As the subject says we've recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
ALERT
Modifyhttp://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
Alert
Utilization has exceeded 80%
Entity
tengigabitethernet1/0/1http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
Conditions
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
Metrics
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
Duration
3 days, 1h 13m 43s (2015-09-28 13:43:41)
Device
Device
bne-be-l2r16-sw10ghttp://cacti.bettacomputers.com.au/device/device=99/
Hardware
Operating System
Generic Device
Location
Uptime
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 )
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D1000F.A5564960]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.
Hmm.
Returning "10" for ifSpeed is strange behaviour, and the cause of this bug.
I'm not sure how one should handle that! Perhaps via an OS-specific knob.
adam.
Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 05/10/2015 23:19:25, Cameron Murray cameron@techpath.com.au wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps. ALERT Modify [http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=58...] Alert Utilization has exceeded 80% Entity tengigabitethernet1/0/1 [http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/] Conditions ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740) Metrics ifInOctets_perc = 623770 ifOutOctets_perc = 631740 Duration 3 days, 1h 13m 43s (2015-09-28 13:43:41) Device Device bne-be-l2r16-sw10g [http://cacti.bettacomputers.com.au/device/device=99/] Hardware Operating System Generic Device Location Uptime 3 days, 3h 46m 24s The ports that are trained up as 1gbps show correctly however higher do not. Port Data: port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 ) Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click here [http://www.techpath.com.au/contact-us/feedback/] to rate my work. [http://www.techpath.com.au/]
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.au [http://www.techpath.com.au]
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook] [http://www.facebook.com/techpathau] [Twitter] [http://twitter.com/techpathau] [LinkedIn] [http://www.linkedin.com/company/techpathau] Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.
It is a very new Dell switch – Possible MIB set is different?
What details would you need to correct?
The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10010.65ABCE10]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:21 AM To: observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
Hmm.
Returning "10" for ifSpeed is strange behaviour, and the cause of this bug.
I'm not sure how one should handle that! Perhaps via an OS-specific knob.
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
ALERT
Modifyhttp://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
Alert
Utilization has exceeded 80%
Entity
tengigabitethernet1/0/1http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
Conditions
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
Metrics
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
Duration
3 days, 1h 13m 43s (2015-09-28 13:43:41)
Device
Device
bne-be-l2r16-sw10ghttp://cacti.bettacomputers.com.au/device/device=99/
Hardware
Operating System
Generic Device
Location
Uptime
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 )
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D1000F.A5564960]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.
Have you tried a newer firmware?
-- Eduardo Schoedler
2015-10-05 19:24 GMT-03:00 Cameron Murray cameron@techpath.com.au:
It is a very new Dell switch – Possible MIB set is different?
What details would you need to correct?
The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd
Regards,
*Cameron Murray* Remote Support Engineer
*From:* observium [mailto:observium-bounces@observium.org] *On Behalf Of *Adam Armstrong *Sent:* Tuesday, 6 October 2015 8:21 AM *To:* observium@observium.org *Subject:* Re: [Observium] 10gbps port showing as 10bps
Hmm.
Returning "10" for ifSpeed is strange behaviour, and the cause of this bug.
I'm not sure how one should handle that! Perhaps via an OS-specific knob.
adam.
Sent from Mailbird http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:19:25, Cameron Murray cameron@techpath.com.au wrote:
As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
*ALERT*
Modify http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
*Alert*
Utilization has exceeded 80%
*Entity*
tengigabitethernet1/0/1 http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
*Conditions*
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
*Metrics*
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
*Duration*
3 days, 1h 13m 43s (2015-09-28 13:43:41)
*Device*
*Device*
bne-be-l2r16-sw10g http://cacti.bettacomputers.com.au/device/device=99/
*Hardware*
*Operating System*
Generic Device
*Location*
*Uptime*
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260
device_id => 99
port_64bit => 1
port_label => tengigabitethernet1/0/1
port_label_base => null
port_label_num => null
port_label_short => Te1/0/1
port_descr_type => null
port_descr_descr => null
port_descr_circuit => null
port_descr_speed => null
port_descr_notes => null
ifDescr => tengigabitethernet1/0/1
ifName => te1/0/1
portName => null
ifIndex => 1
ifSpeed => 10
ifConnectorPresent => true
ifPromiscuousMode => true
ifHighSpeed => 10000
ifOperStatus => up
ifAdminStatus => up
ifDuplex => fullDuplex
ifMtu => 1500
ifType => ethernetCsmacd
ifAlias =>
ifPhysAddress => f8b15686e676
ifHardType => null
ifLastChange => 2015-09-28 11:37:54
date-7da Australia/Brisbane (UTC+10)
ifVlan => 1
ifTrunk => dot1Q
ifVrf => null
ignore => 0
disabled => 0
detailed => 0
deleted => 0
pagpOperationMode => null
pagpPortState => null
pagpPartnerDeviceId => null
pagpPartnerLearnMethod => null
pagpPartnerIfIndex => null
pagpPartnerGroupIfIndex => null
pagpPartnerDeviceName => null
pagpEthcOperationMode => null
pagpDeviceId => null
pagpGroupIfIndex => null
ifInUcastPkts => 0
ifInUcastPkts_delta => 0
ifInUcastPkts_rate => 0
ifOutUcastPkts => 0
ifOutUcastPkts_delta => 0
ifOutUcastPkts_rate => 0
ifInErrors => 0
ifInErrors_delta => 0
ifInErrors_rate => 0
ifOutErrors => 0
ifOutErrors_delta => 0
ifOutErrors_rate => 0
ifOctets_rate => 199209
ifUcastPkts_rate => 0
ifErrors_rate => 0
ifInOctets => 30302781555
ifInOctets_delta => 46292430
ifInOctets_rate => 152780
ifOutOctets => 15509016948
ifOutOctets_delta => 14067927
ifOutOctets_rate => 46429
ifInOctets_perc => 255
ifOutOctets_perc => 255
poll_time => 1444083140
poll_period => 303
)
Regards,
*Cameron Murray* Remote Support Engineer
Switch is running the newest release.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10011.1ABE7AF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler Sent: Tuesday, 6 October 2015 8:27 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Have you tried a newer firmware?
