its probably because they do not change. If you poll the ifOutOctets again, has it increased? If its the same every time Observium polls is then the rate is 0 as no new packets have exited that port. /Markus
Den tis 22 jan. 2019 kl 13:38 skrev Simon Mousey Smith via observium < observium@observium.org>:
HI,
The other strange thing I have noticed if I take my g1 main interface in port
Yes the ifInOctets are 0, but the ifOutOctets are 595141390
But yet observium is showing ifOutOctets as 0 ???
Same with broadcastpkts?
Any ideas?
[1] => array( [ifIndex] => string(1) "1" [ifDescr] => string(18) "Ethernet Interface" [ifType] => string(14) "ethernetCsmacd" [ifMtu] => string(4) "1500" [ifSpeed] => string(10) "1000000000" [ifPhysAddress] => string(17) "d8:5d:4c:86:fd:37" [ifAdminStatus] => string(2) "up" [ifOperStatus] => string(2) "up" [ifLastChange] => string(13) "19:2:38:31.90" [ifInOctets] => string(1) "0" [ifInUcastPkts] => string(9) "104037994" [ifInNUcastPkts] => string(1) "0" [ifInErrors] => string(1) "0" [ifInUnknownProtos] => string(1) "0" [ifOutOctets] => string(9) "595141390" [ifOutUcastPkts] => string(1) "0" [ifOutNUcastPkts] => string(7) "4453773" [ifOutDiscards] => string(1) "0" [ifSpecific] => string(11) "zeroDotZero" [ifName] => string(2) "g1" [ifInMulticastPkts] => string(1) "0" [ifInBroadcastPkts] => string(8) "13670731" [ifOutMulticastPkts] => string(1) "0" [ifOutBroadcastPkts] => string(6) "284703" [ifHCInOctets] => string(1) "0" [ifHCInMulticastPkts] => string(1) "0" [ifHCInBroadcastPkts] => string(1) "0" [ifHCOutOctets] => string(1) "0" [ifHCOutMulticastPkts] => string(1) "0" [ifHCOutBroadcastPkts] => string(1) "0" [ifLinkUpDownTrapEnable] => string(7) "enabled" [ifHighSpeed] => string(1) "0" [ifPromiscuousMode] => string(4) "true" [ifConnectorPresent] => string(4) "true" [ifAlias] => string(6) "MainIn" [ifCounterDiscontinuityTime] => string(12) "0:0:00:00.00" [dot3StatsDuplexStatus] => string(10) "fullDuplex" [ifVlan] => string(1) "1" [ifTrunk] => string(0) "" )
Processing port ifIndex 1 with function process_port_label() Processing port ifIndex 1 with function process_port_etherlike() 64-bit, IFLASTCHANGE unknown/false, used system times. MainIn
ifInOctets (0 B) 0 Bps 120 secs
ifOutOctets (0 B) 0 Bps 120 secs
ifInErrors (0 B) 0 Bps 120 secs
ifOutErrors (0 B) 0 Bps 120 secs
ifInUcastPkts (0 B) 0 Bps 120 secs
ifOutUcastPkts (0 B) 0 Bps 120 secs
ifInNUcastPkts (0 B) 0 Bps 120 secs
ifOutNUcastPkts (0 B) 0 Bps 120 secs
ifInBroadcastPkts (0 B) 0 Bps 120 secs
ifOutBroadcastPkts (0 B) 0 Bps 120 secs
ifInMulticastPkts (0 B) 0 Bps 120 secs
ifOutMulticastPkts (0 B) 0 Bps 120 secs
ifInDiscards (0 B) 0 Bps 120 secs
ifOutDiscards (0 B) 0 Bps 120 secs
Regards
Simon
On 22 Jan 2019, at 12:19, Markus Klock via observium < observium@observium.org> wrote:
When a vendor fails to even implement IF-MIB you know they suck at SNMP... /Markus
Den tis 22 jan. 2019 kl 13:11 skrev Adam Armstrong via observium < observium@observium.org>:
Ahh, stupid vendors!
adam.
On 2019-01-22 12:09:18, Mike Stupalov via observium < observium@observium.org> wrote: Hi,
write to vendor.. this device return empty counters (and not for all indexes):
ifHCInOctets.1 = 0 ifHCInOctets.2 = 0 ifHCInOctets.3 = 0 ifHCInOctets.4 = 0 ifHCInOctets.5 = 0
ifHCOutOctets.1 = 0 ifHCOutOctets.2 = 0 ifHCOutOctets.3 = 0 ifHCOutOctets.4 = 0
but some ports still return non-HC counters: ifInOctets.6 = 1133938806 ifInOctets.7 = 555769688
ifOutOctets.1 = 595141390 ifOutOctets.2 = 708574072 ifOutOctets.3 = 4019307600 ifOutOctets.4 = 0 ifOutOctets.5 = 0 ifOutOctets.6 = 1351693276 ifOutOctets.7 = 1926878970
but anyway - we prefer HC counters, and randomly empty counters seems as device or firmware broken.
Adam Armstrong via observium wrote on 22.01.19 15:04:
Walk ifInOctets and ifOutOctets and see if those ports' counters are changing over time.
adam.
On 2019-01-22 10:25:46, Simon Mousey Smith via observium observium@observium.org observium@observium.org wrote: Hi All,
Im trying to work out if the is something wrong with my switch or observium?
Observium detects all the ports fine, vlans fine,
But its not showing any traffic on the ports?
And when I run the -dd in the poller.php the output shows that the is traffic on the ports?
Attached is the debug and a screenshot showing the ports in observium
Regards
Simon_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov Observium Limited, http://observium.org
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium