Re: [Observium] CheckPoint alert creation problem
Have you selected the right entity type when adding an alert-checker? It needs to be of type “sensor” , it doesn’t work when you leave it on “device”
Maarten
From: observium observium-bounces@observium.org on behalf of Laszlo Nemeth laszlo.nemeth@emarsys.com Reply-To: Observium Network Observation System observium@observium.org Date: Friday, October 28, 2016 at 3:37 PM To: Observium Network Observation System observium@observium.org Subject: [Observium] CheckPoint alert creation problem
Hello,
I have a CheckPoint 2205 device. It is supported by Observium, so we love it :D
I would like to create an alert for it’s fan speed.
I do a normal alert like our other looks like:
Device: hostname match *cpfw01* Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000
With this settings if i push a Rebuild, it shows 0 entities.
How can i check what is wrong? I tried to change the fanspeed to temperature, but the problem is similar, 0 entities after rebuild.
I attached a picture about the graphs of the device.
Hmm... if i run a „rebuild” there are see lot of devices but there is no any „FW” devices however we have more whit this FW prefix. May be this is the problem? It looks like this list doesn’t show all of our devices.
Thanks
Br Laszlo
Hi
Yes, I set it to Sensor type. But it looks like the check not match with any device. I have more than 50 check, this is the only that not match with any device’s sensor.
Laszlo
From: observium observium-bounces@observium.org on behalf of "Moerman, Maarten" mmoerman@ebay.com Reply-To: Observium Network Observation System observium@observium.org Date: 2016. October 28., Friday 16:23 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] CheckPoint alert creation problem
Have you selected the right entity type when adding an alert-checker? It needs to be of type “sensor” , it doesn’t work when you leave it on “device”
Maarten
From: observium observium-bounces@observium.org on behalf of Laszlo Nemeth laszlo.nemeth@emarsys.com Reply-To: Observium Network Observation System observium@observium.org Date: Friday, October 28, 2016 at 3:37 PM To: Observium Network Observation System observium@observium.org Subject: [Observium] CheckPoint alert creation problem
Hello,
I have a CheckPoint 2205 device. It is supported by Observium, so we love it :D
I would like to create an alert for it’s fan speed.
I do a normal alert like our other looks like:
Device: hostname match *cpfw01* Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000
With this settings if i push a Rebuild, it shows 0 entities.
How can i check what is wrong? I tried to change the fanspeed to temperature, but the problem is similar, 0 entities after rebuild.
I attached a picture about the graphs of the device.
Hmm... if i run a „rebuild” there are see lot of devices but there is no any „FW” devices however we have more whit this FW prefix. May be this is the problem? It looks like this list doesn’t show all of our devices.
Thanks
Br Laszlo
I made a little debug.
So the alert:
Device: hostname match *fw* Entity type: Sensor Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000
Result: no any device match
If I replace the hostname with “hostname match * “ it match with 4 device’s 38 “fanspeed” sensor. But this devices are Cisco routers (ASR) and PC Linux servers. No any firewall that have fanspeed sensor (more than 10 devices there I see the Fanspeed RRD graphs under these devices HEALTH menu) ).
So looks like if the device not ASR or PC (yes I know it is may be not correct, but from my point of view this is the situation) the Observium (8039) not recognize the fanspeed sensors as fanspeed sensor.
Laszlo
From: observium observium-bounces@observium.org on behalf of Laszlo Nemeth laszlo.nemeth@emarsys.com Reply-To: Observium Network Observation System observium@observium.org Date: 2016. November 2., Wednesday 9:33 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] CheckPoint alert creation problem
Ez a feladó nem felelt meg a csalást ellenőrző vizsgálatunkon, és lehet, hogy nem az, akinek tűnik. Információ az identitáshamisításrólhttp://aka.ms/LearnAboutSpoofing
Visszajelzéshttp://aka.ms/SafetyTipsFeedback
Hi
Yes, I set it to Sensor type. But it looks like the check not match with any device. I have more than 50 check, this is the only that not match with any device’s sensor.
