Dell/Force10 S60. Missing a few sensors/objects
Hi there
Let me start with apologise if I use the wrong terminology here, heard a few times on IRC that I need to read-up on MIB and OID's. =) My brain refuse to fulle understand it though, not sure why.
Have added a Force10 s60 switch to observium. Mostly it's fine but I do miss sensors for PSU and the Fans.
Here's a discovery.php -dd of the device: http://pastebin.com/D7FNqgVi
Here's an (attempt) of snmpwalking it. Still not sure I do this the right way... http://pastebin.com/DnkZtkvX
At around line 1788 and forward you can see the PSU and fan objects (line numbers in this paste is wrong).
1. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumFanTrays.1 = INTEGER: 2 2. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumFanTrays.2 = INTEGER: 0 3. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPowerSupplies.1 = INTEGER: 1 4. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPowerSupplies.2 = INTEGER: 0 5. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPluggableModules.1 = INTEGER: 2 6. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPluggableModules.2 = INTEGER: 0 7. F10-S-SERIES-CHASSIS-MIB::chStackUnitRowStatus.1 = INTEGER: active(1) 8. F10-S-SERIES-CHASSIS-MIB::chStackUnitRowStatus.2 = INTEGER: active(1) 9. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyIndex.1.1 = INTEGER: 1 10. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyIndex.1.2 = INTEGER: 2 11. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyOperStatus.1.1 = INTEGER: up(1) 12. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyOperStatus.1.2 = INTEGER: down(2) 13. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyType.1.1 = INTEGER: ac(1) 14. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyType.1.2 = INTEGER: 0 15. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayIndex.1.1 = INTEGER: 1 16. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayIndex.1.2 = INTEGER: 2 17. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayOperStatus.1.1 = INTEGER: up(1) 18. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayOperStatus.1.2 = INTEGER: up(1)
I looked at the documentation for something about expanding on existing device support. Couldn't find that and I assume it's not that easy? Have anyone added support for this in their observium installation or can point me in the direction on how to go about it (in a friendly way...).
Cheers and thanks
-- Henrik Cednert cto | compositor
Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ]
Hello Henrik, You use a very old version of Observium, r7848. If you upgrade to the latest version, r7915 it should work fine :) /Markus
2016-06-10 13:44 GMT+02:00 Henrik Cednert (Filmlance) < henrik.cednert@filmlance.se>:
Hi there
Let me start with apologise if I use the wrong terminology here, heard a few times on IRC that I need to read-up on MIB and OID's. =) My brain refuse to fulle understand it though, not sure why.
Have added a Force10 s60 switch to observium. Mostly it's fine but I do miss sensors for PSU and the Fans.
Here's a discovery.php -dd of the device: http://pastebin.com/D7FNqgVi
Here's an (attempt) of snmpwalking it. Still not sure I do this the right way... http://pastebin.com/DnkZtkvX
At around line 1788 and forward you can see the PSU and fan objects (line numbers in this paste is wrong).
- F10-S-SERIES-CHASSIS-MIB::chStackUnitNumFanTrays.1 = INTEGER: 2
- F10-S-SERIES-CHASSIS-MIB::chStackUnitNumFanTrays.2 = INTEGER: 0
- F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPowerSupplies.1 = INTEGER: 1
- F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPowerSupplies.2 = INTEGER: 0
- F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPluggableModules.1 = INTEGER: 2
- F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPluggableModules.2 = INTEGER: 0
- F10-S-SERIES-CHASSIS-MIB::chStackUnitRowStatus.1 = INTEGER: active(1)
- F10-S-SERIES-CHASSIS-MIB::chStackUnitRowStatus.2 = INTEGER: active(1)
- F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyIndex.1.1 = INTEGER: 1
- F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyIndex.1.2 = INTEGER: 2
- F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyOperStatus.1.1 = INTEGER:
up(1) 12. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyOperStatus.1.2 = INTEGER: down(2) 13. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyType.1.1 = INTEGER: ac(1) 14. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyType.1.2 = INTEGER: 0 15. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayIndex.1.1 = INTEGER: 1 16. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayIndex.1.2 = INTEGER: 2 17. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayOperStatus.1.1 = INTEGER: up(1) 18. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayOperStatus.1.2 = INTEGER: up(1)
I looked at the documentation for something about expanding on existing device support. Couldn't find that and I assume it's not that easy? Have anyone added support for this in their observium installation or can point me in the direction on how to go about it (in a friendly way...).
Cheers and thanks
-- Henrik Cednert cto | compositor
Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Ha! Look at that! Now they're there! Thanks. =) Feels like I just updated but guess the dev's are too fast for me. =)
Thanks a bunch.
-- Henrik Cednert cto | compositor
Filmlance International | www.filmlance.se mobile [ + 46 (0)704 71 89 54 ] skype [ cednert ]
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of Markus Klock <markus@best-practice.semailto:markus@best-practice.se> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: Friday 10 June 2016 at 14:02 To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] Dell/Force10 S60. Missing a few sensors/objects
Hello Henrik, You use a very old version of Observium, r7848. If you upgrade to the latest version, r7915 it should work fine :) /Markus
2016-06-10 13:44 GMT+02:00 Henrik Cednert (Filmlance) <henrik.cednert@filmlance.semailto:henrik.cednert@filmlance.se>: Hi there
Let me start with apologise if I use the wrong terminology here, heard a few times on IRC that I need to read-up on MIB and OID's. =) My brain refuse to fulle understand it though, not sure why.
Have added a Force10 s60 switch to observium. Mostly it's fine but I do miss sensors for PSU and the Fans.
Here's a discovery.php -dd of the device: http://pastebin.com/D7FNqgVi
Here's an (attempt) of snmpwalking it. Still not sure I do this the right way... http://pastebin.com/DnkZtkvX
At around line 1788 and forward you can see the PSU and fan objects (line numbers in this paste is wrong).
1. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumFanTrays.1 = INTEGER: 2 2. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumFanTrays.2 = INTEGER: 0 3. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPowerSupplies.1 = INTEGER: 1 4. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPowerSupplies.2 = INTEGER: 0 5. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPluggableModules.1 = INTEGER: 2 6. F10-S-SERIES-CHASSIS-MIB::chStackUnitNumPluggableModules.2 = INTEGER: 0 7. F10-S-SERIES-CHASSIS-MIB::chStackUnitRowStatus.1 = INTEGER: active(1) 8. F10-S-SERIES-CHASSIS-MIB::chStackUnitRowStatus.2 = INTEGER: active(1) 9. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyIndex.1.1 = INTEGER: 1 10. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyIndex.1.2 = INTEGER: 2 11. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyOperStatus.1.1 = INTEGER: up(1) 12. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyOperStatus.1.2 = INTEGER: down(2) 13. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyType.1.1 = INTEGER: ac(1) 14. F10-S-SERIES-CHASSIS-MIB::chSysPowerSupplyType.1.2 = INTEGER: 0 15. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayIndex.1.1 = INTEGER: 1 16. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayIndex.1.2 = INTEGER: 2 17. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayOperStatus.1.1 = INTEGER: up(1) 18. F10-S-SERIES-CHASSIS-MIB::chSysFanTrayOperStatus.1.2 = INTEGER: up(1)
I looked at the documentation for something about expanding on existing device support. Couldn't find that and I assume it's not that easy? Have anyone added support for this in their observium installation or can point me in the direction on how to go about it (in a friendly way...).
Cheers and thanks
-- Henrik Cednert cto | compositor
Filmlance International | www.filmlance.sehttp://www.filmlance.se mobile [ + 46 (0)704 71 89 54tel:%5B%20%2B%2046%20%280%29704%2071%2089%2054 ] skype [ cednert ]
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (2)
-
Henrik Cednert (Filmlance) -
Markus Klock