-- Eduardo Schoedler
2015-10-05 19:24 GMT-03:00 Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au>: It is a very new Dell switch – Possible MIB set is different?
What details would you need to correct?
The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd Regards,
Cameron Murray Remote Support Engineer
From: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:21 AM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
Hmm.
Returning "10" for ifSpeed is strange behaviour, and the cause of this bug.
I'm not sure how one should handle that! Perhaps via an OS-specific knob.
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
ALERT
Modifyhttp://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
Alert
Utilization has exceeded 80%
Entity
tengigabitethernet1/0/1http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
Conditions
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
Metrics
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
Duration
3 days, 1h 13m 43s (2015-09-28 13:43:41)
Device
Device
bne-be-l2r16-sw10ghttp://cacti.bettacomputers.com.au/device/device=99/
Hardware
Operating System
Generic Device
Location
Uptime
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 )
Regards,
Cameron Murray Remote Support Engineer
Silly statement but is there such a port as 10bps? Can we adjust the config for this if 10bps then 10gbps.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10013.65D8A310]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Switch is running the newest release.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10013.65D8A310]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler Sent: Tuesday, 6 October 2015 8:27 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Have you tried a newer firmware?
-- Eduardo Schoedler
2015-10-05 19:24 GMT-03:00 Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au>: It is a very new Dell switch – Possible MIB set is different?
What details would you need to correct?
The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd Regards,
Cameron Murray Remote Support Engineer
From: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:21 AM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
Hmm.
Returning "10" for ifSpeed is strange behaviour, and the cause of this bug.
I'm not sure how one should handle that! Perhaps via an OS-specific knob.
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
ALERT
Modifyhttp://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
Alert
Utilization has exceeded 80%
Entity
tengigabitethernet1/0/1http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
Conditions
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
Metrics
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
Duration
3 days, 1h 13m 43s (2015-09-28 13:43:41)
Device
Device
bne-be-l2r16-sw10ghttp://cacti.bettacomputers.com.au/device/device=99/
Hardware
Operating System
Generic Device
Location
Uptime
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 )
Regards,
Cameron Murray Remote Support Engineer
From the Manual - RFC 3416 — Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:46 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Silly statement but is there such a port as 10bps? Can we adjust the config for this if 10bps then 10gbps.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Switch is running the newest release.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler Sent: Tuesday, 6 October 2015 8:27 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Have you tried a newer firmware?
-- Eduardo Schoedler
2015-10-05 19:24 GMT-03:00 Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au>: It is a very new Dell switch – Possible MIB set is different?
What details would you need to correct?
The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd Regards,
Cameron Murray Remote Support Engineer
From: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:21 AM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
Hmm.
Returning "10" for ifSpeed is strange behaviour, and the cause of this bug.
I'm not sure how one should handle that! Perhaps via an OS-specific knob.
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
ALERT
Modifyhttp://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
Alert
Utilization has exceeded 80%
Entity
tengigabitethernet1/0/1http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
Conditions
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
Metrics
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
Duration
3 days, 1h 13m 43s (2015-09-28 13:43:41)
Device
Device
bne-be-l2r16-sw10ghttp://cacti.bettacomputers.com.au/device/device=99/
Hardware
Operating System
Generic Device
Location
Uptime
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 )
Regards,
Cameron Murray Remote Support Engineer
Lol. Look up that RFC, it isn't helpful here :P
adam.
Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 05/10/2015 23:52:32, Cameron Murray cameron@techpath.com.au wrote: From the Manual - RFC 3416 — Management Information Base (MIB) for the Simple Network Management Protocol (SNMP) Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click here [http://www.techpath.com.au/contact-us/feedback/] to rate my work. [http://www.techpath.com.au/]
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.au [http://www.techpath.com.au]
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook] [http://www.facebook.com/techpathau] [Twitter] [http://twitter.com/techpathau] [LinkedIn] [http://www.linkedin.com/company/techpathau] Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:46 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps Silly statement but is there such a port as 10bps? Can we adjust the config for this if 10bps then 10gbps. Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click here [http://www.techpath.com.au/contact-us/feedback/] to rate my work. [http://www.techpath.com.au/]
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.au [http://www.techpath.com.au]
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook] [http://www.facebook.com/techpathau] [Twitter] [http://twitter.com/techpathau] [LinkedIn] [http://www.linkedin.com/company/techpathau] Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps Switch is running the newest release. Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click here [http://www.techpath.com.au/contact-us/feedback/] to rate my work. [http://www.techpath.com.au/]
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.au [http://www.techpath.com.au]
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook] [http://www.facebook.com/techpathau] [Twitter] [http://twitter.com/techpathau] [LinkedIn] [http://www.linkedin.com/company/techpathau] Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler Sent: Tuesday, 6 October 2015 8:27 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps Have you tried a newer firmware? -- Eduardo Schoedler 2015-10-05 19:24 GMT-03:00 Cameron Murray <cameron@techpath.com.au [mailto:cameron@techpath.com.au]>: It is a very new Dell switch – Possible MIB set is different? What details would you need to correct? The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd [http://www.dell.com/au/business/p/networking-x-series/pd] Regards,
Cameron Murray Remote Support Engineer From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:21 AM To: observium@observium.org [mailto:observium@observium.org] Subject: Re: [Observium] 10gbps port showing as 10bps Hmm. Returning "10" for ifSpeed is strange behaviour, and the cause of this bug. I'm not sure how one should handle that! Perhaps via an OS-specific knob. adam. Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.au [mailto:cameron@techpath.com.au]> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps. ALERT Modify [http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=58...] Alert Utilization has exceeded 80% Entity tengigabitethernet1/0/1 [http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/] Conditions ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740) Metrics ifInOctets_perc = 623770 ifOutOctets_perc = 631740 Duration 3 days, 1h 13m 43s (2015-09-28 13:43:41) Device Device bne-be-l2r16-sw10g [http://cacti.bettacomputers.com.au/device/device=99/] Hardware Operating System Generic Device Location Uptime 3 days, 3h 46m 24s The ports that are trained up as 1gbps show correctly however higher do not. Port Data: port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 ) Regards,
Cameron Murray Remote Support Engineer
There's a fix for this in SVN now. I've added code to use ifHighSpeed if ifHighSpeed is greater than ifSpeed (as it is in this case, and should never been in cases where ifSpeed is correct)
adam.
Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 05/10/2015 23:54:22, Adam Armstrong adama@memetic.org wrote: Lol. Look up that RFC, it isn't helpful here :P
adam.
Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 05/10/2015 23:52:32, Cameron Murray cameron@techpath.com.au wrote: From the Manual - RFC 3416 — Management Information Base (MIB) for the Simple Network Management Protocol (SNMP) Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click here [http://www.techpath.com.au/contact-us/feedback/] to rate my work. [http://www.techpath.com.au/]
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.au [http://www.techpath.com.au]
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook] [http://www.facebook.com/techpathau] [Twitter] [http://twitter.com/techpathau] [LinkedIn] [http://www.linkedin.com/company/techpathau] Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:46 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps Silly statement but is there such a port as 10bps? Can we adjust the config for this if 10bps then 10gbps. Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click here [http://www.techpath.com.au/contact-us/feedback/] to rate my work. [http://www.techpath.com.au/]
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.au [http://www.techpath.com.au]
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook] [http://www.facebook.com/techpathau] [Twitter] [http://twitter.com/techpathau] [LinkedIn] [http://www.linkedin.com/company/techpathau] Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps Switch is running the newest release. Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click here [http://www.techpath.com.au/contact-us/feedback/] to rate my work. [http://www.techpath.com.au/]
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.au [http://www.techpath.com.au]
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook] [http://www.facebook.com/techpathau] [Twitter] [http://twitter.com/techpathau] [LinkedIn] [http://www.linkedin.com/company/techpathau] Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler Sent: Tuesday, 6 October 2015 8:27 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps Have you tried a newer firmware? -- Eduardo Schoedler 2015-10-05 19:24 GMT-03:00 Cameron Murray <cameron@techpath.com.au [mailto:cameron@techpath.com.au]>: It is a very new Dell switch – Possible MIB set is different? What details would you need to correct? The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd [http://www.dell.com/au/business/p/networking-x-series/pd] Regards,
Cameron Murray Remote Support Engineer From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:21 AM To: observium@observium.org [mailto:observium@observium.org] Subject: Re: [Observium] 10gbps port showing as 10bps Hmm. Returning "10" for ifSpeed is strange behaviour, and the cause of this bug. I'm not sure how one should handle that! Perhaps via an OS-specific knob. adam. Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.au [mailto:cameron@techpath.com.au]> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps. ALERT Modify [http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=58...] Alert Utilization has exceeded 80% Entity tengigabitethernet1/0/1 [http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/] Conditions ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740) Metrics ifInOctets_perc = 623770 ifOutOctets_perc = 631740 Duration 3 days, 1h 13m 43s (2015-09-28 13:43:41) Device Device bne-be-l2r16-sw10g [http://cacti.bettacomputers.com.au/device/device=99/] Hardware Operating System Generic Device Location Uptime 3 days, 3h 46m 24s The ports that are trained up as 1gbps show correctly however higher do not. Port Data: port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 ) Regards,
Cameron Murray Remote Support Engineer
Righto – I’ll check it out.
[root@cacti observium]# svn update svn: OPTIONS of 'http://svn.observium.org/svn/observium/trunk': 200 OK (http://svn.observium.org)
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10015.9B1FC9C0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:57 AM To: observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
There's a fix for this in SVN now. I've added code to use ifHighSpeed if ifHighSpeed is greater than ifSpeed (as it is in this case, and should never been in cases where ifSpeed is correct)
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:54:22, Adam Armstrong <adama@memetic.orgmailto:adama@memetic.org> wrote: Lol. Look up that RFC, it isn't helpful here :P
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:52:32, Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au> wrote: From the Manual - RFC 3416 — Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:46 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Silly statement but is there such a port as 10bps? Can we adjust the config for this if 10bps then 10gbps.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Switch is running the newest release.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler Sent: Tuesday, 6 October 2015 8:27 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Have you tried a newer firmware?
-- Eduardo Schoedler
2015-10-05 19:24 GMT-03:00 Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au>: It is a very new Dell switch – Possible MIB set is different?
What details would you need to correct?
The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd Regards,
Cameron Murray Remote Support Engineer
From: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:21 AM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
Hmm.
Returning "10" for ifSpeed is strange behaviour, and the cause of this bug.
I'm not sure how one should handle that! Perhaps via an OS-specific knob.
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
ALERT
Modifyhttp://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
Alert
Utilization has exceeded 80%
Entity
tengigabitethernet1/0/1http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
Conditions
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
Metrics
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
Duration
3 days, 1h 13m 43s (2015-09-28 13:43:41)
Device
Device
bne-be-l2r16-sw10ghttp://cacti.bettacomputers.com.au/device/device=99/
Hardware
Operating System
Generic Device
Location
Uptime
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 )
Regards,
Cameron Murray Remote Support Engineer
Hi adam,
Still showing as 10bps – Have updated, Discovered and polled.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10017.3E4E6D30]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:57 AM To: observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
There's a fix for this in SVN now. I've added code to use ifHighSpeed if ifHighSpeed is greater than ifSpeed (as it is in this case, and should never been in cases where ifSpeed is correct)
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:54:22, Adam Armstrong adama@memetic.org wrote: Lol. Look up that RFC, it isn't helpful here :P
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:52:32, Cameron Murray cameron@techpath.com.au wrote: From the Manual - RFC 3416 — Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:46 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Silly statement but is there such a port as 10bps? Can we adjust the config for this if 10bps then 10gbps.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Switch is running the newest release.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler Sent: Tuesday, 6 October 2015 8:27 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Have you tried a newer firmware?
-- Eduardo Schoedler
2015-10-05 19:24 GMT-03:00 Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au>: It is a very new Dell switch – Possible MIB set is different?
