Disabling redundancy/stack metrics for standalone Cisco switch
Hello,
I have commissioned a few new Cisco 3650 switches (WS-C3650-24TD-L) which are stacking-capable, but I have them running standalone. They're on IOS XE 16.6.5 and Observium is detecting/reporting the redundancy attributes for these switches but because they're not stacked, I'm getting an alert for 'nonRedundant'.
cRFCfgRedundancyOperMode = 1
Is there a way I can force Observium to ignore the redundancy metrics for these switches? I tried disabling CISCO-RF-MIB on the device but it still persists and when I run './poller.php -h my3650switch -m status' I see the redundancy attributes coming through (assumed I shouldn't? not sure).
Observium 19.1.9673
EB Games | ZiNG Pop Culture | Peter Watts | Infrastructure Supervisor | Australia & New Zealand | Peter.Watts@ebgames.commailto:Peter.Watts@ebgames.com | +61 7 3860 7757 | 0438 636 110
You need to do a discovery after disabling the mib.
Adam.
Sent from BlueMail
On 18 Jan 2019, 00:05, at 00:05, Peter Watts via observium observium@observium.org wrote:
Hello,
I have commissioned a few new Cisco 3650 switches (WS-C3650-24TD-L) which are stacking-capable, but I have them running standalone. They're on IOS XE 16.6.5 and Observium is detecting/reporting the redundancy attributes for these switches but because they're not stacked, I'm getting an alert for 'nonRedundant'.
cRFCfgRedundancyOperMode = 1
Is there a way I can force Observium to ignore the redundancy metrics for these switches? I tried disabling CISCO-RF-MIB on the device but it still persists and when I run './poller.php -h my3650switch -m status' I see the redundancy attributes coming through (assumed I shouldn't? not sure).
Observium 19.1.9673
EB Games | ZiNG Pop Culture | Peter Watts | Infrastructure Supervisor | Australia & New Zealand | Peter.Watts@ebgames.commailto:Peter.Watts@ebgames.com | +61 7 3860 7757 | 0438 636 110
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
After doing a discovery, I’m still seeing the CISCO-RF-MIB:
##### Module Start: sensors #####
o CISCO-ENTITY-SENSOR-MIB ... o CISCO-ENVMON-MIB ....... Fans ... o CISCO-ENTITY-FRU-CONTROL-MIB o CISCO-POWER-ETHERNET-EXT-MIB o POWER-ETHERNET-MIB o ENTITY-SENSOR-MIB o CISCO-STACKWISE-MIB o CISCO-RF-MIB cRFCfgRedundancyOperMode [.] cRFStatusUnitState [.] cRFStatusPeerUnitState [.]
o Duration 1.5137s
EB Games | ZiNG Pop Culture | Peter Watts
From: Adam Armstrong adama@memetic.org Sent: Friday, 18 January 2019 11:01 AM To: Peter Watts via observium observium@observium.org Cc: Peter Watts Peter.Watts@ebgames.com Subject: Re: [Observium] Disabling redundancy/stack metrics for standalone Cisco switch
You need to do a discovery after disabling the mib. Adam. Sent from BlueMailhttp://www.bluemail.me/r?b=14063 On 18 Jan 2019, at 00:05, Peter Watts via observium <observium@observium.orgmailto:observium@observium.org> wrote: Hello,
I have commissioned a few new Cisco 3650 switches (WS-C3650-24TD-L) which are stacking-capable, but I have them running standalone. They're on IOS XE 16.6.5 and Observium is detecting/reporting the redundancy attributes for these switches but because they're not stacked, I'm getting an alert for 'nonRedundant’.
cRFCfgRedundancyOperMode = 1
Is there a way I can force Observium to ignore the redundancy metrics for these switches? I tried disabling CISCO-RF-MIB on the device but it still persists and when I run ‘./poller.php -h my3650switch -m status’ I see the redundancy attributes coming through (assumed I shouldn't? not sure).
Observium 19.1.9673
EB Games | ZiNG Pop Culture | Peter Watts | Infrastructure Supervisor | Australia & New Zealand | Peter.Watts@ebgames.commailto:Peter.Watts@ebgames.com | +61 7 3860 7757 | 0438 636 110
________________________________
observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Please show screenshots including hostnames of this discovery and the page showing this MIB being disabled.