Laszlo
From: observium observium-bounces@observium.org on behalf of "Moerman, Maarten" mmoerman@ebay.com Reply-To: Observium Network Observation System observium@observium.org Date: 2016. October 28., Friday 16:23 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] CheckPoint alert creation problem
Have you selected the right entity type when adding an alert-checker? It needs to be of type “sensor” , it doesn’t work when you leave it on “device”
Maarten
From: observium observium-bounces@observium.org on behalf of Laszlo Nemeth laszlo.nemeth@emarsys.com Reply-To: Observium Network Observation System observium@observium.org Date: Friday, October 28, 2016 at 3:37 PM To: Observium Network Observation System observium@observium.org Subject: [Observium] CheckPoint alert creation problem
Hello,
I have a CheckPoint 2205 device. It is supported by Observium, so we love it :D
I would like to create an alert for it’s fan speed.
I do a normal alert like our other looks like:
Device: hostname match *cpfw01* Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000
With this settings if i push a Rebuild, it shows 0 entities.
How can i check what is wrong? I tried to change the fanspeed to temperature, but the problem is similar, 0 entities after rebuild.
I attached a picture about the graphs of the device.
Hmm... if i run a „rebuild” there are see lot of devices but there is no any „FW” devices however we have more whit this FW prefix. May be this is the problem? It looks like this list doesn’t show all of our devices.
Thanks
Br Laszlo
You should give some developer access to a checkpoint to verify if this is the case then.
Maarten
From: observium observium-bounces@observium.org on behalf of Laszlo Nemeth laszlo.nemeth@emarsys.com Reply-To: Observium Network Observation System observium@observium.org Date: Wednesday, November 2, 2016 at 11:17 AM To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] CheckPoint alert creation problem
I made a little debug.
So the alert:
Device: hostname match *fw* Entity type: Sensor Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000
Result: no any device match
If I replace the hostname with “hostname match * “ it match with 4 device’s 38 “fanspeed” sensor. But this devices are Cisco routers (ASR) and PC Linux servers. No any firewall that have fanspeed sensor (more than 10 devices there I see the Fanspeed RRD graphs under these devices HEALTH menu) ).
So looks like if the device not ASR or PC (yes I know it is may be not correct, but from my point of view this is the situation) the Observium (8039) not recognize the fanspeed sensors as fanspeed sensor.
Laszlo
From: observium observium-bounces@observium.org on behalf of Laszlo Nemeth laszlo.nemeth@emarsys.com Reply-To: Observium Network Observation System observium@observium.org Date: 2016. November 2., Wednesday 9:33 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] CheckPoint alert creation problem
Ez a feladó nem felelt meg a csalást ellenőrző vizsgálatunkon, és lehet, hogy nem az, akinek tűnik. Információ az identitáshamisításrólhttp://aka.ms/LearnAboutSpoofing
Visszajelzéshttp://aka.ms/SafetyTipsFeedback
Hi
Yes, I set it to Sensor type. But it looks like the check not match with any device. I have more than 50 check, this is the only that not match with any device’s sensor.
Laszlo
From: observium observium-bounces@observium.org on behalf of "Moerman, Maarten" mmoerman@ebay.com Reply-To: Observium Network Observation System observium@observium.org Date: 2016. October 28., Friday 16:23 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] CheckPoint alert creation problem
Have you selected the right entity type when adding an alert-checker? It needs to be of type “sensor” , it doesn’t work when you leave it on “device”
Maarten
From: observium observium-bounces@observium.org on behalf of Laszlo Nemeth laszlo.nemeth@emarsys.com Reply-To: Observium Network Observation System observium@observium.org Date: Friday, October 28, 2016 at 3:37 PM To: Observium Network Observation System observium@observium.org Subject: [Observium] CheckPoint alert creation problem
Hello,
I have a CheckPoint 2205 device. It is supported by Observium, so we love it :D
I would like to create an alert for it’s fan speed.
I do a normal alert like our other looks like:
Device: hostname match *cpfw01* Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000
With this settings if i push a Rebuild, it shows 0 entities.
How can i check what is wrong? I tried to change the fanspeed to temperature, but the problem is similar, 0 entities after rebuild.
I attached a picture about the graphs of the device.
Hmm... if i run a „rebuild” there are see lot of devices but there is no any „FW” devices however we have more whit this FW prefix. May be this is the problem? It looks like this list doesn’t show all of our devices.
Thanks
Br Laszlo
I am not able to give access to the checkpoint… but I can run commands if it needed. But do you think this is a checkpoint problem not Observium?