What details would you need to correct?
The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd Regards,
Cameron Murray Remote Support Engineer
From: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:21 AM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
Hmm.
Returning "10" for ifSpeed is strange behaviour, and the cause of this bug.
I'm not sure how one should handle that! Perhaps via an OS-specific knob.
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
ALERT
Modifyhttp://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
Alert
Utilization has exceeded 80%
Entity
tengigabitethernet1/0/1http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
Conditions
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
Metrics
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
Duration
3 days, 1h 13m 43s (2015-09-28 13:43:41)
Device
Device
bne-be-l2r16-sw10ghttp://cacti.bettacomputers.com.au/device/device=99/
Hardware
Operating System
Generic Device
Location
Uptime
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 )
Regards,
Cameron Murray Remote Support Engineer
On 06.10.15 2:13, Cameron Murray wrote:
Hi adam,
Still showing as 10bps – Have updated, Discovered and polled.
Pls send debug output: ./poller.php -d -m ports -h <this_device>
Also note, this updated only in trunk (rolling) repo, stable not yet updated.
Regards,
*Cameron Murray* Remote Support Engineer
How am I doing? Please click here http://www.techpath.com.au/contact-us/feedback/ to rate my work.
*P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au
*www.techpath.com.au http://www.techpath.com.au*
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd
Facebook http://www.facebook.com/techpathau
Twitter http://twitter.com/techpathau
LinkedIn http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.
*From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Adam Armstrong *Sent:* Tuesday, 6 October 2015 8:57 AM *To:* observium@observium.org *Subject:* Re: [Observium] 10gbps port showing as 10bps
There's a fix for this in SVN now. I've added code to use ifHighSpeed if ifHighSpeed is greater than ifSpeed (as it is in this case, and should never been in cases where ifSpeed is correct)
adam.
Sent from Mailbird http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:54:22, Adam Armstrong <adama@memetic.org> wrote: Lol. Look up that RFC, it isn't helpful here :P adam. Sent from Mailbird <http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird> On 05/10/2015 23:52:32, Cameron Murray <cameron@techpath.com.au> wrote: From the Manual - RFC 3416 — Management Information Base (MIB) for the Simple Network Management Protocol (SNMP) Regards, *Cameron Murray* Remote Support Engineer How am I doing? Please click here <http://www.techpath.com.au/contact-us/feedback/> to rate my work. <http://www.techpath.com.au/> *P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au *www.techpath.com.au <http://www.techpath.com.au>* Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd Facebook <http://www.facebook.com/techpathau> Twitter <http://twitter.com/techpathau> LinkedIn <http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. *From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Cameron Murray *Sent:* Tuesday, 6 October 2015 8:46 AM *To:* Observium Network Observation System *Subject:* Re: [Observium] 10gbps port showing as 10bps Silly statement but is there such a port as 10bps? Can we adjust the config for this if 10bps then 10gbps. Regards, *Cameron Murray* Remote Support Engineer How am I doing? Please click here <http://www.techpath.com.au/contact-us/feedback/> to rate my work. <http://www.techpath.com.au/> *P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au *www.techpath.com.au <http://www.techpath.com.au>* Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd Facebook <http://www.facebook.com/techpathau> Twitter <http://twitter.com/techpathau> LinkedIn <http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. *From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Cameron Murray *Sent:* Tuesday, 6 October 2015 8:29 AM *To:* Observium Network Observation System *Subject:* Re: [Observium] 10gbps port showing as 10bps Switch is running the newest release. Regards, *Cameron Murray* Remote Support Engineer How am I doing? Please click here <http://www.techpath.com.au/contact-us/feedback/> to rate my work. <http://www.techpath.com.au/> *P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au *www.techpath.com.au <http://www.techpath.com.au>* Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd Facebook <http://www.facebook.com/techpathau> Twitter <http://twitter.com/techpathau> LinkedIn <http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. *From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Eduardo Schoedler *Sent:* Tuesday, 6 October 2015 8:27 AM *To:* Observium Network Observation System *Subject:* Re: [Observium] 10gbps port showing as 10bps Have you tried a newer firmware? -- Eduardo Schoedler 2015-10-05 19:24 GMT-03:00 Cameron Murray <cameron@techpath.com.au <mailto:cameron@techpath.com.au>>: It is a very new Dell switch – Possible MIB set is different? What details would you need to correct? The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd Regards, *Cameron Murray* Remote Support Engineer *From:*observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] *On Behalf Of *Adam Armstrong *Sent:* Tuesday, 6 October 2015 8:21 AM *To:* observium@observium.org <mailto:observium@observium.org> *Subject:* Re: [Observium] 10gbps port showing as 10bps Hmm. Returning "10" for ifSpeed is strange behaviour, and the cause of this bug. I'm not sure how one should handle that! Perhaps via an OS-specific knob. adam. Sent from Mailbird <http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird> On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.au <mailto:cameron@techpath.com.au>> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps. *ALERT* Modify <http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/> *Alert* Utilization has exceeded 80% *Entity* tengigabitethernet1/0/1 <http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/> *Conditions* ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740) *Metrics* ifInOctets_perc = 623770 ifOutOctets_perc = 631740 *Duration* 3 days, 1h 13m 43s (2015-09-28 13:43:41) *Device* *Device* bne-be-l2r16-sw10g <http://cacti.bettacomputers.com.au/device/device=99/> *Hardware* *Operating System* Generic Device *Location* *Uptime* 3 days, 3h 46m 24s The ports that are trained up as 1gbps show correctly however higher do not. Port Data: port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 ) Regards, *Cameron Murray* Remote Support Engineer
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Mike,
The output of the requested command: https://dl.dropboxusercontent.com/u/8790688/log.txt
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D100EC.C642BF40]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mike Stupalov Sent: Tuesday, 6 October 2015 11:18 PM To: observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
On 06.10.15 2:13, Cameron Murray wrote: Hi adam,
Still showing as 10bps – Have updated, Discovered and polled. Pls send debug output: ./poller.php -d -m ports -h <this_device>
Also note, this updated only in trunk (rolling) repo, stable not yet updated.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D100EC.C642BF40]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:57 AM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
There's a fix for this in SVN now. I've added code to use ifHighSpeed if ifHighSpeed is greater than ifSpeed (as it is in this case, and should never been in cases where ifSpeed is correct)
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:54:22, Adam Armstrong adama@memetic.orgmailto:adama@memetic.org wrote: Lol. Look up that RFC, it isn't helpful here :P
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:52:32, Cameron Murray cameron@techpath.com.aumailto:cameron@techpath.com.au wrote: From the Manual - RFC 3416 — Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:46 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Silly statement but is there such a port as 10bps? Can we adjust the config for this if 10bps then 10gbps.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Switch is running the newest release.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler Sent: Tuesday, 6 October 2015 8:27 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Have you tried a newer firmware?
