Hi,

please show/attach poller debug output for this device:

./poller.php -d -m ports -h <device>

On 05.07.16 11:16, Andre Geißler wrote:

Hi For some reason getting interface statistics stopped about 3 weeks ago for some devices. I'm updating observium every day so problem exists for several versions.

Affected are only 2 of around a dozen Cisco ASAs. I cannot see this problem on other device types.

Under device' MIB properties I can see request timeouts for " *ifInMulticastPkts.18 ifOutMulticastPkts.18 ifInBroadcastPkts.18 ifOutBroadcastPkts.18 ifHCInOctets.18 ifHCOutOctets.18 ifHCInUcastPkts.18 ifHCOutUcastPkts.18 ifHCInMulticastPkts.18 ifHCOutMulticastPkts.18 ifHCInBroadcastPkts.18 ifHCOutBroadcastPkts.18 ifInOctets.18 ifOutOctets.18 ifInUcastPkts.18 ifOutUcastPkts.18 ifInNUcastPkts.18 ifOutNUcastPkts.18 ifInDiscards.18 ifOutDiscards.18 ifInErrors.18 ifOutErrors.18 ifInUnknownProtos.18 ifMtu.18 ifSpeed.18 ifPhysAddress.18 ifAdminStatus.18 ifLastChange.18 ifPromiscuousMode.18 ifConnectorPresent.18"

All other values can be read without any problem.* When doing snmpget manually there is also no problem.

No difference when using snmp v2c or v3.

Any idea or advice?

Thanks, Andre **

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium