Any thoughts on this issue? Is this a known issue?
Observium 0.14.7.5736 (stable)
TRAVIS KREIKEMEIER
From: Travis Kreikemeier Sent: Sunday, August 10, 2014 1:27 PM To: 'observium@observium.org' Subject: No port names in traffic accounting
When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area.
[cid:image001.jpg@01CFB87C.115A9BC0]
Some of the ports on the device:
[cid:image002.jpg@01CFB87C.115A9BC0]
TRAVIS KREIKEMEIER
Can you svn up? I remember seeing some Calix changes since 5736.
Regards,
SG
On 8/15/2014 10:28 AM, Travis Kreikemeier wrote:
Any thoughts on this issue? Is this a known issue?
Observium 0.14.7.5736 (stable)
*TRAVIS KREIKEMEIER*
*From:* Travis Kreikemeier *Sent:* Sunday, August 10, 2014 1:27 PM *To:* 'observium@observium.org' *Subject:* No port names in traffic accounting
When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking “Create Bill”. Would like to add the ports in the traffic accounting area.
Some of the ports on the device:
*TRAVIS KREIKEMEIER*
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Done, on 0.14.8.5757 (Stable) now, same issue.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Spencer Gaw Sent: Friday, August 15, 2014 11:34 AM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Can you svn up? I remember seeing some Calix changes since 5736.
Regards,
SG
On 8/15/2014 10:28 AM, Travis Kreikemeier wrote:
Any thoughts on this issue? Is this a known issue?
Observium 0.14.7.5736 (stable)
*TRAVIS KREIKEMEIER*
*From:* Travis Kreikemeier *Sent:* Sunday, August 10, 2014 1:27 PM *To:* 'observium@observium.org' *Subject:* No port names in traffic accounting
When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area.
Some of the ports on the device:
*TRAVIS KREIKEMEIER*
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I see what the issue is now. The Interface drop down in traffic accounting is populated by "ifDescr - ifAlias". The Calix E7 is not handing out ifAlias and the ifDescr are all blank. Hence why I am see " - " in the drop down. It might be worthwhile to add code that if "ifDescr" is blank or missing to use ifName, as that is populated by Calix. This might solve some other issues with that drop down being blank for other vendors.
On another note, plus 1 vote for an snmpwalk troubleshooting GUI in Observium.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Travis Kreikemeier Sent: Tuesday, August 19, 2014 2:20 PM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Done, on 0.14.8.5757 (Stable) now, same issue.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Spencer Gaw Sent: Friday, August 15, 2014 11:34 AM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Can you svn up? I remember seeing some Calix changes since 5736.
Regards,
SG
On 8/15/2014 10:28 AM, Travis Kreikemeier wrote:
Any thoughts on this issue? Is this a known issue?
Observium 0.14.7.5736 (stable)
*TRAVIS KREIKEMEIER*
*From:* Travis Kreikemeier *Sent:* Sunday, August 10, 2014 1:27 PM *To:* 'observium@observium.org' *Subject:* No port names in traffic accounting
When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area.
Some of the ports on the device:
*TRAVIS KREIKEMEIER*
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
That's .. one vote total?
What's an snmpwalk troubleshooting gui?
On 19/08/2014 23:14, Travis Kreikemeier wrote:
I see what the issue is now. The Interface drop down in traffic accounting is populated by "ifDescr - ifAlias". The Calix E7 is not handing out ifAlias and the ifDescr are all blank. Hence why I am see " - " in the drop down. It might be worthwhile to add code that if "ifDescr" is blank or missing to use ifName, as that is populated by Calix. This might solve some other issues with that drop down being blank for other vendors.
On another note, plus 1 vote for an snmpwalk troubleshooting GUI in Observium.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Travis Kreikemeier Sent: Tuesday, August 19, 2014 2:20 PM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Done, on 0.14.8.5757 (Stable) now, same issue.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Spencer Gaw Sent: Friday, August 15, 2014 11:34 AM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Can you svn up? I remember seeing some Calix changes since 5736.
Regards,
SG
On 8/15/2014 10:28 AM, Travis Kreikemeier wrote:
Any thoughts on this issue? Is this a known issue?
Observium 0.14.7.5736 (stable)
*TRAVIS KREIKEMEIER*
*From:* Travis Kreikemeier *Sent:* Sunday, August 10, 2014 1:27 PM *To:* 'observium@observium.org' *Subject:* No port names in traffic accounting
When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area.
Some of the ports on the device:
*TRAVIS KREIKEMEIER*
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Just thinking out loud. A page in Observium that you could select a device and then from other dropdowns and checkboxes select different snmpwalk options. Press Ok and it gives you the raw output on the page. Help with troubleshooting and understanding what is being provided by a device via SNMP.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Tuesday, August 19, 2014 5:01 PM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
That's .. one vote total?