-- Eduardo Schoedler
2015-10-05 19:24 GMT-03:00 Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au>: It is a very new Dell switch – Possible MIB set is different?
What details would you need to correct?
The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd Regards,
Cameron Murray Remote Support Engineer
From: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:21 AM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
Hmm.
Returning "10" for ifSpeed is strange behaviour, and the cause of this bug.
I'm not sure how one should handle that! Perhaps via an OS-specific knob.
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
ALERT
Modifyhttp://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
Alert
Utilization has exceeded 80%
Entity
tengigabitethernet1/0/1http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
Conditions
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
Metrics
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
Duration
3 days, 1h 13m 43s (2015-09-28 13:43:41)
Device
Device
bne-be-l2r16-sw10ghttp://cacti.bettacomputers.com.au/device/device=99/
Hardware
Operating System
Generic Device
Location
Uptime
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 )
Regards,
Cameron Murray Remote Support Engineer
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
Hi,
I see you use too old observium revision. Update your install to latest, this should fix issue.
cd /opt/observium svn up ./discovery.php -u
On 07.10.15 3:41, Cameron Murray wrote:
Mike,
The output of the requested command: https://dl.dropboxusercontent.com/u/8790688/log.txt
Regards,
*Cameron Murray* Remote Support Engineer
How am I doing? Please click here http://www.techpath.com.au/contact-us/feedback/ to rate my work.
*P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au
*www.techpath.com.au http://www.techpath.com.au*
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd
Facebook http://www.facebook.com/techpathau
Twitter http://twitter.com/techpathau
LinkedIn http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.
*From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Mike Stupalov *Sent:* Tuesday, 6 October 2015 11:18 PM *To:* observium@observium.org *Subject:* Re: [Observium] 10gbps port showing as 10bps
On 06.10.15 2:13, Cameron Murray wrote:
Hi adam, Still showing as 10bps – Have updated, Discovered and polled.Pls send debug output: ./poller.php -d -m ports -h <this_device>
Also note, this updated only in trunk (rolling) repo, stable not yetupdated.
Regards, *Cameron Murray* Remote Support Engineer How am I doing? Please click here <http://www.techpath.com.au/contact-us/feedback/> to rate my work. <http://www.techpath.com.au/> *P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au <mailto:cameron@techpath.com.au> *www.techpath.com.au <http://www.techpath.com.au>* Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd Facebook <http://www.facebook.com/techpathau> Twitter <http://twitter.com/techpathau> LinkedIn <http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. *From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Adam Armstrong *Sent:* Tuesday, 6 October 2015 8:57 AM *To:* observium@observium.org <mailto:observium@observium.org> *Subject:* Re: [Observium] 10gbps port showing as 10bps There's a fix for this in SVN now. I've added code to use ifHighSpeed if ifHighSpeed is greater than ifSpeed (as it is in this case, and should never been in cases where ifSpeed is correct) adam. Sent from Mailbird <http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird> On 05/10/2015 23:54:22, Adam Armstrong <adama@memetic.org> <mailto:adama@memetic.org> wrote: Lol. Look up that RFC, it isn't helpful here :P adam. Sent from Mailbird <http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird> On 05/10/2015 23:52:32, Cameron Murray <cameron@techpath.com.au> <mailto:cameron@techpath.com.au> wrote: From the Manual - RFC 3416 — Management Information Base (MIB) for the Simple Network Management Protocol (SNMP) Regards, *Cameron Murray* Remote Support Engineer How am I doing? Please click here <http://www.techpath.com.au/contact-us/feedback/> to rate my work. <http://www.techpath.com.au/> *P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au <mailto:cameron@techpath.com.au> *www.techpath.com.au <http://www.techpath.com.au>* Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd Facebook <http://www.facebook.com/techpathau> Twitter <http://twitter.com/techpathau> LinkedIn <http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. *From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Cameron Murray *Sent:* Tuesday, 6 October 2015 8:46 AM *To:* Observium Network Observation System *Subject:* Re: [Observium] 10gbps port showing as 10bps Silly statement but is there such a port as 10bps? Can we adjust the config for this if 10bps then 10gbps. Regards, *Cameron Murray* Remote Support Engineer How am I doing? Please click here <http://www.techpath.com.au/contact-us/feedback/> to rate my work. <http://www.techpath.com.au/> *P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au <mailto:cameron@techpath.com.au> *www.techpath.com.au <http://www.techpath.com.au>* Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd Facebook <http://www.facebook.com/techpathau> Twitter <http://twitter.com/techpathau> LinkedIn <http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. *From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Cameron Murray *Sent:* Tuesday, 6 October 2015 8:29 AM *To:* Observium Network Observation System *Subject:* Re: [Observium] 10gbps port showing as 10bps Switch is running the newest release. Regards, *Cameron Murray* Remote Support Engineer How am I doing? Please click here <http://www.techpath.com.au/contact-us/feedback/> to rate my work. <http://www.techpath.com.au/> *P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au <mailto:cameron@techpath.com.au> *www.techpath.com.au <http://www.techpath.com.au>* Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd Facebook <http://www.facebook.com/techpathau> Twitter <http://twitter.com/techpathau> LinkedIn <http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. *From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Eduardo Schoedler *Sent:* Tuesday, 6 October 2015 8:27 AM *To:* Observium Network Observation System *Subject:* Re: [Observium] 10gbps port showing as 10bps Have you tried a newer firmware? -- Eduardo Schoedler 2015-10-05 19:24 GMT-03:00 Cameron Murray <cameron@techpath.com.au <mailto:cameron@techpath.com.au>>: It is a very new Dell switch – Possible MIB set is different? What details would you need to correct? The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd Regards, *Cameron Murray* Remote Support Engineer *From:*observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] *On Behalf Of *Adam Armstrong *Sent:* Tuesday, 6 October 2015 8:21 AM *To:* observium@observium.org <mailto:observium@observium.org> *Subject:* Re: [Observium] 10gbps port showing as 10bps Hmm. Returning "10" for ifSpeed is strange behaviour, and the cause of this bug. I'm not sure how one should handle that! Perhaps via an OS-specific