BR Laszlo
From: observium observium-bounces@observium.org on behalf of "Moerman, Maarten" mmoerman@ebay.com Reply-To: Observium Network Observation System observium@observium.org Date: 2016. November 2., Wednesday 13:47 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] CheckPoint alert creation problem
You should give some developer access to a checkpoint to verify if this is the case then.
Maarten
From: observium observium-bounces@observium.org on behalf of Laszlo Nemeth laszlo.nemeth@emarsys.com Reply-To: Observium Network Observation System observium@observium.org Date: Wednesday, November 2, 2016 at 11:17 AM To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] CheckPoint alert creation problem
I made a little debug.
So the alert:
Device: hostname match *fw* Entity type: Sensor Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000
Result: no any device match
If I replace the hostname with “hostname match * “ it match with 4 device’s 38 “fanspeed” sensor. But this devices are Cisco routers (ASR) and PC Linux servers. No any firewall that have fanspeed sensor (more than 10 devices there I see the Fanspeed RRD graphs under these devices HEALTH menu) ).
So looks like if the device not ASR or PC (yes I know it is may be not correct, but from my point of view this is the situation) the Observium (8039) not recognize the fanspeed sensors as fanspeed sensor.
Laszlo
From: observium observium-bounces@observium.org on behalf of Laszlo Nemeth laszlo.nemeth@emarsys.com Reply-To: Observium Network Observation System observium@observium.org Date: 2016. November 2., Wednesday 9:33 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] CheckPoint alert creation problem
Ez a feladó nem felelt meg a csalást ellenőrző vizsgálatunkon, és lehet, hogy nem az, akinek tűnik. Információ az identitáshamisításrólhttp://aka.ms/LearnAboutSpoofing
Visszajelzéshttp://aka.ms/SafetyTipsFeedback
Hi
Yes, I set it to Sensor type. But it looks like the check not match with any device. I have more than 50 check, this is the only that not match with any device’s sensor.
Laszlo
From: observium observium-bounces@observium.org on behalf of "Moerman, Maarten" mmoerman@ebay.com Reply-To: Observium Network Observation System observium@observium.org Date: 2016. October 28., Friday 16:23 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] CheckPoint alert creation problem
Have you selected the right entity type when adding an alert-checker? It needs to be of type “sensor” , it doesn’t work when you leave it on “device”
Maarten
From: observium observium-bounces@observium.org on behalf of Laszlo Nemeth laszlo.nemeth@emarsys.com Reply-To: Observium Network Observation System observium@observium.org Date: Friday, October 28, 2016 at 3:37 PM To: Observium Network Observation System observium@observium.org Subject: [Observium] CheckPoint alert creation problem
Hello,
I have a CheckPoint 2205 device. It is supported by Observium, so we love it :D
I would like to create an alert for it’s fan speed.
I do a normal alert like our other looks like:
Device: hostname match *cpfw01* Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000
With this settings if i push a Rebuild, it shows 0 entities.
How can i check what is wrong? I tried to change the fanspeed to temperature, but the problem is similar, 0 entities after rebuild.
I attached a picture about the graphs of the device.
Hmm... if i run a „rebuild” there are see lot of devices but there is no any „FW” devices however we have more whit this FW prefix. May be this is the problem? It looks like this list doesn’t show all of our devices.
Thanks
Br Laszlo
Hi,
What is the process to integrate the MIBs manufacturer Huawei in Observium?
Thank you for your help
Regards
Jean Caruso
De : observium [mailto:observium-bounces@observium.org] De la part de Moerman, Maarten Envoyé : mercredi 2 novembre 2016 13:48 À : Observium Network Observation System observium@observium.org Objet : Re: [Observium] CheckPoint alert creation problem
You should give some developer access to a checkpoint to verify if this is the case then.
Maarten
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of Laszlo Nemeth <laszlo.nemeth@emarsys.commailto:laszlo.nemeth@emarsys.com> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: Wednesday, November 2, 2016 at 11:17 AM To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] CheckPoint alert creation problem
I made a little debug.
So the alert:
Device: hostname match *fw* Entity type: Sensor Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000
Result: no any device match
If I replace the hostname with “hostname match * “ it match with 4 device’s 38 “fanspeed” sensor. But this devices are Cisco routers (ASR) and PC Linux servers. No any firewall that have fanspeed sensor (more than 10 devices there I see the Fanspeed RRD graphs under these devices HEALTH menu) ).