What's an snmpwalk troubleshooting gui?
On 19/08/2014 23:14, Travis Kreikemeier wrote:
I see what the issue is now. The Interface drop down in traffic accounting is populated by "ifDescr - ifAlias". The Calix E7 is not handing out ifAlias and the ifDescr are all blank. Hence why I am see " - " in the drop down. It might be worthwhile to add code that if "ifDescr" is blank or missing to use ifName, as that is populated by Calix. This might solve some other issues with that drop down being blank for other vendors.
On another note, plus 1 vote for an snmpwalk troubleshooting GUI in Observium.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Travis Kreikemeier Sent: Tuesday, August 19, 2014 2:20 PM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Done, on 0.14.8.5757 (Stable) now, same issue.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Spencer Gaw Sent: Friday, August 15, 2014 11:34 AM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Can you svn up? I remember seeing some Calix changes since 5736.
Regards,
SG
On 8/15/2014 10:28 AM, Travis Kreikemeier wrote:
Any thoughts on this issue? Is this a known issue?
Observium 0.14.7.5736 (stable)
*TRAVIS KREIKEMEIER*
*From:* Travis Kreikemeier *Sent:* Sunday, August 10, 2014 1:27 PM *To:* 'observium@observium.org' *Subject:* No port names in traffic accounting
When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area.
Some of the ports on the device:
*TRAVIS KREIKEMEIER*
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
+1 for suggestion
Simon
On 19 Aug 2014, at 23:28, Travis Kreikemeier travis@travko.com wrote:
Just thinking out loud. A page in Observium that you could select a device and then from other dropdowns and checkboxes select different snmpwalk options. Press Ok and it gives you the raw output on the page. Help with troubleshooting and understanding what is being provided by a device via SNMP.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Tuesday, August 19, 2014 5:01 PM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
That's .. one vote total?
What's an snmpwalk troubleshooting gui?
On 19/08/2014 23:14, Travis Kreikemeier wrote:
I see what the issue is now. The Interface drop down in traffic accounting is populated by "ifDescr - ifAlias". The Calix E7 is not handing out ifAlias and the ifDescr are all blank. Hence why I am see " - " in the drop down. It might be worthwhile to add code that if "ifDescr" is blank or missing to use ifName, as that is populated by Calix. This might solve some other issues with that drop down being blank for other vendors.
On another note, plus 1 vote for an snmpwalk troubleshooting GUI in Observium.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Travis Kreikemeier Sent: Tuesday, August 19, 2014 2:20 PM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Done, on 0.14.8.5757 (Stable) now, same issue.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Spencer Gaw Sent: Friday, August 15, 2014 11:34 AM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Can you svn up? I remember seeing some Calix changes since 5736.
Regards,
SG
On 8/15/2014 10:28 AM, Travis Kreikemeier wrote:
Any thoughts on this issue? Is this a known issue?
Observium 0.14.7.5736 (stable)
*TRAVIS KREIKEMEIER*
*From:* Travis Kreikemeier *Sent:* Sunday, August 10, 2014 1:27 PM *To:* 'observium@observium.org' *Subject:* No port names in traffic accounting
When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area.
Some of the ports on the device:
*TRAVIS KREIKEMEIER*
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
You already have that, it's called a Unix shell...
On 20/08/2014 00:28, Travis Kreikemeier wrote:
Just thinking out loud. A page in Observium that you could select a device and then from other dropdowns and checkboxes select different snmpwalk options. Press Ok and it gives you the raw output on the page. Help with troubleshooting and understanding what is being provided by a device via SNMP.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Tuesday, August 19, 2014 5:01 PM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
That's .. one vote total?
What's an snmpwalk troubleshooting gui?
On 19/08/2014 23:14, Travis Kreikemeier wrote:
I see what the issue is now. The Interface drop down in traffic accounting is populated by "ifDescr - ifAlias". The Calix E7 is not handing out ifAlias and the ifDescr are all blank. Hence why I am see " - " in the drop down. It might be worthwhile to add code that if "ifDescr" is blank or missing to use ifName, as that is populated by Calix. This might solve some other issues with that drop down being blank for other vendors.
On another note, plus 1 vote for an snmpwalk troubleshooting GUI in Observium.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Travis Kreikemeier Sent: Tuesday, August 19, 2014 2:20 PM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Done, on 0.14.8.5757 (Stable) now, same issue.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Spencer Gaw Sent: Friday, August 15, 2014 11:34 AM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Can you svn up? I remember seeing some Calix changes since 5736.
Regards,
SG
On 8/15/2014 10:28 AM, Travis Kreikemeier wrote:
Any thoughts on this issue? Is this a known issue?
