I’m seeing something odd with my Cisco ASA, for some reason the ports summary graph isn’t working. What is odd is that each of the individual interfaces are working fine. It looks like there is something wrong with the RRD command, how can I fix this? RRDTool Output: ERROR: String ends after the = sign on 'CDEF:inB='
Total time: 0.017 | RRDtool time: 0.015s
RRDTool Command rrdtool graph /tmp/WyzPqJz6C3QdevQB.png -g --alt-autoscale --rigid --start 1447085684 --end 1447172084 --width 1159 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DejaVuSansMono' --font AXIS:7:'DejaVuSansMono' --font-render-mode normal -E CDEF:inB= CDEF:outB= CDEF:octets=inB,outB,+ CDEF:doutB=outB,-1,* CDEF:inbits=inB,8,* CDEF:outbits=outB,8,* CDEF:bits=inbits,outbits,+ CDEF:doutbits=doutB,8,* VDEF:95thin=inbits,95,PERCENT VDEF:95thout=outbits,95,PERCENT VDEF:d95thout=doutbits,5,PERCENT VDEF:totin=inB,TOTAL VDEF:avein=inbits,AVERAGE VDEF:totout=outB,TOTAL VDEF:aveout=outbits,AVERAGE VDEF:tot=octets,TOTAL COMMENT:' \l' HRULE:999999999999999#FFFFFF:'Total Rx': GPRINT:inbits:LAST:%6.2lf%s GPRINT:inbits:AVERAGE:%6.2lf%s GPRINT:inbits:MIN:%6.2lf%s GPRINT:inbits:MAX:%6.2lf%s GPRINT:totin:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Tx': GPRINT:outbits:LAST:%6.2lf%s GPRINT:outbits:AVERAGE:%6.2lf%s GPRINT:outbits:MIN:%6.2lf%s GPRINT:outbits:MAX:%6.2lf%s GPRINT:totout:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Agg': GPRINT:bits:LAST:%6.2lf%s GPRINT:bits:AVERAGE:%6.2lf%s GPRINT:bits:MIN:%6.2lf%s GPRINT:bits:MAX:%6.2lf%s GPRINT:tot:%6.2lf%sB COMMENT:'\l' HRULE:0#999999 RRDTool Files Used No RRD information returned. This may be because the graph module doesn't yet return this data.
This is probably because the device doesn't expose any non-virtual interfaces.
The device_bits graph only shows non-virtual interfaces, so if there aren't any, it doesn't draw. I've not seen this issue hit ASAs before though!
adam. On 10/11/2015 16:25:23, Jeffrey d'Ambly jeffrey.dambly@jasper.com wrote: I’m seeing something odd with my Cisco ASA, for some reason the ports summary graph isn’t working. What is odd is that each of the individual interfaces are working fine. It looks like there is something wrong with the RRD command, how can I fix this? RRDTool Output: ERROR: String ends after the = sign on 'CDEF:inB='
Total time: 0.017 | RRDtool time: 0.015s RRDTool Command rrdtool graph /tmp/WyzPqJz6C3QdevQB.png -g --alt-autoscale --rigid --start 1447085684 --end 1447172084 --width 1159 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DejaVuSansMono' --font AXIS:7:'DejaVuSansMono' --font-render-mode normal -E CDEF:inB= CDEF:outB= CDEF:octets=inB,outB,+ CDEF:doutB=outB,-1,* CDEF:inbits=inB,8,* CDEF:outbits=outB,8,* CDEF:bits=inbits,outbits,+ CDEF:doutbits=doutB,8,* VDEF:95thin=inbits,95,PERCENT VDEF:95thout=outbits,95,PERCENT VDEF:d95thout=doutbits,5,PERCENT VDEF:totin=inB,TOTAL VDEF:avein=inbits,AVERAGE VDEF:totout=outB,TOTAL VDEF:aveout=outbits,AVERAGE VDEF:tot=octets,TOTAL COMMENT:' \l' HRULE:999999999999999#FFFFFF:'Total Rx': GPRINT:inbits:LAST:%6.2lf%s GPRINT:inbits:AVERAGE:%6.2lf%s GPRINT:inbits:MIN:%6.2lf%s GPRINT:inbits:MAX:%6.2lf%s GPRINT:totin:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Tx': GPRINT:outbits:LAST:%6.2lf%s GPRINT:outbits:AVERAGE:%6.2lf%s GPRINT:outbits:MIN:%6.2lf%s GPRINT:outbits:MAX:%6.2lf%s GPRINT:totout:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Agg': GPRINT:bits:LAST:%6.2lf%s GPRINT:bits:AVERAGE:%6.2lf%s GPRINT:bits:MIN:%6.2lf%s GPRINT:bits:MAX:%6.2lf%s GPRINT:tot:%6.2lf%sB COMMENT:'\l' HRULE:0#999999 RRDTool Files Used No RRD information returned. This may be because the graph module doesn't yet return this data.
