Hi All,
We are seeing an interesting issue when looking at a Mikrotik Routerboard (RB951 MikroTik RouterOS 6.13)
When performing an snmpwalk of the device, we see the pppoe client interfaces (counters, gauges, timers etc) as expected.
When we perform a Observium discovery of the device, it seems to be counting the 13 interfaces, but shows “XX” for the 2 PPPoE client interfaces.
Output of the CPE and Discover & Poller below.
List of Interfaces === Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE MTU L2MTU MAX-L2MTU 0 R ;;; Cust: Gale Insurance [25Mbit] (25/10 NBN NTD000006105558) {GALE-C...
ether1 ether 1500 1598 4074 1 R ;;; Cust: Gale Insurance [20Mbit] (Telstra Internet Direct ADSL) {GAL...
ether2 ether 1500 1598 4074 2 X ;;; LAN - Trunk Interface ether3 ether 1500 1598 4074 3 RS ;;; LAN - DATA subnet, untagged ether4 ether 1500 1598 4074 4 XS ;;; LAN - VoIP subnet, untagged ether5 ether 1500 1598 4074 5 X wlan1 wlan 1500 2290 6 R bridge1-data bridge 1500 1598 7 R bridge2-voip bridge 1500 1598 8 R lo0 bridge 1500 65535 9 R ;;; PPPoE for FTTx Service pppoe-FTTx pppoe-out 1480 10 R ;;; PPPoE for xDSL Service pppoe-xDSL pppoe-out 1500 11 XS ;;; DATA subnet, tagged
Discovery Output ===
Observium v0.14.7.5731 Discovery
Current Revision : 5731 New Revision : 5731
103.253.92.23.rdns.zone 3 routeros Ports : ..........XX. Port Stacks: Processors : hrDevice: .. Memory : HOST-RESOURCES-MIB . IPv4 Addresses : .. IPv6 Addresses : Sensors: MIKROTIK-MIB ENTITY-SENSOR-MIB Storage : HOST-RESOURCES-MIB: . Inventory: Physical Inventory : .. hrDevice : . MIKROTIK-MIB . Discovery protocols: LLDP-MIB CISCO-CDP-MIB OSPF Neighbours: ARP/NDP Tables : BGP Sessions: No BGP on host VLANs: Q-BRIDGE-MIB UCD Disk IO : Discovered in 9.473 seconds
Poller Output ===
Observium v0.14.7.5731 Poller
Starting polling run:
103.253.92.23.rdns.zone 3 routeros Module [ unix-agent ] disabled globally. Module [ ipmi ] excluded for device. Module [ junose-atm-vp ] excluded for device. Module [ cisco-ipsec-flow-monitor ] excluded for device. Module [ cisco-remote-access-monitor ] excluded for device. Module [ cisco-cef ] excluded for device. Module [ cisco-sla ] excluded for device. Module [ arista-software-ip-forwarding ] excluded for device. Module [ cipsec-tunnels ] excluded for device. Module [ cisco-ace-loadbalancer ] excluded for device. Module [ cisco-ace-serverfarms ] excluded for device. Module [ cisco-cbqos ] excluded for device. Module [ cisco-eigrp ] excluded for device. Module [ netscaler-vsvr ] excluded for device. Module [ aruba-controller ] excluded for device. Module [ cisco-vpdn ] disabled globally. Module [ wmi ] disabled globally. Uptime: 21 days, 22h 56m 46s Module time: 0.8838s
Hardware: RB951G-2HnD Version: 6.13 Features: Level 4 Serial: Asset: Module time: 0.2185s Module time: 0.0011s Processor Processor 6%
Checking alerts Processor Average 6%
Checking alerts Module time: 1.5665s Mempool main memory: 22.59%
Checking alerts
Module time: 0.706s Storage disk: system: 12.98%
Checking alerts
Module time: 0.4528s Netstats: Module time: 0.3009s HR Stats: Module time: 0.0517s Module time: 0.2457s Polling IP-MIB ipSystemStats Module time: 0.096s Caching Oids: ifEntry ifXEntry dot3StatsDuplexStatus Port ether1(1) replacing with 64-bit...VLAN == bps(25.2kbps/107kbps)bytes(166kB/711kB)pkts(22.3pps/25.2pps) Checking alerts
Port ether2(2) replacing with 64-bit...VLAN == bps(1.69kbps/73bps)bytes(11.1kB/494B)pkts(0.61pps/74.0mpps) Checking alerts
Port ether3(3) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port ether4(4) replacing with 64-bit...VLAN == bps(11.7kbps/8.06kbps)bytes(77.5kB/53.0kB)pkts(12.4pps/4.06pps) Checking alerts
Port ether5(5) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port wlan1(6) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port bridge1-data(9) replacing with 64-bit...VLAN == bps(9.5kbps/7.57kbps)bytes(62.6kB/49.8kB)pkts(12.4pps/3.57pps) Checking alerts
Port bridge2-voip(10) replacing with 64-bit...VLAN == bps(0bps/39bps)bytes(0B/263B)pkts(0pps/37.0mpps) Checking alerts
Port vlan10-data(11) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port vlan20-voice(12) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port lo0(17) replacing with 64-bit...VLAN == bps(0bps/34bps)bytes(0B/232B)pkts(0pps/37.0mpps) Checking alerts
Module time: 14.5479s BGP Peers: Module time: 0.0452s Module time: 0.0011s Module time: 0.0007s Wireless: Module time: 0.0017s OSPF: Processes: Areas: Ports: Neighbours: Module time: 0.093s Mac Accounting: Caching DB...0 entries. Module time: 0.0019s Entity Physical: Module time: 0.0008s Module time: 0.0005s FDB Tables Module time: 0.1898s Module time: 0.0006s ping ping_snmp uptime processor mempool storage fdb_count poller_perf Polled in 20.0717 seconds UPDATED!
Greg Lipschitz Director
Summit IT Managementhttp://www.thesummitgroup.com.au | Summit Internethttp://www.summitinternet.com.au | Summit Creativehttp://www.summitcreative.com.au - ‘reach your peak’ Divisions of The Summit Group (Australia) Pty Ltd
Phone (Australia): 1300 049 749 Phone (US & Canada): (321) 216 3844 E-mail: Greg@thesummitgroup.com.aumailto:Greg@thesummitgroup.com.au
Internet: http://www.thesummitgroup.com.au/http://www.thesummitgroup.com.au Address: Level 1, 39 Railway Road, Blackburn VIC 3130 Postal: P.O. Box 3225, Doncaster East VIC 3109
Follow us on Facebookhttp://www.facebook.com/thesummitgroup/ | LinkedInhttp://www.linkedin.com/company/1942329 | Twitterhttp://twitter.com/summitgroupau/
-- ExchangeDefender Message Security: Click below to verify authenticity https://admin.exchangedefender.com/verify.php?id=s713NcPw013883&from=gre...