Better to just fetch sysObjectID.0 or sysDescr.0 instead of a walk to start with.
snmpget -v2c -c <community> 172.30.2.21 sysDescr.0 Using v3 auth on commandline is messy, I'd recommend making it work with v2c if you don't understand the complexities. adam. On Jul 14 2021, at 5:05 pm, Ahmed Rahal via observium observium@observium.org wrote:
Hi Joyce,
Try debugging on the command line from the Observium host: snmpwalk -v2c -c <your_snmpv2_community> 172.30.2.21
This should pull a lot of text. If this command does not succeed, make sure you can reach your target on port 161/udp (check your firewalls).
If snmpwalk returns content, try adding the node through the command line: /opt/observium/add_device.php 172.30.2.21 <your_snmpv2_community>
That will likely tell you what's wrong.
HTH,
Ahmed. Le mer. 14 juill. 2021, à 10 h 39, Njoroge, Joyce (Stadt Ulm) via observium <observium@observium.org (mailto:observium@observium.org)> a écrit :
Hallo,
I am having a problem adding a few of my devices to the Observium Server. I use the same parameters for the other devices but with the few that couldn't be added, I am getting the following message.
I have tried to change SNMP authentication using different protocol versions but I still get an error message.
Obsevium version is Observium CE 20.9.10731.
I will appreciate your help.
Regards, Joyce _______________________________________________ observium mailing list observium@observium.org (mailto:observium@observium.org) http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Ahmed Rahal
Administrateur de Systèmes / Systems Administrator
Fibrenoire - www.fibrenoire.ca (http://www.fibrenoire.ca/) A: 550 , avenue Beaumont, bureau 320, Montréal (Québec) H3N 1V1
arahal@fibrenoire.ca (mailto:arahal@fibrenoire.ca) Twitter: @fibrenoire
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium