Prodware France
T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Hi,
Well, according to this link :
https://kb.juniper.net/library/CUSTOMERSERVICE/GLOBAL_JTAC/BK26199/SRX%20SNMP%20Monitoring%20Guide_v1.1.pdf
It should be under jnxFanFailure or 1.3.6.1.4.1.2636.4.1.2, equivalent to CLI command ‘show chassis fan’, but no answer :
{primary:node0}
root@fw01-par01> show snmp mib walk ascii jnxFanFailure
{primary:node0}
root@fw01-par01> show snmp mib walk ascii 1.3.6.1.4.1.2636.4.1.2
I’ll confirm that with JTAC and ask for involved OIDs/MIBs and revert back.
However, note that also don’t get CPU temp which answers to queries via CLI :
{primary:node0}
root@fw01-par01> show snmp mib walk ascii
jnxOperatingTemp
jnxOperatingTemp.1.1.0.0 = 0
jnxOperatingTemp.1.2.0.0 = 0
jnxOperatingTemp.2.1.1.0 = 0
jnxOperatingTemp.2.1.2.0 = 0
jnxOperatingTemp.2.2.1.0 = 0
jnxOperatingTemp.2.2.2.0 = 0
jnxOperatingTemp.7.1.0.0 = 0
jnxOperatingTemp.7.2.0.0 = 0
jnxOperatingTemp.8.1.1.0 = 0
jnxOperatingTemp.8.2.1.0 = 0
jnxOperatingTemp.9.1.0.0 = 29
jnxOperatingTemp.9.1.1.0 = 0
jnxOperatingTemp.9.2.0.0 = 22
jnxOperatingTemp.9.2.1.0 = 0
{primary:node0}
root@fw01-par01> show snmp mib walk ascii
1.3.6.1.4.1.2636.3.1.13.1.7
jnxOperatingTemp.1.1.0.0 = 0
jnxOperatingTemp.1.2.0.0 = 0
jnxOperatingTemp.2.1.1.0 = 0
jnxOperatingTemp.2.1.2.0 = 0
jnxOperatingTemp.2.2.1.0 = 0
jnxOperatingTemp.2.2.2.0 = 0
jnxOperatingTemp.7.1.0.0 = 0
jnxOperatingTemp.7.2.0.0 = 0
jnxOperatingTemp.8.1.1.0 = 0
jnxOperatingTemp.8.2.1.0 = 0
jnxOperatingTemp.9.1.0.0 = 29
jnxOperatingTemp.9.1.1.0 = 0
jnxOperatingTemp.9.2.0.0 = 22
jnxOperatingTemp.9.2.1.0 = 0
I guess there is something you could do about this. Right ?
Best regards.
| Youssef BENGELLOUN - ZAHR -
Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr |
|
|
|
Web : prodware.fr
|
De : observium <observium-bounces@observium.org> au nom de Adam Armstrong <adama@observium.org>
Répondre à : Observium <observium@observium.org>
Date : mercredi 22 novembre 2017 à 18:13
À : "observium@observium.org" <observium@observium.org>
Objet : Re: [Observium] SRX4200 FAN status missing
What are the OIDs? Is your device returning data for them?
adam.
Adam Armstrong
CEO & Lead Architect
Observium Limited
On 2017-11-22 09:27:05, Youssef BENGELLOUN - ZAHR <ybzahr@prodware.fr> wrote:
Hello community,
Any hints regarding this subject ?
Best regards.
Youssef BENGELLOUN - ZAHR - Consultant Expert
Prodware France
T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr
De : Youssef BENGELLOUN - ZAHR <ybzahr@prodware.fr>
Date : mardi 21 novembre 2017 à 14:40
À : Observium <observium@observium.org>
Objet : SRX4200 FAN status missing
Hi,
Running an SRX4200 cluster (Junos 15.1X49-D110), I’m not able to see the FANs’ status / spinning speed :
root@fw01-par01> show chassis fan
node0:
--------------------------------------------------------------------------
Item Status RPM Measurement
FPC 0 Tray 0 Fan 0 OK 8181 Spinning at normal speed
FPC 0 Tray 0 Fan 1 OK 9000 Spinning at normal speed
FPC 0 Tray 1 Fan 0 OK 8083 Spinning at normal speed
FPC 0 Tray 1 Fan 1 OK 8940 Spinning at normal speed
FPC 0 Tray 2 Fan 0 OK 7941 Spinning at normal speed
FPC 0 Tray 2 Fan 1 OK 9183 Spinning at normal speed
FPC 0 Tray 3 Fan 0 OK 8132 Spinning at normal speed
FPC 0 Tray 3 Fan 1 OK 8940 Spinning at normal speed
root@fw01-par01> show chassis environment
node0:
--------------------------------------------------------------------------
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
FPC 0 Power Supply 1 OK
Temp System Temp1 - Front OK 29 degrees C / 84 degrees F
System Temp2 - Back OK 39 degrees C / 102 degrees F
CPU0 Temp OK 70 degrees C / 158 degrees F
CPU1 Temp OK 61 degrees C / 141 degrees F
Fans FPC 0 Fan Tray 0 OK Spinning at normal speed
FPC 0 Fan Tray 1 OK Spinning at normal speed
FPC 0 Fan Tray 2 OK Spinning at normal speed
FPC 0 Fan Tray 3 OK Spinning at normal speed
Attached are sensors and status pollers run in debug, no mention at all of the required OIDs. According to Juniper documentation :
Is this something missing on Observium side ?
Thank you.
