How to add a device which only responds to ping/icmp?
Hi
How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests?
We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp.
(The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again)
The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php
I appreciate any help :)
Best,
Thomas
https://docs.observium.org/ping_only/
From: observium observium-bounces@observium.org On Behalf Of Thomas Stather via observium Sent: 02 May 2022 11:35 To: observium@observium.org Cc: Thomas Stather tstather@mr.mpg.de Subject: [Observium] How to add a device which only responds to ping/icmp?
Hi
How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests?
We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp.
(The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again)
The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php
I appreciate any help :)
Best,
Thomas
Hi
I don't really get it sorry, it seems that you can add the probe check after the device is added to Observium.
However, how can i add the device (./add_device.php or via ui) to Observium if it doesn't speak SNMP. For me it always fails with
Could not reach apar01 with given SNMP parameters using v1.
Best, Thomas
Am 02.05.22 um 16:42 schrieb adama--- via observium:
https://docs.observium.org/ping_only/
*From:*observium observium-bounces@observium.org *On Behalf Of *Thomas Stather via observium *Sent:* 02 May 2022 11:35 *To:* observium@observium.org *Cc:* Thomas Stather tstather@mr.mpg.de *Subject:* [Observium] How to add a device which only responds to ping/icmp?
Hi
How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests?
We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp.
(The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again)
The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php
I appreciate any help :)
Best,
Thomas
-- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
You can’t add non-SNMPable devices to Observium’s SNMP polling system, no.
Read the page I linked, it explains.
From: observium observium-bounces@observium.org On Behalf Of Thomas Stather via observium Sent: 03 May 2022 09:57 To: observium@observium.org Cc: Thomas Stather tstather@mr.mpg.de Subject: Re: [Observium] How to add a device which only responds to ping/icmp?
Hi
I don't really get it sorry, it seems that you can add the probe check after the device is added to Observium.
However, how can i add the device (./add_device.php or via ui) to Observium if it doesn't speak SNMP. For me it always fails with
Could not reach apar01 with given SNMP parameters using v1.
Best,
Thomas
Am 02.05.22 um 16:42 schrieb adama--- via observium:
https://docs.observium.org/ping_only/
From: observium mailto:observium-bounces@observium.org observium-bounces@observium.org On Behalf Of Thomas Stather via observium Sent: 02 May 2022 11:35 To: observium@observium.org mailto:observium@observium.org Cc: Thomas Stather mailto:tstather@mr.mpg.de tstather@mr.mpg.de Subject: [Observium] How to add a device which only responds to ping/icmp?
Hi
How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests?
We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp.
(The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again)
The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php
I appreciate any help :)
Best,
Thomas
Hi
I was able to set up the probe, but i cannot add it to a device since the device doesn't exist (and cannot be added since it cannot speak snmp).
What am i doing wrong?
Best,
Thomas
Am 03.05.22 um 13:15 schrieb adama--- via observium:
You can’t add non-SNMPable devices to Observium’s SNMP polling system, no.
Read the page I linked, it explains.
*From:*observium observium-bounces@observium.org *On Behalf Of *Thomas Stather via observium *Sent:* 03 May 2022 09:57 *To:* observium@observium.org *Cc:* Thomas Stather tstather@mr.mpg.de *Subject:* Re: [Observium] How to add a device which only responds to ping/icmp?
Hi
I don't really get it sorry, it seems that you can add the probe check after the device is added to Observium.
However, how can i add the device (./add_device.php or via ui) to Observium if it doesn't speak SNMP. For me it always fails with
Could not reach apar01 with given SNMP parameters using v1.
Best,
Thomas
Am 02.05.22 um 16:42 schrieb adama--- via observium:
https://docs.observium.org/ping_only/ *From:*observium <observium-bounces@observium.org> <mailto:observium-bounces@observium.org> *On Behalf Of *Thomas Stather via observium *Sent:* 02 May 2022 11:35 *To:* observium@observium.org *Cc:* Thomas Stather <tstather@mr.mpg.de> <mailto:tstather@mr.mpg.de> *Subject:* [Observium] How to add a device which only responds to ping/icmp? Hi How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests? We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp. (The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again) The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php I appreciate any help :) Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an! _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
If you haven't already; add the Observium host as a device.
Then add the icmp probe to your Observium device.
Michael
On 3 May 2022, at 11:10 pm, Thomas Stather via observium observium@observium.org wrote:
Hi
I was able to set up the probe, but i cannot add it to a device since the device doesn't exist (and cannot be added since it cannot speak snmp).
What am i doing wrong?
Best,
Thomas
Am 03.05.22 um 13:15 schrieb adama--- via observium:
You can’t add non-SNMPable devices to Observium’s SNMP polling system, no.
Read the page I linked, it explains.
From: observium observium-bounces@observium.org mailto:observium-bounces@observium.org On Behalf Of Thomas Stather via observium Sent: 03 May 2022 09:57 To: observium@observium.org mailto:observium@observium.org Cc: Thomas Stather tstather@mr.mpg.de mailto:tstather@mr.mpg.de Subject: Re: [Observium] How to add a device which only responds to ping/icmp?
Hi
I don't really get it sorry, it seems that you can add the probe check after the device is added to Observium.
However, how can i add the device (./add_device.php or via ui) to Observium if it doesn't speak SNMP. For me it always fails with
Could not reach apar01 with given SNMP parameters using v1.
Best, Thomas
Am 02.05.22 um 16:42 schrieb adama--- via observium: https://docs.observium.org/ping_only/ https://docs.observium.org/ping_only/
From: observium observium-bounces@observium.org mailto:observium-bounces@observium.org On Behalf Of Thomas Stather via observium Sent: 02 May 2022 11:35 To: observium@observium.org mailto:observium@observium.org Cc: Thomas Stather tstather@mr.mpg.de mailto:tstather@mr.mpg.de Subject: [Observium] How to add a device which only responds to ping/icmp?
Hi
How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests?
We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp.
(The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again)
The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php
I appreciate any help :)
Best,
Thomas
-- Thomas Stather IT Services
VCP4, VCP6-DCV, VCP6.5-DCV
Tel: +49 6221 486 628 Fax: +49 6221 486 561
Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Thomas Stather IT Services
VCP4, VCP6-DCV, VCP6.5-DCV
Tel: +49 6221 486 628 Fax: +49 6221 486 561
Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Thomas Stather IT Services
VCP4, VCP6-DCV, VCP6.5-DCV
Tel: +49 6221 486 628 Fax: +49 6221 486 561
Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an! _______________________________________________ observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi from Germany,
I think, we are talking about different use-cases.
Adam implemented a (great) possibility to add ping/http/what-ever checks (https://docs.observium.org/ping_only/) to a running Observium host.
The use-case of Thomas (and me) is a little bit different:
We need a possibility to add a device to Observium with “reduced features” (according to the missing SNMP connectivity) but full functionality (were possible).
In my opinion a switch to skip the SNMP-poll during the add-process and a (manual) change from SNMP to a “ping poller” would fit our needs.
Location, Type, Description … can be edited manually … and as “full-featured” device the great API can be used for data-exchange.
Regards,
Philipp
Von: observium observium-bounces@observium.org Im Auftrag von Michael via observium Gesendet: Mittwoch, 4. Mai 2022 01:28 An: Observium observium@observium.org Cc: Michael obslist@smarsz.com Betreff: Re: [Observium] How to add a device which only responds to ping/icmp?
If you haven't already; add the Observium host as a device.
Then add the icmp probe to your Observium device.
Michael
On 3 May 2022, at 11:10 pm, Thomas Stather via observium <observium@observium.org mailto:observium@observium.org > wrote:
Hi
I was able to set up the probe, but i cannot add it to a device since the device doesn't exist (and cannot be added since it cannot speak snmp).
What am i doing wrong?
Best,
Thomas
Am 03.05.22 um 13:15 schrieb adama--- via observium:
You can’t add non-SNMPable devices to Observium’s SNMP polling system, no.
Read the page I linked, it explains.
From: observium mailto:observium-bounces@observium.org observium-bounces@observium.org On Behalf Of Thomas Stather via observium Sent: 03 May 2022 09:57 To: mailto:observium@observium.org observium@observium.org Cc: Thomas Stather mailto:tstather@mr.mpg.de tstather@mr.mpg.de Subject: Re: [Observium] How to add a device which only responds to ping/icmp?