knob. adam. Sent from Mailbird <http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird> On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.au <mailto:cameron@techpath.com.au>> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps. *ALERT* Modify <http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/> *Alert* Utilization has exceeded 80% *Entity* tengigabitethernet1/0/1 <http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/> *Conditions* ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740) *Metrics* ifInOctets_perc = 623770 ifOutOctets_perc = 631740 *Duration* 3 days, 1h 13m 43s (2015-09-28 13:43:41) *Device* *Device* bne-be-l2r16-sw10g <http://cacti.bettacomputers.com.au/device/device=99/> *Hardware* *Operating System* Generic Device *Location* *Uptime* 3 days, 3h 46m 24s The ports that are trained up as 1gbps show correctly however higher do not. Port Data: port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 ) Regards, *Cameron Murray* Remote Support Engineer _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium-- Mike Stupalov http://observium.org
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I’ve done all this and the ports still remain at 10bps
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D104D1.0ECF7D10]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mike Stupalov Sent: Wednesday, 7 October 2015 7:42 PM To: observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
Hi,
I see you use too old observium revision. Update your install to latest, this should fix issue.
cd /opt/observium svn up ./discovery.php -u
On 07.10.15 3:41, Cameron Murray wrote: Mike,
The output of the requested command: https://dl.dropboxusercontent.com/u/8790688/log.txt
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D104D1.0ECF7D10]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mike Stupalov Sent: Tuesday, 6 October 2015 11:18 PM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
On 06.10.15 2:13, Cameron Murray wrote: Hi adam,
Still showing as 10bps – Have updated, Discovered and polled. Pls send debug output: ./poller.php -d -m ports -h <this_device>
Also note, this updated only in trunk (rolling) repo, stable not yet updated.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D104D1.0ECF7D10]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:57 AM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
There's a fix for this in SVN now. I've added code to use ifHighSpeed if ifHighSpeed is greater than ifSpeed (as it is in this case, and should never been in cases where ifSpeed is correct)
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:54:22, Adam Armstrong adama@memetic.orgmailto:adama@memetic.org wrote: Lol. Look up that RFC, it isn't helpful here :P
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:52:32, Cameron Murray cameron@techpath.com.aumailto:cameron@techpath.com.au wrote: From the Manual - RFC 3416 — Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:46 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Silly statement but is there such a port as 10bps? Can we adjust the config for this if 10bps then 10gbps.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Switch is running the newest release.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler Sent: Tuesday, 6 October 2015 8:27 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Have you tried a newer firmware?
-- Eduardo Schoedler
2015-10-05 19:24 GMT-03:00 Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au>: It is a very new Dell switch – Possible MIB set is different?
What details would you need to correct?
The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd Regards,
Cameron Murray Remote Support Engineer
From: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:21 AM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
Hmm.
Returning "10" for ifSpeed is strange behaviour, and the cause of this bug.
I'm not sure how one should handle that! Perhaps via an OS-specific knob.
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
ALERT
Modifyhttp://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
Alert
Utilization has exceeded 80%
Entity
tengigabitethernet1/0/1http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
Conditions
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
Metrics
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
Duration
3 days, 1h 13m 43s (2015-09-28 13:43:41)
Device
Device
bne-be-l2r16-sw10ghttp://cacti.bettacomputers.com.au/device/device=99/
Hardware
Operating System
Generic Device
Location
Uptime
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 )
Regards,
Cameron Murray Remote Support Engineer
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
I Stand corrected – now 10gbps after a cache clear in the browser!
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D104D1.67723930]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Monday, 12 October 2015 9:34 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
I’ve done all this and the ports still remain at 10bps
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D104D1.67723930]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mike Stupalov Sent: Wednesday, 7 October 2015 7:42 PM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
Hi,
I see you use too old observium revision. Update your install to latest, this should fix issue.
cd /opt/observium svn up ./discovery.php -u
On 07.10.15 3:41, Cameron Murray wrote: Mike,
The output of the requested command: https://dl.dropboxusercontent.com/u/8790688/log.txt
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D104D1.67723930]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mike Stupalov Sent: Tuesday, 6 October 2015 11:18 PM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
On 06.10.15 2:13, Cameron Murray wrote: Hi adam,
Still showing as 10bps – Have updated, Discovered and polled. Pls send debug output: ./poller.php -d -m ports -h <this_device>
Also note, this updated only in trunk (rolling) repo, stable not yet updated.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D104D1.67723930]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:57 AM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
There's a fix for this in SVN now. I've added code to use ifHighSpeed if ifHighSpeed is greater than ifSpeed (as it is in this case, and should never been in cases where ifSpeed is correct)
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:54:22, Adam Armstrong adama@memetic.orgmailto:adama@memetic.org wrote: Lol. Look up that RFC, it isn't helpful here :P
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:52:32, Cameron Murray cameron@techpath.com.aumailto:cameron@techpath.com.au wrote: From the Manual - RFC 3416 — Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:46 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Silly statement but is there such a port as 10bps? Can we adjust the config for this if 10bps then 10gbps.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Cameron Murray Sent: Tuesday, 6 October 2015 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Switch is running the newest release.
