Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote:
Unified IP MIB Reference, May 2015 Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/docs/faq/#my-router-does-not-show-ipv6-bgp-sessions...
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e).
Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
mailto:ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
yes, I was see documentation, but anyway still did not find any device where it exist..
Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR < ybzahr@prodware.fr> wrote:
Dear Mike,
Apparently, it is supported according to their documentation (see attached).
If needed, I can test for you if you provide me with the commands.
Best regards.
From: observium observium-bounces@observium.org on behalf of Mike Stupalov mike@observium.org Reply-To: Observium Network Observation System observium@observium.org Date: jeudi 17 novembre 2016 09:31 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote:
Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/ docs/faq/#my-router-does-not-show-ipv6-bgp-sessions-how-come
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e).
Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr
http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalovhttp://observium.org
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov mike@observium.org wrote:
Hi,
yes, I was see documentation, but anyway still did not find any device where it exist..
Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR < ybzahr@prodware.fr> wrote:
Dear Mike,
Apparently, it is supported according to their documentation (see attached).
If needed, I can test for you if you provide me with the commands.
Best regards.
From: observium observium-bounces@observium.org on behalf of Mike Stupalov mike@observium.org Reply-To: Observium Network Observation System observium@observium.org Date: jeudi 17 novembre 2016 09:31 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote:
Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/doc s/faq/#my-router-does-not-show-ipv6-bgp-sessions-how-come
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e).
Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr
http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalovhttp://observium.org
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
Hi Mike
this update left my Brocade CER hanging with a high CPU consumed by SNMP. I went back to revision 8234. Now I try to recover the CER...
Kind regards Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov mike@observium.org:
Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov mike@observium.org wrote:
Hi,
yes, I was see documentation, but anyway still did not find any device where it exist..
Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR < ybzahr@prodware.fr> wrote:
Dear Mike,
Apparently, it is supported according to their documentation (see attached).
If needed, I can test for you if you provide me with the commands.
Best regards.
From: observium observium-bounces@observium.org on behalf of Mike Stupalov mike@observium.org Reply-To: Observium Network Observation System observium@observium.org Date: jeudi 17 novembre 2016 09:31 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote:
Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/doc s/faq/#my-router-does-not-show-ipv6-bgp-sessions-how-come
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e).
Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr
http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalovhttp://observium.org
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
-- Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Basile,
haha, this mean vendor added support for this table in snmp, but never test this :)
Or firmware on your device old :)
Pls show debug for poller (with latest revision!): ./poller.php -d -m os,processors,bgp-peers -h <device>
On Fri, Nov 18, 2016 at 10:30 AM, Basile Bluntschli < basile.bluntschli@gmail.com> wrote:
Hi Mike
this update left my Brocade CER hanging with a high CPU consumed by SNMP. I went back to revision 8234. Now I try to recover the CER...
Kind regards Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov mike@observium.org:
Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov mike@observium.org wrote:
Hi,
yes, I was see documentation, but anyway still did not find any device where it exist..
Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR < ybzahr@prodware.fr> wrote:
Dear Mike,
Apparently, it is supported according to their documentation (see attached).
If needed, I can test for you if you provide me with the commands.
Best regards.
From: observium observium-bounces@observium.org on behalf of Mike Stupalov mike@observium.org Reply-To: Observium Network Observation System <observium@observium.org
Date: jeudi 17 novembre 2016 09:31 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote:
Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/doc s/faq/#my-router-does-not-show-ipv6-bgp-sessions-how-come
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e).
Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr
http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalovhttp://observium.org
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
-- Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Some feedback:
I'm seeing a steady stream of this kind of event log message every 5 minutes from each of my Netiron devices doing BGP:
Bgp-peers: 2 updated, 28 unchanged. Forced discovery module(s): bgp-peers
It's not causing any issues other than filling our Obs event log.
--Chris
On 18 November 2016 at 17:41, Mike Stupalov mike@observium.org wrote:
Hi Basile,
haha, this mean vendor added support for this table in snmp, but never test this :)
Or firmware on your device old :)
Pls show debug for poller (with latest revision!): ./poller.php -d -m os,processors,bgp-peers -h <device>
On Fri, Nov 18, 2016 at 10:30 AM, Basile Bluntschli < basile.bluntschli@gmail.com> wrote:
Hi Mike
this update left my Brocade CER hanging with a high CPU consumed by SNMP. I went back to revision 8234. Now I try to recover the CER...
