SLA polling

Andre.Punt＠kpn.com

14 Jan 2019 14 Jan '19

4:05 a.m.

Hi,

I have an old server running observium and am busy migrating to a new server. Currently running into the following problem: ##### Module Start: sla #####

o CISCO-RTTMON-MIB CMD[/usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp 'udp':'host':'161' rttMonCtrl]

CMD EXITCODE[1] CMD RUNTIME[0.0451s] STDOUT[

] STDERR[ MIB search path: /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp Cannot find module (CISCO-RTTMON-MIB): At line 1 in (none) rttMonCtrl: Unknown Object Identifier (Sub-id not found: (top) -> rttMonCtrl) ] SNMP STATUS[FALSE] SNMP ERROR[#996 - MIB or oid not found]

Updated this morning (r9661) but still the same problem Base install is in /appl/observium

The MIB is present in the path: /appl/observium/mibs/cisco/CISCO-RTTMON-MIB

Any ideas where to start looking to solve this? (also had the problem in r9472 and in r8959 but worked before that)

Regards, André

Attachments:

attachment.html (text/html — 5.1 KB)

Show replies by date

Andre.Punt＠kpn.com

14 Jan 14 Jan

5:27 a.m.

I see that if I add the cisco sub-folder to the module path is does work: /usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp 'udp':'host':'161' rttMonCtrl MIB search path: /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp Cannot find module (CISCO-RTTMON-MIB): At line 1 in (none) rttMonCtrl: Unknown Object Identifier (Sub-id not found: (top) -> rttMonCtrl)

/usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp:/appl/observium/mibs/cisco 'udp':'host':'161' rttMonCtrl rttMonCtrlAdminOwner.1 = "IPSLA" rttMonCtrlAdminOwner.2 = "IPSLA" rttMonCtrlAdminOwner.3 = "IPSLA" rttMonCtrlAdminOwner.4 = "IPSLA" ....

So, where/how to add the extra path in the scripts?

André

From: observium observium-bounces@observium.org On Behalf Of André Punt via observium Sent: Monday, 14 January 2019 11:06 To: observium@observium.org Cc: Punt, André Andre.Punt@kpn.com Subject: [Observium] SLA polling

Hi,

I have an old server running observium and am busy migrating to a new server. Currently running into the following problem: ##### Module Start: sla #####

o CISCO-RTTMON-MIB CMD[/usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp 'udp':'host':'161' rttMonCtrl]

CMD EXITCODE[1] CMD RUNTIME[0.0451s] STDOUT[

Updated this morning (r9661) but still the same problem Base install is in /appl/observium

The MIB is present in the path: /appl/observium/mibs/cisco/CISCO-RTTMON-MIB

Any ideas where to start looking to solve this? (also had the problem in r9472 and in r8959 but worked before that)

Regards, André

adama＠memetic.org

16 Jan 16 Jan

1:21 p.m.

adama＠memetic.org

3:07 p.m.

This code is correctly setting the directory for me. Are you running an old version or do you have local modifications?

Adam.

From: observium observium-bounces@observium.org On Behalf Of adama--- via observium Sent: 16 January 2019 19:21 To: Observium observium@observium.org Cc: adama@memetic.org Subject: Re: [Observium] SLA polling

Aha this is interesting.

The correct mibdir should be set by the mib definition.

Let me have a quick look at that!

This is difficult to test because I don't have any cisco sla devices.

Adam.

Sent from my Huawei tablet

-------- Original Message -------- Subject: [Observium] SLA polling From: André Punt via observium To: observium@observium.org mailto:observium@observium.org CC: Andre.Punt@kpn.com mailto:Andre.Punt@kpn.com

Hi,

I have an old server running observium and am busy migrating to a new server.

Currently running into the following problem:

##### Module Start: sla #####

o CISCO-RTTMON-MIB

CMD[/usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp 'udp':'host':'161' rttMonCtrl]

CMD EXITCODE[1]

CMD RUNTIME[0.0451s]

STDOUT[

]

STDERR[

MIB search path: /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp

Cannot find module (CISCO-RTTMON-MIB): At line 1 in (none)

rttMonCtrl: Unknown Object Identifier (Sub-id not found: (top) -> rttMonCtrl)

]

SNMP STATUS[FALSE]

SNMP ERROR[#996 - MIB or oid not found]

Updated this morning (r9661) but still the same problem

Base install is in /appl/observium

The MIB is present in the path: /appl/observium/mibs/cisco/CISCO-RTTMON-MIB

Any ideas where to start looking to solve this?

