I also have this issue; most recent CE. I am running zone firewall on a 2821 ISR, and the firewall graph will not enable even though the control appears to turn on.

On Sun, Sep 6, 2015 at 10:24 PM, Willie Van Waveren < Willie.VanWaveren@spark.co.nz> wrote:

Hi Observium team,

I recently installed Observium and got it running on a bunch of devices. I am now trying to get it to graph zone based firewall stats on Cisco ASR and also ISR.

When I go into settings on the devices and click to enable the firewall graph it seems to enable, but then when I go and look again it is back to disabled.

Am I missing anything?

I would like to have the following in the firewall graph, how can I edit, or add a new one for all Cisco ZBF.

*1.3.6.1.4.1.9.9.491.1.1.1.4.0*

"The number of connections which were attempted to

be setup but which were declined due to

non-availability of required resources.

This value is accumulated from the last reboot of

the firewall."

*1.3.6.1.4.1.9.9.491.1.1.1.5.0*

"The number of connections which are in the process

of being setup but which have not yet reached the

established state in the connection table."

*1.3.6.1.4.1.9.9.491.1.1.1.6.0*

"The number of connections which are currently active."

*1.3.6.1.4.1.9.9.491.1.1.1.11.0*

"The averaged number of connections which the firewall

establishing per second, averaged over the last 300

seconds."

Regards,

Willie

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium