Note where the cd is to move to the correct dir in the command
[root@observium observium]# cat /etc/cron.d/observium 33 */3 * * * Useracct cd /opt/observium/ && ./discovery.php -h all >> /dev/null 2>&1 */5 * * * * Useracct cd /opt/observium/ && ./discovery.php -h new >> /dev/null 2>&1
# */5 * * * * Useracct cd /opt/observium/ && ./poller.php -h all >> /dev/null 2>&1 */5 * * * * Useracct /opt/observium/poller-wrapper.py >> /dev/null 2>&1
*/5 * * * * Useracct /opt/observium/poll-billing.php >> /dev/null 2>&1 01 * * * * Useracct /opt/observium/billing-calculate.php >> /dev/null 2>&1
# Run housekeeping script daily for syslog, eventlog and alert log 13 5 * * * Useracct /opt/observium/housekeeping.php -sel >> /dev/null 2>&1 # Run housekeeping script daily for rrds, ports, orphaned entries in the database and performance data 47 4 * * * Useracct /opt/observium/housekeeping.php -rptb >> /dev/null 2>&1
-- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878
On January 4, 2020 at 12:39:06 PM, Ray Poorman (rpoorman@cssnw.com) wrote:
When you run the job what directory are you sitting in.. are there absolute paths? if you are say in /root and run /opt/observium/poller.php does it fail I bet it does or it doesn’t know where config file is.
Are these set right? ### Locations $config['install_dir'] = "/opt/observium"; $config['html_dir'] = $config['install_dir'] . "/html"; $config['rrd_dir'] = $config['install_dir'] . "/rrd"; $config['log_file'] = $config['install_dir'] . "/observium.log”;
Here is my /etc/cron.d/observium file
-- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878
On January 4, 2020 at 11:27:11 AM, Reiner Marsollek via observium (observium@observium.org) wrote:
Hello,
here's the problem. If I start the poller-wrapper manually in the shell it works without problems. But if it is started by the cronjob, I get the following error message: ERROR: Could not load or parse observium configuration, are PATHs correct? Does anyone know the problem and how to fix it?
Reiner _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Same Problem when i start the cron manuel. All pathes in config are correct!
Ausgabe des Befehls cd /opt/observium/ && ./poller-wrapper.py ..
ERROR: Could not load or parse observium configuration, are PATHs correct?
------ Originalnachricht ------ Von: "Ray Poorman via observium" observium@observium.org An: "Observium" observium@observium.org Cc: "Ray Poorman" rpoorman@cssnw.com Gesendet: 04.01.2020 21:39:59 Betreff: Re: [Observium] Cronjob Problem
Note where the cd is to move to the correct dir in the command
[root@observium observium]# cat /etc/cron.d/observium 33 */3 * * * Useracct cd /opt/observium/ && ./discovery.php -h all >> /dev/null 2>&1 */5 * * * * Useracct cd /opt/observium/ && ./discovery.php -h new >> /dev/null 2>&1
# */5 * * * * Useracct cd /opt/observium/ && ./poller.php -h all
/dev/null 2>&1
*/5 * * * * Useracct /opt/observium/poller-wrapper.py >> /dev/null 2>&1
*/5 * * * * Useracct /opt/observium/poll-billing.php >> /dev/null 2>&1 01 * * * * Useracct /opt/observium/billing-calculate.php >> /dev/null 2>&1
# Run housekeeping script daily for syslog, eventlog and alert log 13 5 * * * Useracct /opt/observium/housekeeping.php -sel >> /dev/null 2>&1 # Run housekeeping script daily for rrds, ports, orphaned entries in the database and performance data 47 4 * * * Useracct /opt/observium/housekeeping.php -rptb >> /dev/null 2>&1
-- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878
On January 4, 2020 at 12:39:06 PM, Ray Poorman (rpoorman@cssnw.com) wrote:
When you run the job what directory are you sitting in.. are there absolute paths? if you are say in /root and run /opt/observium/poller.php does it fail I bet it does or it doesn’t know where config file is.
Are these set right? ### Locations $config['install_dir'] = "/opt/observium"; $config['html_dir'] = $config['install_dir'] . "/html"; $config['rrd_dir'] = $config['install_dir'] . "/rrd"; $config['log_file'] = $config['install_dir'] . "/observium.log”;
Here is my /etc/cron.d/observium file
-- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878
On January 4, 2020 at 11:27:11 AM, Reiner Marsollek via observium (observium@observium.org) wrote:
Hello,
here's the problem. If I start the poller-wrapper manually in the shell it works without problems. But if it is started by the cronjob, I get the following error message: ERROR: Could not load or parse observium configuration, are PATHs correct? Does anyone know the problem and how to fix it?
Reiner _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
What is this installed on? Did you follow the install guide or use the install script?
This is likely either permissions or the PHP interpreter not running the config generator.
Adam.
Sent from BlueMail
On 5 Jan 2020, 13:41, at 13:41, Reiner Marsollek via observium observium@observium.org wrote:
Same Problem when i start the cron manuel. All pathes in config are correct!
Ausgabe des Befehls cd /opt/observium/ && ./poller-wrapper.py ..
ERROR: Could not load or parse observium configuration, are PATHs correct?
------ Originalnachricht ------ Von: "Ray Poorman via observium" observium@observium.org An: "Observium" observium@observium.org Cc: "Ray Poorman" rpoorman@cssnw.com Gesendet: 04.01.2020 21:39:59 Betreff: Re: [Observium] Cronjob Problem
Note where the cd is to move to the correct dir in the command
[root@observium observium]# cat /etc/cron.d/observium 33 */3 * * * Useracct cd /opt/observium/ && ./discovery.php -h
all >> /dev/null 2>&1 */5 * * * * Useracct cd /opt/observium/ && ./discovery.php -h new >> /dev/null 2>&1
# */5 * * * * Useracct cd /opt/observium/ && ./poller.php -h
all
/dev/null 2>&1
*/5 * * * * Useracct /opt/observium/poller-wrapper.py >> /dev/null
2>&1
*/5 * * * * Useracct /opt/observium/poll-billing.php >> /dev/null 2>&1 01 * * * * Useracct /opt/observium/billing-calculate.php >> /dev/null 2>&1
# Run housekeeping script daily for syslog, eventlog and alert log 13 5 * * * Useracct /opt/observium/housekeeping.php -sel >> /dev/null 2>&1 # Run housekeeping script daily for rrds, ports, orphaned entries in the database and performance data 47 4 * * * Useracct /opt/observium/housekeeping.php -rptb >> /dev/null
2>&1
-- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878
On January 4, 2020 at 12:39:06 PM, Ray Poorman (rpoorman@cssnw.com) wrote:
When you run the job what directory are you sitting in.. are there absolute paths? if you are say in /root and run /opt/observium/poller.php does it fail I bet it does or it doesn’t know where config file is.
Are these set right? ### Locations $config['install_dir'] = "/opt/observium"; $config['html_dir'] = $config['install_dir'] . "/html"; $config['rrd_dir'] = $config['install_dir'] . "/rrd"; $config['log_file'] = $config['install_dir'] . "/observium.log”;
Here is my /etc/cron.d/observium file
-- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878
On January 4, 2020 at 11:27:11 AM, Reiner Marsollek via observium (observium@observium.org) wrote:
Hello,
here's the problem. If I start the poller-wrapper manually in the shell it works without problems. But if it is started by the
cronjob,
I get the following error message: ERROR: Could not load or parse observium configuration, are PATHs correct? Does anyone know the problem and how to fix it?
Reiner _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I have installed it with the install script on a raspberry pi3.
Am 5. Januar 2020 3:13:30 nachm. schrieb Adam Armstrong via observium observium@observium.org:
What is this installed on? Did you follow the install guide or use the install script?
This is likely either permissions or the PHP interpreter not running the config generator.
Adam.
Sent from BlueMail On 5 Jan 2020, at 13:41, Reiner Marsollek via observium observium@observium.org wrote: Same Problem when i start the cron manuel. All pathes in config are correct!
Ausgabe des Befehls cd /opt/observium/ && ./poller-wrapper.py ..
ERROR: Could not load or parse observium configuration, are PATHs correct?
------ Originalnachricht ------ Von: "Ray Poorman via observium" < observium@observium.org> An: "Observium" < observium@observium.org> Cc: "Ray Poorman" < rpoorman@cssnw.com> Gesendet: 04.01.2020 21:39:59 Betreff: Re: [Observium] Cronjob Problem
Note where the cd is to move to the correct dir in the command
[root@observium observium]# cat /etc/cron.d/observium 33 */3 * * * Useracct cd /opt/observium/ && ./discovery.php -h all
/dev/null 2>&1
*/5 * * * * Useracct cd /opt/observium/ && ./discovery.php -h new >> /dev/null 2>&1
# */5 * * * * Useracct cd /opt/observium/ && ./poller.php -h all >> /dev/null 2>&1 */5 * * * * Useracct /opt/observium/poller-wrapper.py >> /dev/null 2>&1
*/5 * * * * Useracct /opt/observium/poll-billing.php >> /dev/null 2>&1 01 * * * * Useracct /opt/observium/billing-calculate.php >> /dev/null 2>&1
# Run housekeeping script daily for syslog, eventlog and alert log 13 5 * * * Useracct /opt/observium/housekeeping.php -sel >> /dev/null 2>&1 # Run housekeeping script daily for rrds, ports, orphaned entries in the database and performance data 47 4 * * * Useracct /opt/observium/housekeeping.php -rptb >> /dev/null 2>&1 -- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878 On January 4, 2020 at 12:39:06 PM, Ray Poorman (rpoorman@cssnw.com) wrote:
When you run the job what directory are you sitting in.. are there absolute paths? if you are say in /root and run /opt/observium/poller.php does it fail I bet it does or it doesn’t know where config file is.
Are these set right? ### Locations $config['install_dir'] = "/opt/observium"; $config['html_dir'] = $config['install_dir'] . "/html"; $config['rrd_dir'] = $config['install_dir'] . "/rrd"; $config['log_file'] = $config['install_dir'] . "/observium.log”;
Here is my /etc/cron.d/observium file
-- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878 On January 4, 2020 at 11:27:11 AM, Reiner Marsollek via observium (observium@observium.org) wrote:
Hello,
here's the problem. If I start the poller-wrapper manually in the shell it works without problems. But if it is started by the cronjob, I get the following error message: ERROR: Could not load or parse observium configuration, are PATHs correct? Does anyone know the problem and how to fix it?
Reiner _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Is this on a Debian variant?
It's possible the variant is different in such a way that the script doesn't cater for.
Still, it's likely either permissions, or the PHP interpreter is behaving oddly somehow.
Running the wrapper as the user that executes the from jobs works? (Running it as root for diagnostic purposes is worthless, and will break your installation's file permissions)
Adam.
Sent from BlueMail
On 5 Jan 2020, 14:56, at 14:56, Reiner Marsollek via observium observium@observium.org wrote:
I have installed it with the install script on a raspberry pi3.
Am 5. Januar 2020 3:13:30 nachm. schrieb Adam Armstrong via observium observium@observium.org:
What is this installed on? Did you follow the install guide or use
the
install script?
This is likely either permissions or the PHP interpreter not running
the
config generator.
Adam.
Sent from BlueMail On 5 Jan 2020, at 13:41, Reiner Marsollek via observium observium@observium.org wrote: Same Problem when i start the cron manuel. All pathes in config are
correct!
Ausgabe des Befehls cd /opt/observium/ && ./poller-wrapper.py ..
ERROR: Could not load or parse observium configuration, are PATHs
correct?
------ Originalnachricht ------ Von: "Ray Poorman via observium" < observium@observium.org> An: "Observium" < observium@observium.org> Cc: "Ray Poorman" < rpoorman@cssnw.com> Gesendet: 04.01.2020 21:39:59 Betreff: Re: [Observium] Cronjob Problem
Note where the cd is to move to the correct dir in the command
[root@observium observium]# cat /etc/cron.d/observium 33 */3 * * * Useracct cd /opt/observium/ && ./discovery.php
-h all
/dev/null 2>&1
*/5 * * * * Useracct cd /opt/observium/ && ./discovery.php -h
new >>
/dev/null 2>&1
# */5 * * * * Useracct cd /opt/observium/ && ./poller.php -h
all >>
/dev/null 2>&1 */5 * * * * Useracct /opt/observium/poller-wrapper.py >> /dev/null
2>&1
*/5 * * * * Useracct /opt/observium/poll-billing.php >>
/dev/null 2>&1
01 * * * * Useracct /opt/observium/billing-calculate.php >> /dev/null 2>&1
# Run housekeeping script daily for syslog, eventlog and alert log 13 5 * * * Useracct /opt/observium/housekeeping.php -sel >>
/dev/null 2>&1
# Run housekeeping script daily for rrds, ports, orphaned entries in
the
database and performance data 47 4 * * * Useracct /opt/observium/housekeeping.php -rptb >>
/dev/null 2>&1
-- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878 On January 4, 2020 at 12:39:06 PM, Ray Poorman (rpoorman@cssnw.com)
wrote:
When you run the job what directory are you sitting in.. are there
absolute
paths? if you are say in /root and run /opt/observium/poller.php
does it
fail I bet it does or it doesn’t know where config file is.
Are these set right? ### Locations $config['install_dir'] = "/opt/observium"; $config['html_dir'] = $config['install_dir'] . "/html"; $config['rrd_dir'] = $config['install_dir'] . "/rrd"; $config['log_file'] = $config['install_dir'] .
"/observium.log”;
Here is my /etc/cron.d/observium file
-- Ray Poorman, CTO CSS Integration & Communications 1911 C St Bellingham WA 98225 360-671-4878 On January 4, 2020 at 11:27:11 AM, Reiner Marsollek via observium (observium@observium.org) wrote:
Hello,
here's the problem. If I start the poller-wrapper manually in the
shell it
works without problems. But if it is started by the cronjob, I get
the
following error message: ERROR: Could not load or parse observium configuration, are PATHs
correct?
Does anyone know the problem and how to fix it?
Reiner _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (3)
-
Adam Armstrong -
Ray Poorman -
Reiner Marsollek