Observium 0.14.7.5736 (stable)
*TRAVIS KREIKEMEIER*
*From:* Travis Kreikemeier *Sent:* Sunday, August 10, 2014 1:27 PM *To:* 'observium@observium.org' *Subject:* No port names in traffic accounting
When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area.
Some of the ports on the device:
*TRAVIS KREIKEMEIER*
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Guys, If you just want info about what SNMP stuff is being pulled from an interface/port Observium already has that in the GUI! Click into the device, Click Ports, Click on the name of the port you want to check out, and then click on "Data" (next to "Create Bill" on the right hand side above the Traffic graphs). Cheers, Nathan
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Wednesday, 20 August 2014 8:52 AM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
You already have that, it's called a Unix shell...
On 20/08/2014 00:28, Travis Kreikemeier wrote:
Just thinking out loud. A page in Observium that you could select a device and then from other dropdowns and checkboxes select different snmpwalk options. Press Ok and it gives you the raw output on the page. Help with troubleshooting and understanding what is being provided by a device via SNMP.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Tuesday, August 19, 2014 5:01 PM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
That's .. one vote total?
What's an snmpwalk troubleshooting gui?
On 19/08/2014 23:14, Travis Kreikemeier wrote:
I see what the issue is now. The Interface drop down in traffic accounting is populated by "ifDescr - ifAlias". The Calix E7 is not handing out ifAlias and the ifDescr are all blank. Hence why I am see " - " in the drop down. It might be worthwhile to add code that if "ifDescr" is blank or missing to use ifName, as that is populated by Calix. This might solve some other issues with that drop down being blank for other vendors.
On another note, plus 1 vote for an snmpwalk troubleshooting GUI in Observium.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Travis Kreikemeier Sent: Tuesday, August 19, 2014 2:20 PM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Done, on 0.14.8.5757 (Stable) now, same issue.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Spencer Gaw Sent: Friday, August 15, 2014 11:34 AM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Can you svn up? I remember seeing some Calix changes since 5736.
Regards,
SG
On 8/15/2014 10:28 AM, Travis Kreikemeier wrote:
Any thoughts on this issue? Is this a known issue?
Observium 0.14.7.5736 (stable)
*TRAVIS KREIKEMEIER*
*From:* Travis Kreikemeier *Sent:* Sunday, August 10, 2014 1:27 PM *To:* 'observium@observium.org' *Subject:* No port names in traffic accounting
When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area.
Some of the ports on the device:
*TRAVIS KREIKEMEIER*
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
That's good information, if only on a port-by-port basis. To elaborate on Tom's note, use `snmpwalk` from the shell: http://www.net-snmp.org/wiki/index.php/TUT:snmpwalk
You need to know a little about SNMP OIDs in order to obtain the information you're looking for via `snmpwalk`.
Having such a test page within the GUI is probably outside the scope of Observium. But like Adam always says, "feel free to write it!" ;-)
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Nathan Phelan Sent: Tuesday, August 19, 2014 4:12 PM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Hi Guys, If you just want info about what SNMP stuff is being pulled from an interface/port Observium already has that in the GUI! Click into the device, Click Ports, Click on the name of the port you want to check out, and then click on "Data" (next to "Create Bill" on the right hand side above the Traffic graphs). Cheers, Nathan
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Wednesday, 20 August 2014 8:52 AM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
You already have that, it's called a Unix shell...
On 20/08/2014 00:28, Travis Kreikemeier wrote:
Just thinking out loud. A page in Observium that you could select a device and then from other dropdowns and checkboxes select different snmpwalk options. Press Ok and it gives you the raw output on the page. Help with troubleshooting and understanding what is being provided by a device via SNMP.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Tuesday, August 19, 2014 5:01 PM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
That's .. one vote total?
What's an snmpwalk troubleshooting gui?
On 19/08/2014 23:14, Travis Kreikemeier wrote:
I see what the issue is now. The Interface drop down in traffic accounting is populated by "ifDescr - ifAlias". The Calix E7 is not handing out ifAlias and the ifDescr are all blank. Hence why I am see " - " in the drop down. It might be worthwhile to add code that if "ifDescr" is blank or missing to use ifName, as that is populated by Calix. This might solve some other issues with that drop down being blank for other vendors.
On another note, plus 1 vote for an snmpwalk troubleshooting GUI in Observium.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Travis Kreikemeier Sent: Tuesday, August 19, 2014 2:20 PM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Done, on 0.14.8.5757 (Stable) now, same issue.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Spencer Gaw Sent: Friday, August 15, 2014 11:34 AM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Can you svn up? I remember seeing some Calix changes since 5736.