So looks like if the device not ASR or PC (yes I know it is may be not correct, but from my point of view this is the situation) the Observium (8039) not recognize the fanspeed sensors as fanspeed sensor.
Laszlo
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of Laszlo Nemeth <laszlo.nemeth@emarsys.commailto:laszlo.nemeth@emarsys.com> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: 2016. November 2., Wednesday 9:33 To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] CheckPoint alert creation problem
Ez a feladó nem felelt meg a csalást ellenőrző vizsgálatunkon, és lehet, hogy nem az, akinek tűnik. Információ az identitáshamisításrólhttp://aka.ms/LearnAboutSpoofing
Visszajelzéshttp://aka.ms/SafetyTipsFeedback
Hi
Yes, I set it to Sensor type. But it looks like the check not match with any device. I have more than 50 check, this is the only that not match with any device’s sensor.
Laszlo
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of "Moerman, Maarten" <mmoerman@ebay.commailto:mmoerman@ebay.com> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: 2016. October 28., Friday 16:23 To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] CheckPoint alert creation problem
Have you selected the right entity type when adding an alert-checker? It needs to be of type “sensor” , it doesn’t work when you leave it on “device”
Maarten
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of Laszlo Nemeth <laszlo.nemeth@emarsys.commailto:laszlo.nemeth@emarsys.com> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: Friday, October 28, 2016 at 3:37 PM To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: [Observium] CheckPoint alert creation problem
Hello,
I have a CheckPoint 2205 device. It is supported by Observium, so we love it :D
I would like to create an alert for it’s fan speed.
I do a normal alert like our other looks like:
Device: hostname match *cpfw01* Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000
With this settings if i push a Rebuild, it shows 0 entities.
How can i check what is wrong? I tried to change the fanspeed to temperature, but the problem is similar, 0 entities after rebuild.
I attached a picture about the graphs of the device.
Hmm... if i run a „rebuild” there are see lot of devices but there is no any „FW” devices however we have more whit this FW prefix. May be this is the problem? It looks like this list doesn’t show all of our devices.
Thanks
Br Laszlo
Ce message peut contenir des informations confidentielles, couvertes par le secret professionnel ou réservées exclusivement à leur destinataire. Toute lecture, utilisation, diffusion ou divulgation sans autorisation expresse est rigoureusement interdite. Si vous n'en êtes pas le destinataire, merci de prendre contact avec l'expéditeur et de détruire ce message. This email may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
Ce message peut contenir des informations confidentielles, couvertes par le secret professionnel ou réservées exclusivement à leur destinataire. Toute lecture, utilisation, diffusion ou divulgation sans autorisation expresse est rigoureusement interdite. Si vous n'en êtes pas le destinataire, merci de prendre contact avec l'expéditeur et de détruire ce message. This email may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
Dear Jean,
How is this related to the Checkpoint alert creation problem?
More no topic, a lot of information is missing to correctly diagnose the issue, but in any case, the alerting matching is very generic and definitely should not be buggy for only a checkpoint fanspeed sensor...
Tom
On 11/07/2016 02:37 PM, Jean CARUSO wrote:
Hi,
What is the process to integrate the MIBs manufacturer Huawei in Observium?
Thank you for your help
Regards
Jean Caruso
*De :*observium [mailto:observium-bounces@observium.org] *De la part de* Moerman, Maarten *Envoyé :* mercredi 2 novembre 2016 13:48 *À :* Observium Network Observation System observium@observium.org *Objet :* Re: [Observium] CheckPoint alert creation problem
You should give some developer access to a checkpoint to verify if this is the case then.
Maarten
*From: *observium <observium-bounces@observium.org mailto:observium-bounces@observium.org> on behalf of Laszlo Nemeth <laszlo.nemeth@emarsys.com mailto:laszlo.nemeth@emarsys.com> *Reply-To: *Observium Network Observation System <observium@observium.org mailto:observium@observium.org> *Date: *Wednesday, November 2, 2016 at 11:17 AM *To: *Observium Network Observation System <observium@observium.org mailto:observium@observium.org> *Subject: *Re: [Observium] CheckPoint alert creation problem
I made a little debug.