(also had the problem in r9472 and in r8959 but worked before that)

Regards,

André

Andre.Punt＠kpn.com

10:57 p.m.

Hi Adam,

I tested it with several versions in the same directory, but all gave the same problem. I have 2 systems running at the moment with different setups but both have the same issue. Running stable atm, can have a look at running to see if it has the same problem for me

Regards, André

From: observium observium-bounces@observium.org On Behalf Of Adam Armstrong via observium Sent: Wednesday, 16 January 2019 22:08 To: 'Observium' observium@observium.org Cc: adama@memetic.org Subject: Re: [Observium] SLA polling

This code is correctly setting the directory for me. Are you running an old version or do you have local modifications?

Adam.

From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> On Behalf Of adama--- via observium Sent: 16 January 2019 19:21 To: Observium <observium@observium.orgmailto:observium@observium.org> Cc: adama@memetic.orgmailto:adama@memetic.org Subject: Re: [Observium] SLA polling

Aha this is interesting.

The correct mibdir should be set by the mib definition.

Let me have a quick look at that!

This is difficult to test because I don't have any cisco sla devices.

Adam.

Sent from my Huawei tablet

-------- Original Message -------- Subject: [Observium] SLA polling From: André Punt via observium To: observium@observium.orgmailto:observium@observium.org CC: Andre.Punt@kpn.commailto:Andre.Punt@kpn.com

Hi,

I have an old server running observium and am busy migrating to a new server. Currently running into the following problem: ##### Module Start: sla #####

o CISCO-RTTMON-MIB CMD[/usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp 'udp':'host':'161' rttMonCtrl]

CMD EXITCODE[1] CMD RUNTIME[0.0451s] STDOUT[

Updated this morning (r9661) but still the same problem Base install is in /appl/observium

The MIB is present in the path: /appl/observium/mibs/cisco/CISCO-RTTMON-MIB

Any ideas where to start looking to solve this? (also had the problem in r9472 and in r8959 but worked before that)

Regards, André

Adam Armstrong

10:58 p.m.

You didn't answer wether you have local modifications.

Adam.

⁣Sent from BlueMail

On 17 Jan 2019, 04:57, at 04:57, "André Punt via observium" observium@observium.org wrote:

...

Hi Adam,

I tested it with several versions in the same directory, but all gave the same problem. I have 2 systems running at the moment with different setups but both have the same issue. Running stable atm, can have a look at running to see if it has the same problem for me

Regards, André

From: observium observium-bounces@observium.org On Behalf Of Adam Armstrong via observium Sent: Wednesday, 16 January 2019 22:08 To: 'Observium' observium@observium.org Cc: adama@memetic.org Subject: Re: [Observium] SLA polling

This code is correctly setting the directory for me. Are you running an old version or do you have local modifications?

Adam.

From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> On Behalf Of adama--- via observium Sent: 16 January 2019 19:21 To: Observium <observium@observium.orgmailto:observium@observium.org> Cc: adama@memetic.orgmailto:adama@memetic.org Subject: Re: [Observium] SLA polling

Aha this is interesting.

The correct mibdir should be set by the mib definition.

Let me have a quick look at that!

This is difficult to test because I don't have any cisco sla devices.

Adam.

Sent from my Huawei tablet

-------- Original Message -------- Subject: [Observium] SLA polling From: André Punt via observium To: observium@observium.orgmailto:observium@observium.org CC: Andre.Punt@kpn.commailto:Andre.Punt@kpn.com

Hi,

I have an old server running observium and am busy migrating to a new server. Currently running into the following problem: ##### Module Start: sla #####

o CISCO-RTTMON-MIB CMD[/usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp 'udp':'host':'161' rttMonCtrl]

CMD EXITCODE[1] CMD RUNTIME[0.0451s] STDOUT[

] STDERR[ MIB search path: /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp Cannot find module (CISCO-RTTMON-MIB): At line 1 in (none) rttMonCtrl: Unknown Object Identifier (Sub-id not found: (top) -> rttMonCtrl) ] SNMP STATUS[FALSE] SNMP ERROR[#996 - MIB or oid not found]

Updated this morning (r9661) but still the same problem Base install is in /appl/observium

The MIB is present in the path: /appl/observium/mibs/cisco/CISCO-RTTMON-MIB

Any ideas where to start looking to solve this? (also had the problem in r9472 and in r8959 but worked before that)

Regards, André

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Andre.Punt＠kpn.com

21 Jan 21 Jan

1:20 a.m.

