habit
from work :).
I wasn't even sure this was a bug when I emailed
in, I thought maybe I didn't have a flag set. The
documentation on sensors was a bit wonky.
I do see some notes regarding some of the things I
mentioned, so I will svn update and see how that goes.
Sorry, this project is more active than I originally
thought!
Morgan
On Thu, Jun 21, 2012 at 3:55 PM,
Adam Armstrong <adama@memetic.org>
wrote:
a) there are no 'builds', observium is not
compiled.
rule #1 of reporting bugs is that you make sure the
bug isn't fixed before you report it.
adam.
On 21/06/2012 23:49, Morgan McLean wrote:
I checked out the most
recent build from SVN monday or tuesday.
This is literally all juniper gear. EX
switches, SRX firewalls, MX routers
A server I have added does this:
2012-06-21 12:38:16SystemProcessor
added: type hr index 805 descr Intel Xeon
E7540 @ 2.00GHz
2012-06-21 06:38:20SystemProcessor
added: type hr index 805 descr Intel Xeon
E7540 @ 2.00GHz
2012-06-21 00:38:34SystemProcessor
added: type hr index 805 descr Intel Xeon
E7540 @ 2.00GHz
2012-06-20 18:38:25SystemProcessor
added: type hr index 805 descr Intel Xeon
E7540 @ 2.00GHz
2012-06-20 12:38:22SystemProcessor
added: type hr index 805 descr Intel Xeon
E7540 @ 2.00GHz
an APC managed 0u strip looks like:
21/Jun/12 12:38:13
Sensor Added: current apc 1 Output
21/Jun/12 12:38:12
Sensor
Added: voltage apc 1 Input
21/Jun/12 12:38:12
Sensor
Added: voltage apc 1 Input
21/Jun/12 06:38:17
Sensor
Added: current apc 1 Output
21/Jun/12 06:38:16
Sensor
Added: voltage apc 1 Input
21/Jun/12 06:38:16
Sensor
Added: voltage apc 1 Input
21/Jun/12 00:38:32
Sensor
Added: current apc 1 Output
21/Jun/12 00:38:30
Sensor
Added: voltage apc 1 Input
21/Jun/12 00:38:29
Sensor
Added: voltage apc 1 Input
20/Jun/12 18:38:21
Sensor
Added: current apc 1 Output
On Thu, Jun 21, 2012
at 3:29 PM, Adam Armstrong <adama@memetic.org>
wrote:
Sounds like nonsense to me.
When did you last update?
adam.
On 21/06/2012 22:51, Morgan McLean
wrote:
The only
thing thats working in the memory
graphing for junos devices.
Everything else is seen by
discovery but not acted on.
Inventory doesn't populate
either, but thats maybe another
topic.
Morgan
On Thu,
Jun 21, 2012 at 2:02 PM, Adam
Armstrong <adama@memetic.org>
wrote:
Hmm. Did tom not
already fix this?
adam.
On 21/06/2012 21:25,
Adam Armstrong
wrote:
Hmm. I think I
have the same
problem elsewhere
(processors), and
I think I know
what it is.
Let me fix it :)
adam.
On 21/06/2012
21:21, Morgan
McLean wrote:
My
logs look like
this...any idea
why its not
picking up? I have
about 50 juniper
devices, an APC
device and a
couple others and
it doesn't seem to
monitor or graph
any of the
sensors. I have
seen some
information about
sensor
configuration
under config.php,
but it wasn't very
helpful.
Every time
the discovery
runs, or maybe
its the poller,
not sure, it
finds all these
sensors for
every device,
but it does
nothing with
them.
Is there a
switch I need to
flip?
Thanks!
Morgan
21/Jun/12
12:39:04
Sensor Added:
temperature
junos 6.1.0.0
TFEB MX80
21/Jun/12
12:39:04
Sensor
Added:
temperature
junos 6.1.1.0
TFEB Intake
21/Jun/12
12:39:04
Sensor
Added:
temperature
junos 9.1.0.0
Routing Engine
21/Jun/12
12:39:03
Processor
added: type
junos index
6.1.0.0 descr
TFEB MX80
21/Jun/12
12:39:03
Processor
added: type
junos index
7.1.0.0 descr
FPC @ 0/*/*
21/Jun/12
12:39:03
Processor
added: type
junos index
7.2.0.0 descr
FPC @ 1/*/*
21/Jun/12
12:39:03
Processor
added: type
junos index
9.1.0.0 descr
Routing Engine
