Hello Markus,
Any news or update on the pastebin output?
Thank you in advance
David Schrok
Van: observium [mailto:observium-bounces@observium.org] Namens Markus Klock Verzonden: maandag 5 september 2016 09:22 Aan: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Onderwerp: Re: [Observium] SNMP MIB Import
Oh, so you get the sensors in Observium but it shows them as wrong type of sensor? Then please attach a screenshot and run polling.php and discovery.php towards this device and use the -d flag for debug. example: ./discovery.php -h mydevice.comhttp://mydevice.com -d save the debug output to a pastebin or similar and give us the link :) /Markus
2016-09-05 9:15 GMT+02:00 David Schrok <dr.schrok@avans.nlmailto:dr.schrok@avans.nl>: Thak you for your reply. If I add a MIB, can it then make a difference between temp and humidity readout?
Now all sensors of the new probe are shown in temperature.
Met vriendelijke groet,
David
Van: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] Namens Markus Klock Verzonden: maandag 5 september 2016 07:52 Aan: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Onderwerp: Re: [Observium] SNMP MIB Import
Hi David,
Sadly just adding a MIB will not add support for a device, a SNMP MIB is only translating OID numbers, nothing more. Observium needs code written to actually support a new device, how much code depends on what kind of sensors you would like to support.
/Markus
2016-09-05 7:37 GMT+02:00 David Schrok <dr.schrok@avans.nlmailto:dr.schrok@avans.nl>: Hello,
Is there a wau to import MIB’s for devices that aren’t supported by Observium yet? I bought a new environment sensor which isn’t recognized by observium. I have the MIB’s, just don’t know how to import, if that is even possible.
Any help?
With Kind Regards,
David Disclaimer ( http://www.avans.nl/over-avans/e-mail-disclaimer )
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Disclaimer ( http://www.avans.nl/over-avans/e-mail-disclaimer )
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Disclaimer ( http://www.avans.nl/over-avans/e-mail-disclaimer )
Hi David, I'm not entirely sure what is wrong but to me it seems your device is reporting it sensor values in a very strange way... Someone from the Observium Dev-team should take a look at this part and hopefully can tell you more:
CMD[ [0;33m/usr/bin/snmpbulkwalk -r '5' -v2c -c *** -Pu -Osqn -M /data/observium/mibs 'udp':'probe_owb_ser_ob':'161' .1.3.6.1.4.1.17095.3 [0m] .1.3.6.1.4.1.17095.3.1.0 "Int. Temp1" .1.3.6.1.4.1.17095.3.2.0 "19.06" .1.3.6.1.4.1.17095.3.3.0 "-" .1.3.6.1.4.1.17095.3.4.0 "-" .1.3.6.1.4.1.17095.3.5.0 "Ext. Temp1" .1.3.6.1.4.1.17095.3.6.0 "21.69" .1.3.6.1.4.1.17095.3.7.0 "-" .1.3.6.1.4.1.17095.3.8.0 "-" .1.3.6.1.4.1.17095.3.9.0 "Humidity1" .1.3.6.1.4.1.17095.3.10.0 "56.19" .1.3.6.1.4.1.17095.3.10.0 "56.19" .1.3.6.1.4.1.17095.3.11.0 "WARNING" .1.3.6.1.4.1.17095.3.12.0 "05 September 2016,14:19:38" .1.3.6.1.4.1.17095.3.13.0 "Dew Point1" .1.3.6.1.4.1.17095.3.14.0 "12.92" .1.3.6.1.4.1.17095.3.15.0 "-" .1.3.6.1.4.1.17095.3.16.0 "-" .1.3.6.1.4.1.17095.3.17.0 "-" .1.3.6.1.4.1.17095.3.18.0 "-" .1.3.6.1.4.1.17095.3.19.0 "-"
2016-09-08 15:10 GMT+02:00 David Schrok dr.schrok@avans.nl:
Hello Markus,
Any news or update on the pastebin output?
Thank you in advance
David Schrok
*Van:* observium [mailto:observium-bounces@observium.org observium-bounces@observium.org] *Namens *Markus Klock *Verzonden:* maandag 5 september 2016 09:22 *Aan:* Observium Network Observation System observium@observium.org *Onderwerp:* Re: [Observium] SNMP MIB Import
Oh, so you get the sensors in Observium but it shows them as wrong type of sensor?
Then please attach a screenshot and run polling.php and discovery.php towards this device and use the -d flag for debug.
example: ./discovery.php -h mydevice.com -d
save the debug output to a pastebin or similar and give us the link :)
/Markus
2016-09-05 9:15 GMT+02:00 David Schrok dr.schrok@avans.nl:
Thak you for your reply.
If I add a MIB, can it then make a difference between temp and humidity readout?
Now all sensors of the new probe are shown in temperature.
Met vriendelijke groet,
David
*Van:* observium [mailto:observium-bounces@observium.org] *Namens *Markus Klock
*Verzonden:* maandag 5 september 2016 07:52 *Aan:* Observium Network Observation System observium@observium.org *Onderwerp:* Re: [Observium] SNMP MIB Import
Hi David,
Sadly just adding a MIB will not add support for a device, a SNMP MIB is only translating OID numbers, nothing more.
Observium needs code written to actually support a new device, how much code depends on what kind of sensors you would like to support.
/Markus
2016-09-05 7:37 GMT+02:00 David Schrok dr.schrok@avans.nl:
Hello,
Is there a wau to import MIB’s for devices that aren’t supported by Observium yet?
I bought a new environment sensor which isn’t recognized by observium. I have the MIB’s, just don’t know how to import, if that is even possible.
Any help?
With Kind Regards,
David
Disclaimer ( http://www.avans.nl/over-avans/e-mail-disclaimer )
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Disclaimer ( http://www.avans.nl/over-avans/e-mail-disclaimer )
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Disclaimer ( http://www.avans.nl/over-avans/e-mail-disclaimer )
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (2)
-
David Schrok -
Markus Klock