Hi
I don't really get it sorry, it seems that you can add the probe check after the device is added to Observium.
However, how can i add the device (./add_device.php or via ui) to Observium if it doesn't speak SNMP. For me it always fails with
Could not reach apar01 with given SNMP parameters using v1.
Best,
Thomas
Am 02.05.22 um 16:42 schrieb adama--- via observium:
https://docs.observium.org/ping_only/ https://docs.observium.org/ping_only/
From: observium mailto:observium-bounces@observium.org observium-bounces@observium.org On Behalf Of Thomas Stather via observium Sent: 02 May 2022 11:35 To: mailto:observium@observium.org observium@observium.org Cc: Thomas Stather mailto:tstather@mr.mpg.de tstather@mr.mpg.de Subject: [Observium] How to add a device which only responds to ping/icmp?
Hi
How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests?
We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp.
(The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again)
The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php
I appreciate any help :)
Best,
Thomas
This doesn't really make any sense.
99.999% of Observium's functionality is SNMP.
If a device doesn't do SNMP, it's not a device for us. It's a lightbulb, or a banana. It can't go into our interface, because we'd need 10 trillion if() statments to handle all of the things it didn't provide, and you'd end up with completely blank pages with a hostname at the top.
adam.
Flesch, Philipp via observium wrote on 13/02/2023 09:03:
Hi from Germany,
I think, we are talking about different use-cases.
Adam implemented a (great) possibility to add ping/http/what-ever checks (https://docs.observium.org/ping_only/) to a running Observium host.
The use-case of Thomas (and me) is a little bit different:
We need a possibility to add a device to Observium with “reduced features” (according to the missing SNMP connectivity) but full functionality (were possible).
In my opinion a switch to skip the SNMP-poll during the add-process and a (manual) change from SNMP to a “ping poller” would fit our needs.
Location, Type, Description … can be edited manually … and as “full-featured” device the great API can be used for data-exchange.
Regards,
Philipp
*Von:* observium observium-bounces@observium.org *Im Auftrag von *Michael via observium *Gesendet:* Mittwoch, 4. Mai 2022 01:28 *An:* Observium observium@observium.org *Cc:* Michael obslist@smarsz.com *Betreff:* Re: [Observium] How to add a device which only responds to ping/icmp?
If you haven't already; add the Observium host as a device.
Then add the icmp probe to your Observium device.
Michael
On 3 May 2022, at 11:10 pm, Thomas Stather via observium <observium@observium.org <mailto:observium@observium.org>> wrote: Hi I was able to set up the probe, but i cannot add it to a device since the device doesn't exist (and cannot be added since it cannot speak snmp). What am i doing wrong? Best, Thomas Am 03.05.22 um 13:15 schrieb adama--- via observium: You can’t add non-SNMPable devices to Observium’s SNMP polling system, no. Read the page I linked, it explains. *From:*observium<observium-bounces@observium.org> <mailto:observium-bounces@observium.org>*On Behalf Of*Thomas Stather via observium *Sent:*03 May 2022 09:57 *To:*observium@observium.org <mailto:observium@observium.org> *Cc:*Thomas Stather<tstather@mr.mpg.de> <mailto:tstather@mr.mpg.de> *Subject:*Re: [Observium] How to add a device which only responds to ping/icmp? Hi I don't really get it sorry, it seems that you can add the probe check after the device is added to Observium. However, how can i add the device (./add_device.php or via ui) to Observium if it doesn't speak SNMP. For me it always fails with Could not reach apar01 with given SNMP parameters using v1. Best, Thomas Am 02.05.22 um 16:42 schrieb adama--- via observium: https://docs.observium.org/ping_only/ *From:*observium<observium-bounces@observium.org> <mailto:observium-bounces@observium.org>*On Behalf Of*Thomas Stather via observium *Sent:*02 May 2022 11:35 *To:*observium@observium.org <mailto:observium@observium.org> *Cc:*Thomas Stather<tstather@mr.mpg.de> <mailto:tstather@mr.mpg.de> *Subject:*[Observium] How to add a device which only responds to ping/icmp? Hi How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests? We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp. (The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again) The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php I appreciate any help :) Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an! _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an! _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an! _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list -- observium@lists.observium.org To unsubscribe send an email to observium-leave@lists.observium.org
That is what we are looking for.
tir. 14. feb. 2023, 22:29 skrev Adam Armstrong via observium < observium@lists.observium.org>:
This doesn't really make any sense.