Regards,
SG
On 8/15/2014 10:28 AM, Travis Kreikemeier wrote:
Any thoughts on this issue? Is this a known issue?
Observium 0.14.7.5736 (stable)
*TRAVIS KREIKEMEIER*
*From:* Travis Kreikemeier *Sent:* Sunday, August 10, 2014 1:27 PM *To:* 'observium@observium.org' *Subject:* No port names in traffic accounting
When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area.
Some of the ports on the device:
*TRAVIS KREIKEMEIER*
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Founded in 2007, IO is a worldwide leader in software defined data center technology, services and solutions that enable businesses and governments to intelligently control their information.
The communication contained in this e-mail is confidential and is intended only for the named recipient(s) and may contain information that is privileged, proprietary, attorney work product or exempt from disclosure under applicable law. If you have received this message in error, or are not the named recipient(s), please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. Please immediately notify the sender of the error, and delete this communication including any attached files from your system. Thank you for your cooperation.
On 2014-08-20 17:34, Pedersen, Sean wrote:
That's good information, if only on a port-by-port basis. To elaborate on Tom's note, use `snmpwalk` from the shell: http://www.net-snmp.org/wiki/index.php/TUT:snmpwalk
You need to know a little about SNMP OIDs in order to obtain the information you're looking for via `snmpwalk`.
Having such a test page within the GUI is probably outside the scope of Observium. But like Adam always says, "feel free to write it!" ;-)
My objection to SNMP-from-the-UI (and especially anything involving SNMP RW) is that it's a security nightmare, and at the end of the day, not *really* that useful.
adam.
The revision doesn't really mean the same thing on stable. Stable is only up to date to the point at which changes were merged from TRUNK to STABLE :
root@omega:/home/observium/demo# svn info Path: . Working Copy Root Path: /home/observium/demo URL: http://svn.observium.org/svn/observium/branches/stable Relative URL: ^/observium/branches/stable Repository Root: http://svn.observium.org/svn Repository UUID: 61d68cd4-352d-0410-923a-c4978735b2b8 Revision: 5757 Node Kind: directory Schedule: normal Last Changed Author: adama Last Changed Rev: 5745 Last Changed Date: 2014-08-13 11:58:16 +0200 (Wed, 13 Aug 2014)
In this case STABLE is at 5745 from the 13th. No changes since then have been merged to stable yet.
adam.
On 2014-08-19 20:18, Travis Kreikemeier wrote:
Done, on 0.14.8.5757 (Stable) now, same issue.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Spencer Gaw Sent: Friday, August 15, 2014 11:34 AM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Can you svn up? I remember seeing some Calix changes since 5736.
Regards,
SG
On 8/15/2014 10:28 AM, Travis Kreikemeier wrote:
Any thoughts on this issue? Is this a known issue?
Observium 0.14.7.5736 (stable)
*TRAVIS KREIKEMEIER*
*From:* Travis Kreikemeier *Sent:* Sunday, August 10, 2014 1:27 PM *To:* 'observium@observium.org' *Subject:* No port names in traffic accounting
When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area.
Some of the ports on the device:
*TRAVIS KREIKEMEIER*
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Calix is very retarded devices, they have many bugs in their fw..
they have made fixes to some latest firmwares for ifName/ifDescr, but thus broke interface counters (they now produce many spikes).. also Calix devices not have any ifAlias for ports.
Contact to vendor for fix this.
On Tue, Aug 19, 2014 at 11:18 PM, Travis Kreikemeier travis@travko.com wrote:
Done, on 0.14.8.5757 (Stable) now, same issue.
TRAVIS KREIKEMEIER
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Spencer Gaw Sent: Friday, August 15, 2014 11:34 AM To: Observium Network Observation System Subject: Re: [Observium] No port names in traffic accounting
Can you svn up? I remember seeing some Calix changes since 5736.
Regards,
SG
On 8/15/2014 10:28 AM, Travis Kreikemeier wrote:
Any thoughts on this issue? Is this a known issue?
Observium 0.14.7.5736 (stable)
*TRAVIS KREIKEMEIER*
*From:* Travis Kreikemeier *Sent:* Sunday, August 10, 2014 1:27 PM *To:* 'observium@observium.org' *Subject:* No port names in traffic accounting
When adding a Calix E7 port to a customer in traffic accounting. All of the interfaces in the drop down are blank, so hard to figure out which one to select. A work around I have been doing is going to the switch port and clicking "Create Bill". Would like to add the ports in the traffic accounting area.
Some of the ports on the device:
*TRAVIS KREIKEMEIER*
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (8)
-
Adam Armstrong -
Mike Stupalov -
Nathan Phelan -
Pedersen, Sean -
Simon Smith -
Spencer Gaw -
Tom Laermans -
Travis Kreikemeier