adam. On 2019-01-18 01:17:49, Peter Watts via observium observium@observium.org wrote: After doing a discovery, I’m still seeing the CISCO-RF-MIB: ##### Module Start: sensors ##### o CISCO-ENTITY-SENSOR-MIB ... o CISCO-ENVMON-MIB ....... Fans ... o CISCO-ENTITY-FRU-CONTROL-MIB o CISCO-POWER-ETHERNET-EXT-MIB o POWER-ETHERNET-MIB o ENTITY-SENSOR-MIB o CISCO-STACKWISE-MIB o CISCO-RF-MIB cRFCfgRedundancyOperMode [.] cRFStatusUnitState [.] cRFStatusPeerUnitState [.] o Duration 1.5137s EB Games | ZiNG Pop Culture | Peter Watts From: Adam Armstrong adama@memetic.org Sent: Friday, 18 January 2019 11:01 AM To: Peter Watts via observium observium@observium.org Cc: Peter Watts Peter.Watts@ebgames.com Subject: Re: [Observium] Disabling redundancy/stack metrics for standalone Cisco switch You need to do a discovery after disabling the mib. Adam. Sent from BlueMail [http://www.bluemail.me/r?b=14063] On 18 Jan 2019, at 00:05, Peter Watts via observium <observium@observium.org [mailto:observium@observium.org]> wrote: Hello, I have commissioned a few new Cisco 3650 switches (WS-C3650-24TD-L) which are stacking-capable, but I have them running standalone. They're on IOS XE 16.6.5 and Observium is detecting/reporting the redundancy attributes for these switches but because they're not stacked, I'm getting an alert for 'nonRedundant’. cRFCfgRedundancyOperMode = 1 Is there a way I can force Observium to ignore the redundancy metrics for these switches? I tried disabling CISCO-RF-MIB on the device but it still persists and when I run ‘./poller.php -h my3650switch -m status’ I see the redundancy attributes coming through (assumed I shouldn't? not sure). Observium 19.1.9673 EB Games | ZiNG Pop Culture | Peter Watts | Infrastructure Supervisor | Australia & New Zealand | Peter.Watts@ebgames.com [mailto:Peter.Watts@ebgames.com] | +61 7 3860 7757 | 0438 636 110
observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
Attached
EB Games | ZiNG Pop Culture | Peter Watts
From: observium observium-bounces@observium.org On Behalf Of Adam Armstrong via observium Sent: Friday, 18 January 2019 11:19 AM To: Peter Watts via observium observium@observium.org Cc: Adam Armstrong adama@memetic.org Subject: Re: [Observium] Disabling redundancy/stack metrics for standalone Cisco switch
Please show screenshots including hostnames of this discovery and the page showing this MIB being disabled.
adam.
On 2019-01-18 01:17:49, Peter Watts via observium <observium@observium.orgmailto:observium@observium.org> wrote: After doing a discovery, I’m still seeing the CISCO-RF-MIB:
##### Module Start: sensors #####
o CISCO-ENTITY-SENSOR-MIB ... o CISCO-ENVMON-MIB ....... Fans ... o CISCO-ENTITY-FRU-CONTROL-MIB o CISCO-POWER-ETHERNET-EXT-MIB o POWER-ETHERNET-MIB o ENTITY-SENSOR-MIB o CISCO-STACKWISE-MIB o CISCO-RF-MIB cRFCfgRedundancyOperMode [.] cRFStatusUnitState [.] cRFStatusPeerUnitState [.]
o Duration 1.5137s
EB Games | ZiNG Pop Culture | Peter Watts
From: Adam Armstrong <adama@memetic.orgmailto:adama@memetic.org> Sent: Friday, 18 January 2019 11:01 AM To: Peter Watts via observium <observium@observium.orgmailto:observium@observium.org> Cc: Peter Watts <Peter.Watts@ebgames.commailto:Peter.Watts@ebgames.com> Subject: Re: [Observium] Disabling redundancy/stack metrics for standalone Cisco switch
You need to do a discovery after disabling the mib. Adam. Sent from BlueMailhttp://www.bluemail.me/r?b=14063 On 18 Jan 2019, at 00:05, Peter Watts via observium <observium@observium.orgmailto:observium@observium.org> wrote: Hello,
I have commissioned a few new Cisco 3650 switches (WS-C3650-24TD-L) which are stacking-capable, but I have them running standalone. They're on IOS XE 16.6.5 and Observium is detecting/reporting the redundancy attributes for these switches but because they're not stacked, I'm getting an alert for 'nonRedundant’.
cRFCfgRedundancyOperMode = 1
Is there a way I can force Observium to ignore the redundancy metrics for these switches? I tried disabling CISCO-RF-MIB on the device but it still persists and when I run ‘./poller.php -h my3650switch -m status’ I see the redundancy attributes coming through (assumed I shouldn't? not sure).
Observium 19.1.9673
EB Games | ZiNG Pop Culture | Peter Watts | Infrastructure Supervisor | Australia & New Zealand | Peter.Watts@ebgames.commailto:Peter.Watts@ebgames.com | +61 7 3860 7757 | 0438 636 110
________________________________
observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (2)
-
Adam Armstrong -
Peter Watts