99.999% of Observium's functionality is SNMP.
If a device doesn't do SNMP, it's not a device for us. It's a lightbulb, or a banana. It can't go into our interface, because we'd need 10 trillion if() statments to handle all of the things it didn't provide, and you'd end up with completely blank pages with a hostname at the top.
adam.
Flesch, Philipp via observium wrote on 13/02/2023 09:03:
Hi from Germany,
I think, we are talking about different use-cases.
Adam implemented a (great) possibility to add ping/http/what-ever checks ( https://docs.observium.org/ping_only/) to a running Observium host.
The use-case of Thomas (and me) is a little bit different:
We need a possibility to add a device to Observium with “reduced features” (according to the missing SNMP connectivity) but full functionality (were possible).
In my opinion a switch to skip the SNMP-poll during the add-process and a (manual) change from SNMP to a “ping poller” would fit our needs.
Location, Type, Description … can be edited manually … and as “full-featured” device the great API can be used for data-exchange.
Regards,
Philipp
*Von:* observium observium-bounces@observium.org observium-bounces@observium.org *Im Auftrag von *Michael via observium *Gesendet:* Mittwoch, 4. Mai 2022 01:28 *An:* Observium observium@observium.org observium@observium.org *Cc:* Michael obslist@smarsz.com obslist@smarsz.com *Betreff:* Re: [Observium] How to add a device which only responds to ping/icmp?
If you haven't already; add the Observium host as a device.
Then add the icmp probe to your Observium device.
Michael
On 3 May 2022, at 11:10 pm, Thomas Stather via observium < observium@observium.org> wrote:
Hi
I was able to set up the probe, but i cannot add it to a device since the device doesn't exist (and cannot be added since it cannot speak snmp).
What am i doing wrong?
Best,
Thomas
Am 03.05.22 um 13:15 schrieb adama--- via observium:
You can’t add non-SNMPable devices to Observium’s SNMP polling system, no.
Read the page I linked, it explains.
*From:* observium observium-bounces@observium.org observium-bounces@observium.org *On Behalf Of *Thomas Stather via observium *Sent:* 03 May 2022 09:57 *To:* observium@observium.org *Cc:* Thomas Stather tstather@mr.mpg.de tstather@mr.mpg.de *Subject:* Re: [Observium] How to add a device which only responds to ping/icmp?
Hi
I don't really get it sorry, it seems that you can add the probe check after the device is added to Observium.
However, how can i add the device (./add_device.php or via ui) to Observium if it doesn't speak SNMP. For me it always fails with
Could not reach apar01 with given SNMP parameters using v1.
Best,
Thomas
Am 02.05.22 um 16:42 schrieb adama--- via observium:
https://docs.observium.org/ping_only/
*From:* observium observium-bounces@observium.org observium-bounces@observium.org *On Behalf Of *Thomas Stather via observium *Sent:* 02 May 2022 11:35 *To:* observium@observium.org *Cc:* Thomas Stather tstather@mr.mpg.de tstather@mr.mpg.de *Subject:* [Observium] How to add a device which only responds to ping/icmp?
Hi
How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests?
We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp.
(The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again)
The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php
I appreciate any help :)
Best,
Thomas
--
Thomas Stather
IT Services
VCP4, VCP6-DCV, VCP6.5-DCV
Tel: +49 6221 486 628
Fax: +49 6221 486 561
Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Thomas Stather
IT Services
VCP4, VCP6-DCV, VCP6.5-DCV
Tel: +49 6221 486 628
Fax: +49 6221 486 561
Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Thomas Stather
IT Services
VCP4, VCP6-DCV, VCP6.5-DCV
Tel: +49 6221 486 628
Fax: +49 6221 486 561
Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an!
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list -- observium@lists.observium.org To unsubscribe send an email to observium-leave@lists.observium.org
-- Sent from Postbox https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campaign=reach _______________________________________________ observium mailing list -- observium@lists.observium.org To unsubscribe send an email to observium-leave@lists.observium.org
Hi
Yes, this is exactly what we need. We have a bunch of wlan aps that are managed by a wlan controller and you cannot query them with snmp directly. However (in addition to the wlan controller which is already monitored via Observium) i want all aps to be monitored via ping only to be able to see issues like poe-failure, switch/cable failure etc.