Hi Adam & Mike,

Just created a new folder and downloaded the latest release (r9681) but still the same problem: ##### Module Start: sla #####

o CISCO-RTTMON-MIB CMD[/usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp 'udp':'host':'161' rttMonCtrl]

CMD EXITCODE[1] CMD RUNTIME[0.0251s] STDOUT[

CMD[/usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-IP-EXT-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp:/appl/observium/mibs/cisco 'udp':'host':'161' crttMonIPEchoAdminTargetAddress]

CMD EXITCODE[0] CMD RUNTIME[0.1639s] STDOUT[ crttMonIPEchoAdminTargetAddress.1 = "86 DE 57 9E " crttMonIPEchoAdminTargetAddress.2 = "86 DE 57 AC " crttMonIPEchoAdminTargetAddress.3 = "86 DE 57 9F " crttMonIPEchoAdminTargetAddress.4 = "86 DE 57 B9 " crttMonIPEchoAdminTargetAddress.5 = "86 DE 57 A3 " crttMonIPEchoAdminTargetAddress.7 = "86 DE 57 BF " crttMonIPEchoAdminTargetAddress.8 = "86 DE 57 8E " crttMonIPEchoAdminTargetAddress.9 = "86 DE 57 BB " crttMonIPEchoAdminTargetAddress.10 = "86 DE 57 C6 " crttMonIPEchoAdminTargetAddress.11 = "86 DE 57 C9 " ] SNMP STATUS[TRUE]

SQL[SELECT * FROM `slas` WHERE `device_id` = '338'] SQL RUNTIME[0.00030994s]

o Duration 0.1958s

[observium]$ svn status [observium]$

Trying by hand: [observium]$ /usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp 'udp':'host':'161' rttMonCtrl MIB search path: /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp Cannot find module (CISCO-RTTMON-MIB): At line 1 in (none) rttMonCtrl: Unknown Object Identifier (Sub-id not found: (top) -> rttMonCtrl) [observium]$ [observium]$ [observium]$ /usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp:/appl/observium/mibs/cisco 'udp':'host':'161' rttMonCtrl rttMonCtrlAdminOwner.1 = "IPSLA" rttMonCtrlAdminOwner.2 = "IPSLA" rttMonCtrlAdminOwner.3 = "IPSLA" rttMonCtrlAdminOwner.4 = "IPSLA" rttMonCtrlAdminOwner.5 = "IPSLA" rttMonCtrlAdminOwner.7 = "IPSLA" rttMonCtrlAdminOwner.8 = "IPSLA" rttMonCtrlAdminOwner.9 = "IPSLA" rttMonCtrlAdminOwner.10 = "IPSLA" rttMonCtrlAdminOwner.11 = "IPSLA"

Regards, André

From: Adam Armstrong adama@memetic.org Sent: Thursday, 17 January 2019 05:59 To: André Punt via observium observium@observium.org Cc: Punt, André Andre.Punt@kpn.com Subject: Re: [Observium] SLA polling

You didn't answer wether you have local modifications. Adam. Sent from BlueMailhttp://www.bluemail.me/r?b=14063 On 17 Jan 2019, at 04:57, "André Punt via observium" <observium@observium.orgmailto:observium@observium.org> wrote: Hi Adam,

Regards, André

From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> On Behalf Of Adam Armstrong via observium Sent: Wednesday, 16 January 2019 22:08 To: 'Observium' <observium@observium.orgmailto:observium@observium.org> Cc: adama@memetic.orgmailto:adama@memetic.org Subject: Re: [Observium] SLA polling

This code is correctly setting the directory for me. Are you running an old version or do you have local modifications?