So the alert:
Device: hostname match *fw*
Entity type: Sensor
Entity match: sensor_class equals fanspeed
Test condition: sensor_value greater 3000
Result: no any device match
If I replace the hostname with “hostname match * “ it match with 4 device’s 38 “fanspeed” sensor. But this devices are Cisco routers (ASR) and PC Linux servers. No any firewall that have fanspeed sensor (more than 10 devices there I see the Fanspeed RRD graphs under these devices HEALTH menu) ).
So looks like if the device not ASR or PC (yes I know it is may be not correct, but from my point of view this is the situation) the Observium (8039) not recognize the fanspeed sensors as fanspeed sensor.
Laszlo
*From: *observium <observium-bounces@observium.org mailto:observium-bounces@observium.org> on behalf of Laszlo Nemeth <laszlo.nemeth@emarsys.com mailto:laszlo.nemeth@emarsys.com> *Reply-To: *Observium Network Observation System <observium@observium.org mailto:observium@observium.org> *Date: *2016. November 2., Wednesday 9:33 *To: *Observium Network Observation System <observium@observium.org mailto:observium@observium.org> *Subject: *Re: [Observium] CheckPoint alert creation problem
Ez a feladó nem felelt meg a csalást ellenőrző vizsgálatunkon, és lehet, hogy nem az, akinek tűnik. Információ az identitáshamisításról http://aka.ms/LearnAboutSpoofing
Visszajelzés http://aka.ms/SafetyTipsFeedback
Hi
Yes, I set it to Sensor type. But it looks like the check not match with any device. I have more than 50 check, this is the only that not match with any device’s sensor.
Laszlo
*From: *observium <observium-bounces@observium.org mailto:observium-bounces@observium.org> on behalf of "Moerman, Maarten" <mmoerman@ebay.com mailto:mmoerman@ebay.com> *Reply-To: *Observium Network Observation System <observium@observium.org mailto:observium@observium.org> *Date: *2016. October 28., Friday 16:23 *To: *Observium Network Observation System <observium@observium.org mailto:observium@observium.org> *Subject: *Re: [Observium] CheckPoint alert creation problem
Have you selected the right entity type when adding an alert-checker? It needs to be of type “sensor” , it doesn’t work when you leave it on “device”
Maarten
*From: *observium <observium-bounces@observium.org mailto:observium-bounces@observium.org> on behalf of Laszlo Nemeth <laszlo.nemeth@emarsys.com mailto:laszlo.nemeth@emarsys.com> *Reply-To: *Observium Network Observation System <observium@observium.org mailto:observium@observium.org> *Date: *Friday, October 28, 2016 at 3:37 PM *To: *Observium Network Observation System <observium@observium.org mailto:observium@observium.org> *Subject: *[Observium] CheckPoint alert creation problem
Hello,
I have a CheckPoint 2205 device. It is supported by Observium, so we love it :D
I would like to create an alert for it’s fan speed.
I do a normal alert like our other looks like:
Device: hostname match *cpfw01*
Entity match: sensor_class equals fanspeed
Test condition: sensor_value greater 3000
With this settings if i push a Rebuild, it shows 0 entities.
How can i check what is wrong? I tried to change the fanspeed to temperature, but the problem is similar, 0 entities after rebuild.
I attached a picture about the graphs of the device.
Hmm... if i run a „rebuild” there are see lot of devices but there is no any „FW” devices however we have more whit this FW prefix. May be this is the problem? It looks like this list doesn’t show all of our devices.
Thanks
Br
Laszlo
Ce message peut contenir des informations confidentielles, couvertes par le secret professionnel ou réservées exclusivement à leur destinataire. Toute lecture, utilisation, diffusion ou divulgation sans autorisation expresse est rigoureusement interdite. Si vous n'en êtes pas le destinataire, merci de prendre contact avec l'expéditeur et de détruire ce message. This email may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
Ce message peut contenir des informations confidentielles, couvertes par le secret professionnel ou réservées exclusivement à leur destinataire. Toute lecture, utilisation, diffusion ou divulgation sans autorisation expresse est rigoureusement interdite. Si vous n'en êtes pas le destinataire, merci de prendre contact avec l'expéditeur et de détruire ce message. This email may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
sorry, I forgot to change the title of the message
regards
[Description : E:\ADMINISTRATIF\Exemple Formulaire\ADMENTIS\ADMENTIS LOGO (1)\LOGO DOCUMENTS INTERNE\LOGO RVB ADM V1.jpg]
Jean CARUSO Consultant Tél. : +334 42 24 37 97 Fax : +334 42 90 58 40 Gsm : +336 71 38 17 50 @ : jcaruso@admentis.frmailto:jcaruso@admentis.fr
P Imprimez seulement si nécessaire – Print only if necessary
De : observium [mailto:observium-bounces@observium.org] De la part de Tom Laermans Envoyé : lundi 7 novembre 2016 14:47 À : Observium Network Observation System observium@observium.org Objet : Re: [Observium] CheckPoint alert creation problem
Dear Jean,
How is this related to the Checkpoint alert creation problem?