Best,
Thomas
Am 13.02.2023 um 10:03 schrieb Flesch, Philipp via observium:
Hi from Germany,
I think, we are talking about different use-cases.
Adam implemented a (great) possibility to add ping/http/what-ever checks (https://docs.observium.org/ping_only/) to a running Observium host.
The use-case of Thomas (and me) is a little bit different:
We need a possibility to add a device to Observium with “reduced features” (according to the missing SNMP connectivity) but full functionality (were possible).
In my opinion a switch to skip the SNMP-poll during the add-process and a (manual) change from SNMP to a “ping poller” would fit our needs.
Location, Type, Description … can be edited manually … and as “full-featured” device the great API can be used for data-exchange.
Regards,
Philipp
*Von:* observium observium-bounces@observium.org *Im Auftrag von *Michael via observium *Gesendet:* Mittwoch, 4. Mai 2022 01:28 *An:* Observium observium@observium.org *Cc:* Michael obslist@smarsz.com *Betreff:* Re: [Observium] How to add a device which only responds to ping/icmp?
If you haven't already; add the Observium host as a device.
Then add the icmp probe to your Observium device.
Michael
On 3 May 2022, at 11:10 pm, Thomas Stather via observium <observium@observium.org> wrote: Hi I was able to set up the probe, but i cannot add it to a device since the device doesn't exist (and cannot be added since it cannot speak snmp). What am i doing wrong? Best, Thomas Am 03.05.22 um 13:15 schrieb adama--- via observium: You can’t add non-SNMPable devices to Observium’s SNMP polling system, no. Read the page I linked, it explains. *From:*observium<observium-bounces@observium.org> <mailto:observium-bounces@observium.org>*On Behalf Of*Thomas Stather via observium *Sent:*03 May 2022 09:57 *To:*observium@observium.org <mailto:observium@observium.org> *Cc:*Thomas Stather<tstather@mr.mpg.de> <mailto:tstather@mr.mpg.de> *Subject:*Re: [Observium] How to add a device which only responds to ping/icmp? Hi I don't really get it sorry, it seems that you can add the probe check after the device is added to Observium. However, how can i add the device (./add_device.php or via ui) to Observium if it doesn't speak SNMP. For me it always fails with Could not reach apar01 with given SNMP parameters using v1. Best, Thomas Am 02.05.22 um 16:42 schrieb adama--- via observium: https://docs.observium.org/ping_only/ <https://docs.observium.org/ping_only/> *From:*observium<observium-bounces@observium.org> <mailto:observium-bounces@observium.org>*On Behalf Of*Thomas Stather via observium *Sent:*02 May 2022 11:35 *To:*observium@observium.org <mailto:observium@observium.org> *Cc:*Thomas Stather<tstather@mr.mpg.de> <mailto:tstather@mr.mpg.de> *Subject:*[Observium] How to add a device which only responds to ping/icmp? Hi How can i add a device which cannot (!) speak any snmp and only responds to ping/icmp requests? We have an Aruba wlan setup (Mobility Master and two Mobility Controllers) and i want to add the aps to Observium, so that they are monitored but only by ping/icmp. (The MM and the two MCs are already added to Observium, but i cannot see if one AP went offline or came back online again) The aps cannot speak any snmp when managed by the MM or MC, thats why it fails when i try to add one via ./add_device.php I appreciate any help :) Best, Thomas -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an! _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an! _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> -- Thomas Stather IT Services VCP4, VCP6-DCV, VCP6.5-DCV Tel: +49 6221 486 628 Fax: +49 6221 486 561 Bevor Sie diese Mail ausdrucken, prüfen Sie bitte ob dies wirklich nötig ist. Umweltschutz geht uns alle an! _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium>
observium mailing list --observium@lists.observium.org To unsubscribe send an email toobservium-leave@lists.observium.org
participants (6)
-
Adam Armstrong
-
adama@observium.org
-
Flesch, Philipp
-
Michael
-
Thomas Stather
-
Torstein Eide