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [cid:image001.png@01D10014.44B7FEF0]http://www.techpath.com.au/
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook]http://www.facebook.com/techpathau
[Twitter]http://twitter.com/techpathau
[LinkedIn]http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Eduardo Schoedler Sent: Tuesday, 6 October 2015 8:27 AM To: Observium Network Observation System Subject: Re: [Observium] 10gbps port showing as 10bps
Have you tried a newer firmware?
-- Eduardo Schoedler
2015-10-05 19:24 GMT-03:00 Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au>: It is a very new Dell switch – Possible MIB set is different?
What details would you need to correct?
The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd Regards,
Cameron Murray Remote Support Engineer
From: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:21 AM To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
Hmm.
Returning "10" for ifSpeed is strange behaviour, and the cause of this bug.
I'm not sure how one should handle that! Perhaps via an OS-specific knob.
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
ALERT
Modifyhttp://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
Alert
Utilization has exceeded 80%
Entity
tengigabitethernet1/0/1http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
Conditions
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
Metrics
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
Duration
3 days, 1h 13m 43s (2015-09-28 13:43:41)
Device
Device
bne-be-l2r16-sw10ghttp://cacti.bettacomputers.com.au/device/device=99/
Hardware
Operating System
Generic Device
Location
Uptime
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 )
Regards,
Cameron Murray Remote Support Engineer
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
No. It's the fault of the guy who decided they should return "10" in ifSpeed rather than the standard convention of returning the maximum value.
We switch to ifHighSpeed when we see a maximum value returned in ifSpeed. I'm not sure what we should do here. It's a vendor bug for sure.
adam.
Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 05/10/2015 23:24:48, Cameron Murray cameron@techpath.com.au wrote: It is a very new Dell switch – Possible MIB set is different? What details would you need to correct? The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd [http://www.dell.com/au/business/p/networking-x-series/pd] Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click here [http://www.techpath.com.au/contact-us/feedback/] to rate my work. [http://www.techpath.com.au/]
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au
www.techpath.com.au [http://www.techpath.com.au]
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook] [http://www.facebook.com/techpathau] [Twitter] [http://twitter.com/techpathau] [LinkedIn] [http://www.linkedin.com/company/techpathau] Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Tuesday, 6 October 2015 8:21 AM To: observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps Hmm. Returning "10" for ifSpeed is strange behaviour, and the cause of this bug. I'm not sure how one should handle that! Perhaps via an OS-specific knob. adam. Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.au [mailto:cameron@techpath.com.au]> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps. ALERT Modify [http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=58...] Alert Utilization has exceeded 80% Entity tengigabitethernet1/0/1 [http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/] Conditions ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740) Metrics ifInOctets_perc = 623770 ifOutOctets_perc = 631740 Duration 3 days, 1h 13m 43s (2015-09-28 13:43:41) Device Device bne-be-l2r16-sw10g [http://cacti.bettacomputers.com.au/device/device=99/] Hardware Operating System Generic Device Location Uptime 3 days, 3h 46m 24s The ports that are trained up as 1gbps show correctly however higher do not. Port Data: port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 ) Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click here [http://www.techpath.com.au/contact-us/feedback/] to rate my work. [http://www.techpath.com.au/]
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au [mailto:cameron@techpath.com.au]
www.techpath.com.au [http://www.techpath.com.au]
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [Facebook] [http://www.facebook.com/techpathau] [Twitter] [http://twitter.com/techpathau] [LinkedIn] [http://www.linkedin.com/company/techpathau] Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.
I have a simular issue with a cisco switch.
If you look at the real time graph of the port is the scale correct?
On Mon, Oct 5, 2015 at 6:19 PM Cameron Murray cameron@techpath.com.au wrote:
As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
*ALERT*
Modify http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
*Alert*
Utilization has exceeded 80%
*Entity*
tengigabitethernet1/0/1 http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
*Conditions*
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
*Metrics*
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
*Duration*
3 days, 1h 13m 43s (2015-09-28 13:43:41)
*Device*
*Device*
bne-be-l2r16-sw10g http://cacti.bettacomputers.com.au/device/device=99/
*Hardware*
*Operating System*
Generic Device
*Location*
*Uptime*
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260
device_id => 99
port_64bit => 1
port_label => tengigabitethernet1/0/1
port_label_base => null
port_label_num => null
port_label_short => Te1/0/1
port_descr_type => null
port_descr_descr => null
port_descr_circuit => null
port_descr_speed => null
port_descr_notes => null
ifDescr => tengigabitethernet1/0/1
ifName => te1/0/1
portName => null
ifIndex => 1
ifSpeed => 10
ifConnectorPresent => true
ifPromiscuousMode => true
ifHighSpeed => 10000
ifOperStatus => up
ifAdminStatus => up
ifDuplex => fullDuplex
ifMtu => 1500
ifType => ethernetCsmacd
ifAlias =>
ifPhysAddress => f8b15686e676
ifHardType => null
ifLastChange => 2015-09-28 11:37:54
date-7da Australia/Brisbane (UTC+10)
ifVlan => 1
ifTrunk => dot1Q
ifVrf => null
ignore => 0
disabled => 0
detailed => 0
deleted => 0
pagpOperationMode => null
pagpPortState => null
pagpPartnerDeviceId => null
pagpPartnerLearnMethod => null
pagpPartnerIfIndex => null
pagpPartnerGroupIfIndex => null
pagpPartnerDeviceName => null
pagpEthcOperationMode => null
pagpDeviceId => null
pagpGroupIfIndex => null
ifInUcastPkts => 0
ifInUcastPkts_delta => 0
ifInUcastPkts_rate => 0
ifOutUcastPkts => 0
ifOutUcastPkts_delta => 0
ifOutUcastPkts_rate => 0
ifInErrors => 0
ifInErrors_delta => 0
ifInErrors_rate => 0
ifOutErrors => 0
ifOutErrors_delta => 0
ifOutErrors_rate => 0
ifOctets_rate => 199209
ifUcastPkts_rate => 0
ifErrors_rate => 0
ifInOctets => 30302781555
ifInOctets_delta => 46292430
ifInOctets_rate => 152780
ifOutOctets => 15509016948
ifOutOctets_delta => 14067927
ifOutOctets_rate => 46429
ifInOctets_perc => 255
ifOutOctets_perc => 255
poll_time => 1444083140
poll_period => 303
)
Regards,
*Cameron Murray* Remote Support Engineer
How am I doing? Please click here http://www.techpath.com.au/contact-us/feedback/ to rate my work.
http://www.techpath.com.au/ [image: image001.png]
*P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au
*www.techpath.com.au http://www.techpath.com.au*
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd
http://www.facebook.com/techpathau [image: image002.png]
http://twitter.com/techpathau [image: image003.png]
http://www.linkedin.com/company/techpathau [image: image004.png]
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
On 06.10.15 16:38, Bruce Winters wrote:
I have a simular issue with a cisco switch.