More no topic, a lot of information is missing to correctly diagnose the issue, but in any case, the alerting matching is very generic and definitely should not be buggy for only a checkpoint fanspeed sensor...
Tom On 11/07/2016 02:37 PM, Jean CARUSO wrote: Hi,
What is the process to integrate the MIBs manufacturer Huawei in Observium?
Thank you for your help
Regards
Jean Caruso
De : observium [mailto:observium-bounces@observium.org] De la part de Moerman, Maarten Envoyé : mercredi 2 novembre 2016 13:48 À : Observium Network Observation System observium@observium.orgmailto:observium@observium.org Objet : Re: [Observium] CheckPoint alert creation problem
You should give some developer access to a checkpoint to verify if this is the case then.
Maarten
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of Laszlo Nemeth <laszlo.nemeth@emarsys.commailto:laszlo.nemeth@emarsys.com> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: Wednesday, November 2, 2016 at 11:17 AM To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] CheckPoint alert creation problem
I made a little debug.
So the alert:
Device: hostname match *fw* Entity type: Sensor Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000
Result: no any device match
If I replace the hostname with “hostname match * “ it match with 4 device’s 38 “fanspeed” sensor. But this devices are Cisco routers (ASR) and PC Linux servers. No any firewall that have fanspeed sensor (more than 10 devices there I see the Fanspeed RRD graphs under these devices HEALTH menu) ).
So looks like if the device not ASR or PC (yes I know it is may be not correct, but from my point of view this is the situation) the Observium (8039) not recognize the fanspeed sensors as fanspeed sensor.
Laszlo
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of Laszlo Nemeth <laszlo.nemeth@emarsys.commailto:laszlo.nemeth@emarsys.com> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: 2016. November 2., Wednesday 9:33 To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] CheckPoint alert creation problem
Ez a feladó nem felelt meg a csalást ellenőrző vizsgálatunkon, és lehet, hogy nem az, akinek tűnik. Információ az identitáshamisításrólhttp://aka.ms/LearnAboutSpoofing
Visszajelzéshttp://aka.ms/SafetyTipsFeedback
Hi
Yes, I set it to Sensor type. But it looks like the check not match with any device. I have more than 50 check, this is the only that not match with any device’s sensor.
Laszlo
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of "Moerman, Maarten" <mmoerman@ebay.commailto:mmoerman@ebay.com> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: 2016. October 28., Friday 16:23 To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] CheckPoint alert creation problem
Have you selected the right entity type when adding an alert-checker? It needs to be of type “sensor” , it doesn’t work when you leave it on “device”
Maarten
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of Laszlo Nemeth <laszlo.nemeth@emarsys.commailto:laszlo.nemeth@emarsys.com> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: Friday, October 28, 2016 at 3:37 PM To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: [Observium] CheckPoint alert creation problem
Hello,
I have a CheckPoint 2205 device. It is supported by Observium, so we love it :D
I would like to create an alert for it’s fan speed.
I do a normal alert like our other looks like:
Device: hostname match *cpfw01* Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000
With this settings if i push a Rebuild, it shows 0 entities.
How can i check what is wrong? I tried to change the fanspeed to temperature, but the problem is similar, 0 entities after rebuild.
I attached a picture about the graphs of the device.
Hmm... if i run a „rebuild” there are see lot of devices but there is no any „FW” devices however we have more whit this FW prefix. May be this is the problem? It looks like this list doesn’t show all of our devices.