Adam.

Aha this is interesting.

The correct mibdir should be set by the mib definition.

Let me have a quick look at that!

This is difficult to test because I don't have any cisco sla devices.

Adam.

Sent from my Huawei tablet

-------- Original Message -------- Subject: [Observium] SLA polling From: André Punt via observium To: observium@observium.orgmailto:observium@observium.org CC: Andre.Punt@kpn.commailto:Andre.Punt@kpn.com Hi,

I have an old server running observium and am busy migrating to a new server. Currently running into the following problem: ##### Module Start: sla #####

o CISCO-RTTMON-MIB CMD[/usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu -OQUs -m CISCO-RTTMON-MIB -M /appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp 'udp':'host':'161' rttMonCtrl]

CMD EXITCODE[1] CMD RUNTIME[0.0451s] STDOUT[

Updated this morning (r9661) but still the same problem Base install is in /appl/observium

The MIB is present in the path: /appl/observium/mibs/cisco/CISCO-RTTMON-MIB

Any ideas where to start looking to solve this? (also had the problem in r9472 and in r8959 but worked before that)

Regards, André

________________________________

observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Mike Stupalov

17 Jan 17 Jan

1:21 a.m.

Show output:

svn status /appl/observium

André Punt via observium wrote on 17/01/2019 07:57:

...

Hi Adam,

I tested it with several versions in the same directory, but all gave the same problem.

I have 2 systems running at the moment with different setups but both have the same issue.

Running stable atm, can have a look at running to see if it has the same problem for me

Regards,

André

*From:*observium observium-bounces@observium.org *On Behalf Of *Adam Armstrong via observium *Sent:* Wednesday, 16 January 2019 22:08 *To:* 'Observium' observium@observium.org *Cc:* adama@memetic.org *Subject:* Re: [Observium] SLA polling

This code is correctly setting the directory for me. Are you running an old version or do you have local modifications?

Adam.

*From:*observium <observium-bounces@observium.org mailto:observium-bounces@observium.org> *On Behalf Of *adama--- via observium *Sent:* 16 January 2019 19:21 *To:* Observium <observium@observium.org mailto:observium@observium.org> *Cc:* adama@memetic.org mailto:adama@memetic.org *Subject:* Re: [Observium] SLA polling

Aha this is interesting.

The correct mibdir should be set by the mib definition.

Let me have a quick look at that!

This is difficult to test because I don't have any cisco sla devices.

Adam.

Sent from my Huawei tablet

-------- Original Message -------- Subject: [Observium] SLA polling From: André Punt via observium To: observium@observium.org mailto:observium@observium.org CC: Andre.Punt@kpn.com mailto:Andre.Punt@kpn.com
Hi,

I have an old server running observium and am busy migrating to a
new server.

Currently running into the following problem:

##### Module Start: sla  #####

o CISCO-RTTMON-MIB

CMD[/usr/bin/snmpbulkwalk -Cr'100' -t '1' -r '5' -v2c -c *** -Pu
-OQUs -m CISCO-RTTMON-MIB -M
/appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp
'udp':'host':'161' rttMonCtrl]

CMD EXITCODE[1]

CMD RUNTIME[0.0451s]

STDOUT[

]

STDERR[

MIB search path:
/appl/observium/mibs/rfc:/appl/observium/mibs/net-snmp

Cannot find module (CISCO-RTTMON-MIB): At line 1 in (none)

rttMonCtrl: Unknown Object Identifier (Sub-id not found: (top) ->
rttMonCtrl)

]

SNMP STATUS[FALSE]

SNMP ERROR[#996 - MIB or oid not found]

Updated this morning (r9661) but still the same problem

Base install is in /appl/observium

The MIB is present in the path:
/appl/observium/mibs/cisco/CISCO-RTTMON-MIB

Any ideas where to start looking to solve this?

(also had the problem in r9472 and in r8959 but worked before that)

Regards,

André
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

-- Mike Stupalov Observium Limited, http://observium.org

2208

Age (days ago)

2215

Last active (days ago)

List overview

Download

7 comments

4 participants

tags (0)

participants (4)

Adam Armstrong
adama＠memetic.org
Andre.Punt＠kpn.com
Mike Stupalov