Ah ok that makes sense.
—jeff
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of Adam Armstrong <adama@memetic.orgmailto:adama@memetic.org> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: Tuesday, November 10, 2015 at 9:56 AM To: "observium@observium.orgmailto:observium@observium.org" <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] ports graphs errors
This is probably because the device doesn't expose any non-virtual interfaces.
The device_bits graph only shows non-virtual interfaces, so if there aren't any, it doesn't draw. I've not seen this issue hit ASAs before though!
adam.
On 10/11/2015 16:25:23, Jeffrey d'Ambly <jeffrey.dambly@jasper.commailto:jeffrey.dambly@jasper.com> wrote:
I’m seeing something odd with my Cisco ASA, for some reason the ports summary graph isn’t working. What is odd is that each of the individual interfaces are working fine. It looks like there is something wrong with the RRD command, how can I fix this? RRDTool Output: ERROR: String ends after the = sign on 'CDEF:inB='
Total time: 0.017 | RRDtool time: 0.015s
RRDTool Command rrdtool graph /tmp/WyzPqJz6C3QdevQB.png -g --alt-autoscale --rigid --start 1447085684 --end 1447172084 --width 1159 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DejaVuSansMono' --font AXIS:7:'DejaVuSansMono' --font-render-mode normal -E CDEF:inB= CDEF:outB= CDEF:octets=inB,outB,+ CDEF:doutB=outB,-1,* CDEF:inbits=inB,8,* CDEF:outbits=outB,8,* CDEF:bits=inbits,outbits,+ CDEF:doutbits=doutB,8,* VDEF:95thin=inbits,95,PERCENT VDEF:95thout=outbits,95,PERCENT VDEF:d95thout=doutbits,5,PERCENT VDEF:totin=inB,TOTAL VDEF:avein=inbits,AVERAGE VDEF:totout=outB,TOTAL VDEF:aveout=outbits,AVERAGE VDEF:tot=octets,TOTAL COMMENT:' \l' HRULE:999999999999999#FFFFFF:'Total Rx': GPRINT:inbits:LAST:%6.2lf%s GPRINT:inbits:AVERAGE:%6.2lf%s GPRINT:inbits:MIN:%6.2lf%s GPRINT:inbits:MAX:%6.2lf%s GPRINT:totin:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Tx': GPRINT:outbits:LAST:%6.2lf%s GPRINT:outbits:AVERAGE:%6.2lf%s GPRINT:outbits:MIN:%6.2lf%s GPRINT:outbits:MAX:%6.2lf%s GPRINT:totout:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Agg': GPRINT:bits:LAST:%6.2lf%s GPRINT:bits:AVERAGE:%6.2lf%s GPRINT:bits:MIN:%6.2lf%s GPRINT:bits:MAX:%6.2lf%s GPRINT:tot:%6.2lf%sB COMMENT:'\l' HRULE:0#999999 RRDTool Files Used No RRD information returned. This may be because the graph module doesn't yet return this data.
participants (2)
-
Adam Armstrong -
Jeffrey d'Ambly