Thanks
Br Laszlo
Ce message peut contenir des informations confidentielles, couvertes par le secret professionnel ou réservées exclusivement à leur destinataire. Toute lecture, utilisation, diffusion ou divulgation sans autorisation expresse est rigoureusement interdite. Si vous n'en êtes pas le destinataire, merci de prendre contact avec l'expéditeur et de détruire ce message. This email may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
Ce message peut contenir des informations confidentielles, couvertes par le secret professionnel ou réservées exclusivement à leur destinataire. Toute lecture, utilisation, diffusion ou divulgation sans autorisation expresse est rigoureusement interdite. Si vous n'en êtes pas le destinataire, merci de prendre contact avec l'expéditeur et de détruire ce message. This email may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Ce message peut contenir des informations confidentielles, couvertes par le secret professionnel ou réservées exclusivement à leur destinataire. Toute lecture, utilisation, diffusion ou divulgation sans autorisation expresse est rigoureusement interdite. Si vous n'en êtes pas le destinataire, merci de prendre contact avec l'expéditeur et de détruire ce message. This email may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
Ce message peut contenir des informations confidentielles, couvertes par le secret professionnel ou réservées exclusivement à leur destinataire. Toute lecture, utilisation, diffusion ou divulgation sans autorisation expresse est rigoureusement interdite. Si vous n'en êtes pas le destinataire, merci de prendre contact avec l'expéditeur et de détruire ce message. This email may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
No, that does not suffice. Please create a new e-mail and do NOT reply to an existing mail.
On 11/07/2016 02:51 PM, Jean CARUSO wrote:
sorry, I forgot to change the title of the message
regards
Description : E:\ADMINISTRATIF\Exemple Formulaire\ADMENTIS\ADMENTIS LOGO (1)\LOGO DOCUMENTS INTERNE\LOGO RVB ADM V1.jpg
*Jean CARUSO* *Consultant* Tél. : +334 42 24 37 97 Fax : +334 42 90 58 40 Gsm : +336 71 38 17 50 @ : jcaruso@admentis.fr mailto:jcaruso@admentis.fr
PImprimez seulement si nécessaire – Print only if necessary**
*De :*observium [mailto:observium-bounces@observium.org] *De la part de* Tom Laermans *Envoyé :* lundi 7 novembre 2016 14:47 *À :* Observium Network Observation System observium@observium.org *Objet :* Re: [Observium] CheckPoint alert creation problem
Dear Jean,
How is this related to the Checkpoint alert creation problem?
More no topic, a lot of information is missing to correctly diagnose the issue, but in any case, the alerting matching is very generic and definitely should not be buggy for only a checkpoint fanspeed sensor...
Tom
On 11/07/2016 02:37 PM, Jean CARUSO wrote:
Hi, What is the process to integrate the MIBs manufacturer Huawei in Observium? Thank you for your help Regards Jean Caruso *De :*observium [mailto:observium-bounces@observium.org] *De la part de* Moerman, Maarten *Envoyé :* mercredi 2 novembre 2016 13:48 *À :* Observium Network Observation System <observium@observium.org> <mailto:observium@observium.org> *Objet :* Re: [Observium] CheckPoint alert creation problem You should give some developer access to a checkpoint to verify if this is the case then. Maarten *From: *observium <observium-bounces@observium.org <mailto:observium-bounces@observium.org>> on behalf of Laszlo Nemeth <laszlo.nemeth@emarsys.com <mailto:laszlo.nemeth@emarsys.com>> *Reply-To: *Observium Network Observation System <observium@observium.org <mailto:observium@observium.org>> *Date: *Wednesday, November 2, 2016 at 11:17 AM *To: *Observium Network Observation System <observium@observium.org <mailto:observium@observium.org>> *Subject: *Re: [Observium] CheckPoint alert creation problem I made a little debug. So the alert: Device: hostname match *fw* Entity type: Sensor Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000 Result: no any device match If I replace the hostname with “hostname match * “ it match with 4 device’s 38 “fanspeed” sensor. But this devices are Cisco routers (ASR) and PC Linux servers. No any firewall that have fanspeed sensor (more than 10 devices there I see the Fanspeed RRD graphs under these devices HEALTH menu) ). So looks like if the device not ASR or PC (yes I know it is may be not correct, but from my point of view this is the situation) the Observium (8039) not recognize the fanspeed sensors as fanspeed sensor. Laszlo *From: *observium <observium-bounces@observium.org <mailto:observium-bounces@observium.org>> on behalf of Laszlo