If you look at the real time graph of the port is the scale correct?
In realtime scale is auto expanded (by max values), it not related with ifSpeed.
On Mon, Oct 5, 2015 at 6:19 PM Cameron Murray <cameron@techpath.com.au mailto:cameron@techpath.com.au> wrote:
As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps. *ALERT*** Modify <http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/> *Alert* Utilization has exceeded 80% *Entity* tengigabitethernet1/0/1 <http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/> *Conditions* ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740) *Metrics* ifInOctets_perc = 623770 ifOutOctets_perc = 631740 *Duration* 3 days, 1h 13m 43s (2015-09-28 13:43:41) *Device*** *Device* bne-be-l2r16-sw10g <http://cacti.bettacomputers.com.au/device/device=99/> *Hardware* *Operating System* Generic Device *Location* *Uptime* 3 days, 3h 46m 24s The ports that are trained up as 1gbps show correctly however higher do not. Port Data: port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 ) Regards, *Cameron Murray* Remote Support Engineer How am I doing? Please click here <http://www.techpath.com.au/contact-us/feedback/> to rate my work. <http://www.techpath.com.au/> image001.png *P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au <mailto:cameron@techpath.com.au> *www.techpath.com.au <http://www.techpath.com.au>* Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd <http://www.facebook.com/techpathau> image002.png <http://twitter.com/techpathau> image003.png <http://www.linkedin.com/company/techpathau> image004.png Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
Sounds like ifSpeed is a 32bit value. 10Gbps written in bps is larger than the maximum value supported by 32bit. If that’s the case I would guess that there is no vendor out there that can put the correct value for a 10Gbps interface in here.
Cheers, Roman
From: observium [mailto:observium-bounces@observium.org] On Behalf Of Bruce Winters Sent: Wednesday, 7 October 2015 12:38 AM To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps
I have a simular issue with a cisco switch.
If you look at the real time graph of the port is the scale correct?
On Mon, Oct 5, 2015 at 6:19 PM Cameron Murray <cameron@techpath.com.aumailto:cameron@techpath.com.au> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
ALERT
Modifyhttp://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
Alert
Utilization has exceeded 80%
Entity
tengigabitethernet1/0/1http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
Conditions
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
Metrics
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
Duration
3 days, 1h 13m 43s (2015-09-28 13:43:41)
Device
Device
bne-be-l2r16-sw10ghttp://cacti.bettacomputers.com.au/device/device=99/
Hardware
Operating System
Generic Device
Location
Uptime
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 )
Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click herehttp://www.techpath.com.au/contact-us/feedback/ to rate my work. [image001.png]
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.aumailto:cameron@techpath.com.au
www.techpath.com.auhttp://www.techpath.com.au
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [image002.png]
[image003.png]
[image004.png]
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. _______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- ExchangeDefender Message Security: Click below to verify authenticity https://admin.exchangedefender.com/verify.php?id=t96LF7oK011253&from=rom...
Yes, this is the purpose of ifHighSpeed, to get around the 32-bit limitation.
Normally when ifSpeed overruns it's set to the maximum value, and we switch to ifHighSpeed. In this case the vendor has very helpfully decided to return a non-maximum value for ifSpeed, complicating the method needed to decide wether we should use ifSpeed or ifHighSpeed.
adam.
Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 06/10/2015 23:15:35, Roman Doerr roman.doerr@c3group.com.au wrote: Hi, Sounds like ifSpeed is a 32bit value. 10Gbps written in bps is larger than the maximum value supported by 32bit. If that’s the case I would guess that there is no vendor out there that can put the correct value for a 10Gbps interface in here. Cheers, Roman From: observium [mailto:observium-bounces@observium.org] On Behalf Of Bruce Winters Sent: Wednesday, 7 October 2015 12:38 AM To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] 10gbps port showing as 10bps I have a simular issue with a cisco switch. If you look at the real time graph of the port is the scale correct? On Mon, Oct 5, 2015 at 6:19 PM Cameron Murray <cameron@techpath.com.au [mailto:cameron@techpath.com.au]> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps. ALERT Modify [http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=58...] Alert Utilization has exceeded 80% Entity tengigabitethernet1/0/1 [http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/] Conditions ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740) Metrics ifInOctets_perc = 623770 ifOutOctets_perc = 631740 Duration 3 days, 1h 13m 43s (2015-09-28 13:43:41) Device Device bne-be-l2r16-sw10g [http://cacti.bettacomputers.com.au/device/device=99/] Hardware Operating System Generic Device Location Uptime 3 days, 3h 46m 24s The ports that are trained up as 1gbps show correctly however higher do not. Port Data: port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 ) Regards,
Cameron Murray Remote Support Engineer How am I doing? Please click here [http://www.techpath.com.au/contact-us/feedback/] to rate my work. [image001.png]
P 1300 033 300 F 07 3809 3999 E cameron@techpath.com.au [mailto:cameron@techpath.com.au]
www.techpath.com.au [http://www.techpath.com.au]
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 Formerly Betta Computer Services Pty Ltd [image002.png] [image003.png] [image004.png] Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. _______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
ExchangeDefender Message Security: Check Authenticity [https://admin.exchangedefender.com/verify.php?id=t96LF7oK011253&from=rom...]
participants (6)
-
Adam Armstrong -
Bruce Winters -
Cameron Murray -
Eduardo Schoedler -
Mike Stupalov -
Roman Doerr