Hi all
We have a Netapp storage, and apart from used/free space, we need to monitor used/free inodes, because our applications sometimes generate lots of files and we run out of inodes. Can this item be monitored? This data is published by Netapp using SNMP, so I think this is not parsed or displayed in Observium, is it right? If so, can it be enabled?
Inodes can also be monitored for local filesystems.
Regards.
Este correo electrónico y, en su caso, cualquier fichero anexo al mismo, contiene información de carácter confidencial exclusivamente dirigida a su destinatario o destinatarios. Si no es vd. el destinatario indicado, queda notificado que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. En el caso de haber recibido este correo electrónico por error, se ruega notificar inmediatamente esta circunstancia mediante reenvío a la dirección electrónica del remitente. Evite imprimir este mensaje si no es estrictamente necesario.
This email and any file attached to it (when applicable) contain(s) confidential information that is exclusively addressed to its recipient(s). If you are not the indicated recipient, you are informed that reading, using, disseminating and/or copying it without authorisation is forbidden in accordance with the legislation in effect. If you have received this email by mistake, please immediately notify the sender of the situation by resending it to their email address. Avoid printing this message if it is not absolutely necessary.
Hi all
Any advice on this?
Regards.
El 21/04/15 a las 17:23, Juan Asensio Sánchez escribió:
Hi all
We have a Netapp storage, and apart from used/free space, we need to monitor used/free inodes, because our applications sometimes generate lots of files and we run out of inodes. Can this item be monitored? This data is published by Netapp using SNMP, so I think this is not parsed or displayed in Observium, is it right? If so, can it be enabled?
Inodes can also be monitored for local filesystems.
Regards.
Este correo electrónico y, en su caso, cualquier fichero anexo al mismo, contiene información de carácter confidencial exclusivamente dirigida a su destinatario o destinatarios. Si no es vd. el destinatario indicado, queda notificado que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. En el caso de haber recibido este correo electrónico por error, se ruega notificar inmediatamente esta circunstancia mediante reenvío a la dirección electrónica del remitente. Evite imprimir este mensaje si no es estrictamente necesario.
This email and any file attached to it (when applicable) contain(s) confidential information that is exclusively addressed to its recipient(s). If you are not the indicated recipient, you are informed that reading, using, disseminating and/or copying it without authorisation is forbidden in accordance with the legislation in effect. If you have received this email by mistake, please immediately notify the sender of the situation by resending it to their email address. Avoid printing this message if it is not absolutely necessary.
We don't currently have entity types capable of recording inode usage.
It would probably require re-engineering our storage stuff to allow extra data per filesystem.
As far as I'm aware, none of us have access to Netapps, so we've never had the opportunity to look!
adam.
Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 30/04/2015 16:11:27, Juan Asensio Sánchez jasensios@indra.es wrote: Hi all
Any advice on this?
Regards.
El 21/04/15 a las 17:23, Juan Asensio Sánchez escribió:
Hi all
We have a Netapp storage, and apart from used/free space, we need to monitor used/free inodes, because our applications sometimes generate lots of files and we run out of inodes. Can this item be monitored? This data is published by Netapp using SNMP, so I think this is not parsed or displayed in Observium, is it right? If so, can it be enabled?
Inodes can also be monitored for local filesystems.
Regards.
Este correo electrónico y, en su caso, cualquier fichero anexo al mismo, contiene información de carácter confidencial exclusivamente dirigida a su destinatario o destinatarios. Si no es vd. el destinatario indicado, queda notificado que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. En el caso de haber recibido este correo electrónico por error, se ruega notificar inmediatamente esta circunstancia mediante reenvío a la dirección electrónica del remitente. Evite imprimir este mensaje si no es estrictamente necesario.
This email and any file attached to it (when applicable) contain(s) confidential information that is exclusively addressed to its recipient(s). If you are not the indicated recipient, you are informed that reading, using, disseminating and/or copying it without authorisation is forbidden in accordance with the legislation in effect. If you have received this email by mistake, please immediately notify the sender of the situation by resending it to their email address. Avoid printing this message if it is not absolutely necessary. _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
You need access to a netapp?
From: Adam Armstrong <adama@memetic.orgmailto:adama@memetic.org> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: Thursday, April 30, 2015 at 5:36 PM To: "observium@observium.orgmailto:observium@observium.org" <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] inodes monitoring
We don't currently have entity types capable of recording inode usage.
It would probably require re-engineering our storage stuff to allow extra data per filesystem.
As far as I'm aware, none of us have access to Netapps, so we've never had the opportunity to look!
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 30/04/2015 16:11:27, Juan Asensio Sánchez <jasensios@indra.esmailto:jasensios@indra.es> wrote:
Hi all
Any advice on this?
Regards.
El 21/04/15 a las 17:23, Juan Asensio Sánchez escribió:
Hi all
We have a Netapp storage, and apart from used/free space, we need to monitor used/free inodes, because our applications sometimes generate lots of files and we run out of inodes. Can this item be monitored? This data is published by Netapp using SNMP, so I think this is not parsed or displayed in Observium, is it right? If so, can it be enabled?
Inodes can also be monitored for local filesystems.
Regards.
Este correo electrónico y, en su caso, cualquier fichero anexo al mismo, contiene información de carácter confidencial exclusivamente dirigida a su destinatario o destinatarios. Si no es vd. el destinatario indicado, queda notificado que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. En el caso de haber recibido este correo electrónico por error, se ruega notificar inmediatamente esta circunstancia mediante reenvío a la dirección electrónica del remitente. Evite imprimir este mensaje si no es estrictamente necesario.
This email and any file attached to it (when applicable) contain(s) confidential information that is exclusively addressed to its recipient(s). If you are not the indicated recipient, you are informed that reading, using, disseminating and/or copying it without authorisation is forbidden in accordance with the legislation in effect. If you have received this email by mistake, please immediately notify the sender of the situation by resending it to their email address. Avoid printing this message if it is not absolutely necessary. _______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (3)
-
Adam Armstrong -
Juan Asensio Sánchez -
Moerman, Maarten