Nemeth <laszlo.nemeth@emarsys.com <mailto:laszlo.nemeth@emarsys.com>> *Reply-To: *Observium Network Observation System <observium@observium.org <mailto:observium@observium.org>> *Date: *2016. November 2., Wednesday 9:33 *To: *Observium Network Observation System <observium@observium.org <mailto:observium@observium.org>> *Subject: *Re: [Observium] CheckPoint alert creation problem Ez a feladó nem felelt meg a csalást ellenőrző vizsgálatunkon, és lehet, hogy nem az, akinek tűnik. Információ az identitáshamisításról <http://aka.ms/LearnAboutSpoofing> Visszajelzés <http://aka.ms/SafetyTipsFeedback> Hi Yes, I set it to Sensor type. But it looks like the check not match with any device. I have more than 50 check, this is the only that not match with any device’s sensor. Laszlo *From: *observium <observium-bounces@observium.org <mailto:observium-bounces@observium.org>> on behalf of "Moerman, Maarten" <mmoerman@ebay.com <mailto:mmoerman@ebay.com>> *Reply-To: *Observium Network Observation System <observium@observium.org <mailto:observium@observium.org>> *Date: *2016. October 28., Friday 16:23 *To: *Observium Network Observation System <observium@observium.org <mailto:observium@observium.org>> *Subject: *Re: [Observium] CheckPoint alert creation problem Have you selected the right entity type when adding an alert-checker? It needs to be of type “sensor” , it doesn’t work when you leave it on “device” Maarten *From: *observium <observium-bounces@observium.org <mailto:observium-bounces@observium.org>> on behalf of Laszlo Nemeth <laszlo.nemeth@emarsys.com <mailto:laszlo.nemeth@emarsys.com>> *Reply-To: *Observium Network Observation System <observium@observium.org <mailto:observium@observium.org>> *Date: *Friday, October 28, 2016 at 3:37 PM *To: *Observium Network Observation System <observium@observium.org <mailto:observium@observium.org>> *Subject: *[Observium] CheckPoint alert creation problem Hello, I have a CheckPoint 2205 device. It is supported by Observium, so we love it :D I would like to create an alert for it’s fan speed. I do a normal alert like our other looks like: Device: hostname match *cpfw01* Entity match: sensor_class equals fanspeed Test condition: sensor_value greater 3000 With this settings if i push a Rebuild, it shows 0 entities. How can i check what is wrong? I tried to change the fanspeed to temperature, but the problem is similar, 0 entities after rebuild. I attached a picture about the graphs of the device. Hmm... if i run a „rebuild” there are see lot of devices but there is no any „FW” devices however we have more whit this FW prefix. May be this is the problem? It looks like this list doesn’t show all of our devices. Thanks Br Laszlo Ce message peut contenir des informations confidentielles, couvertes par le secret professionnel ou réservées exclusivement à leur destinataire. Toute lecture, utilisation, diffusion ou divulgation sans autorisation expresse est rigoureusement interdite. Si vous n'en êtes pas le destinataire, merci de prendre contact avec l'expéditeur et de détruire ce message. This email may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. Ce message peut contenir des informations confidentielles, couvertes par le secret professionnel ou réservées exclusivement à leur destinataire. Toute lecture, utilisation, diffusion ou divulgation sans autorisation expresse est rigoureusement interdite. Si vous n'en êtes pas le destinataire, merci de prendre contact avec l'expéditeur et de détruire ce message. This email may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observiumCe message peut contenir des informations confidentielles, couvertes par le secret professionnel ou réservées exclusivement à leur destinataire. Toute lecture, utilisation, diffusion ou divulgation sans autorisation expresse est rigoureusement interdite. Si vous n'en êtes pas le destinataire, merci de prendre contact avec l'expéditeur et de détruire ce message. This email may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
Ce message peut contenir des informations confidentielles, couvertes par le secret professionnel ou réservées exclusivement à leur destinataire. Toute lecture, utilisation, diffusion ou divulgation sans autorisation expresse est rigoureusement interdite. Si vous n'en êtes pas le destinataire, merci de prendre contact avec l'expéditeur et de détruire ce message. This email may contain material that is confidential, privileged and/or attorney work product for the sole use of the intended recipient. Any review, reliance or distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (4)
-
Jean CARUSO -
Laszlo Nemeth -
Moerman, Maarten -
Tom Laermans