Kind regards Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov mike@observium.org:
Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov mike@observium.org wrote:
Hi,
yes, I was see documentation, but anyway still did not find any device where it exist..
Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR < ybzahr@prodware.fr> wrote:
Dear Mike,
Apparently, it is supported according to their documentation (see attached).
If needed, I can test for you if you provide me with the commands.
Best regards.
From: observium observium-bounces@observium.org on behalf of Mike Stupalov mike@observium.org Reply-To: Observium Network Observation System < observium@observium.org> Date: jeudi 17 novembre 2016 09:31 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote:
Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/doc s/faq/#my-router-does-not-show-ipv6-bgp-sessions-how-come
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e).
Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr
http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalovhttp://observium.org
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
-- Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
same poller debug pls..
-- Mike Stupalov http://observium.org
Christopher Pole chris@apexn.com.au 18 ноября 2016 г. 10:48:57 AM написал:
Some feedback:
I'm seeing a steady stream of this kind of event log message every 5 minutes from each of my Netiron devices doing BGP:
Bgp-peers: 2 updated, 28 unchanged. Forced discovery module(s): bgp-peers
It's not causing any issues other than filling our Obs event log.
--Chris
On 18 November 2016 at 17:41, Mike Stupalov mike@observium.org wrote:
Hi Basile,
haha, this mean vendor added support for this table in snmp, but never test this :)
Or firmware on your device old :)
Pls show debug for poller (with latest revision!): ./poller.php -d -m os,processors,bgp-peers -h <device>
On Fri, Nov 18, 2016 at 10:30 AM, Basile Bluntschli < basile.bluntschli@gmail.com> wrote:
Hi Mike
this update left my Brocade CER hanging with a high CPU consumed by SNMP. I went back to revision 8234. Now I try to recover the CER...
Kind regards Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov mike@observium.org:
Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov mike@observium.org wrote:
Hi,
yes, I was see documentation, but anyway still did not find any device where it exist..
Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR < ybzahr@prodware.fr> wrote:
Dear Mike,
Apparently, it is supported according to their documentation (see attached).
If needed, I can test for you if you provide me with the commands.
Best regards.
From: observium observium-bounces@observium.org on behalf of Mike Stupalov mike@observium.org Reply-To: Observium Network Observation System < observium@observium.org> Date: jeudi 17 novembre 2016 09:31 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote:
Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/doc s/faq/#my-router-does-not-show-ipv6-bgp-sessions-how-come
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e).
Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr
http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalovhttp://observium.org
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
-- Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi All
running 5.6h. Target Release Train, as far as I understood... SNMP clear cache -> CPU still high SNMP unconfigure -> CPU still high reload device -> all fine again
I'm not able to send you a debug output as of now... I would need to reboot my devices again to have SNMP working again...
Thanks Basile
2016-11-18 9:11 GMT+01:00 Mike Stupalov mike@observium.org:
Hi,
same poller debug pls..
-- Mike Stupalov http://observium.org
Christopher Pole chris@apexn.com.au 18 ноября 2016 г. 10:48:57 AM написал:
Some feedback:
I'm seeing a steady stream of this kind of event log message every 5 minutes from each of my Netiron devices doing BGP:
Bgp-peers: 2 updated, 28 unchanged. Forced discovery module(s): bgp-peers
It's not causing any issues other than filling our Obs event log.
--Chris
On 18 November 2016 at 17:41, Mike Stupalov mike@observium.org wrote:
Hi Basile,
haha, this mean vendor added support for this table in snmp, but never test this :)
Or firmware on your device old :)
Pls show debug for poller (with latest revision!): ./poller.php -d -m os,processors,bgp-peers -h <device>
On Fri, Nov 18, 2016 at 10:30 AM, Basile Bluntschli < basile.bluntschli@gmail.com> wrote:
Hi Mike
this update left my Brocade CER hanging with a high CPU consumed by SNMP. I went back to revision 8234. Now I try to recover the CER...
Kind regards Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov mike@observium.org:
Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov mike@observium.org wrote:
Hi,
yes, I was see documentation, but anyway still did not find any device where it exist..
Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR < ybzahr@prodware.fr> wrote:
> Dear Mike, > > Apparently, it is supported according to their documentation (see > attached). > > > If needed, I can test for you if you provide me with the commands. > > Best regards. > > > > From: observium observium-bounces@observium.org on behalf of Mike > Stupalov mike@observium.org > Reply-To: Observium Network Observation System < > observium@observium.org> > Date: jeudi 17 novembre 2016 09:31 > To: Observium Network Observation System observium@observium.org > Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 > BGP sessions > > Hi, > > On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote: > > Dear Community, > > I was wondering why I wasn’t able to recover any information about > IPv6 BGP sessions from our core routers (Brocade MLXe / CER). > > Then I found this page in the FAQ : http://www.observium.org/doc > s/faq/#my-router-does-not-show-ipv6-bgp-sessions-how-come > > I checked related MIB documentation from our vendor, and it seems > that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS > version (running NetIron 5.7e). > > Just I still not have access to any device which support this > MIB/draft.. > > > Can I ask from the community if there is a debug version that I can > run in order to make sur of that ? > > Thanks. > > > *Youssef BENGELLOUN - ZAHR* - Consultant Expert > Prodware France > T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr > ------------------------------ > Web : prodware.fr http://www.prodware.fr > http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ > https://www.linkedin.com/company/prodwarefrance > https://www.youtube.com/c/ProdwareFrance > http://www.viadeo.com/fr/company/prodware > http://www.prodware.fr/social-network/ > > > > > > *Youssef BENGELLOUN - ZAHR* - Consultant Expert > Prodware France > T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr > ------------------------------ > Web : prodware.fr http://www.prodware.fr > > http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ > https://www.linkedin.com/company/prodwarefrance > https://www.youtube.com/c/ProdwareFrance > http://www.viadeo.com/fr/company/prodware > http://www.prodware.fr/social-network/ > > > > _______________________________________________ > observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > > > -- > Mike Stupalovhttp://observium.org > > > _______________________________________________ > observium mailing list > observium@observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >
-- Mike Stupalov http://observium.org/
-- Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi All
anyone experienced the same? And got it working? I still did not update Observium since that happend...
Thanks Basile
2016-11-18 9:33 GMT+01:00 Basile Bluntschli basile.bluntschli@gmail.com:
Hi All
running 5.6h. Target Release Train, as far as I understood... SNMP clear cache -> CPU still high SNMP unconfigure -> CPU still high reload device -> all fine again
I'm not able to send you a debug output as of now... I would need to reboot my devices again to have SNMP working again...
Thanks Basile
2016-11-18 9:11 GMT+01:00 Mike Stupalov mike@observium.org:
Hi,
same poller debug pls..
-- Mike Stupalov http://observium.org
Christopher Pole chris@apexn.com.au 18 ноября 2016 г. 10:48:57 AM написал:
Some feedback:
I'm seeing a steady stream of this kind of event log message every 5 minutes from each of my Netiron devices doing BGP:
Bgp-peers: 2 updated, 28 unchanged. Forced discovery module(s): bgp-peers
It's not causing any issues other than filling our Obs event log.
--Chris
On 18 November 2016 at 17:41, Mike Stupalov mike@observium.org wrote:
Hi Basile,
haha, this mean vendor added support for this table in snmp, but never test this :)
Or firmware on your device old :)
Pls show debug for poller (with latest revision!): ./poller.php -d -m os,processors,bgp-peers -h <device>
On Fri, Nov 18, 2016 at 10:30 AM, Basile Bluntschli < basile.bluntschli@gmail.com> wrote:
Hi Mike
this update left my Brocade CER hanging with a high CPU consumed by SNMP. I went back to revision 8234. Now I try to recover the CER...
Kind regards Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov mike@observium.org:
Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov mike@observium.org wrote:
> Hi, > > yes, I was see documentation, but anyway still did not find any device > where it exist.. > > Better if you provide snmp access to device where this bgp tables > exist for my dev: > 77.222.50.30 > 2a02:408:7722:5030::5030 > > > On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR < > ybzahr@prodware.fr> wrote: > >> Dear Mike, >> >> Apparently, it is supported according to their documentation (see >> attached). >> >> >> If needed, I can test for you if you provide me with the commands. >> >> Best regards. >> >> >> >> From: observium observium-bounces@observium.org on behalf of >> Mike Stupalov mike@observium.org >> Reply-To: Observium Network Observation System < >> observium@observium.org> >> Date: jeudi 17 novembre 2016 09:31 >> To: Observium Network Observation System observium@observium.org >> Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 >> BGP sessions >> >> Hi, >> >> On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote: >> >> Dear Community, >> >> I was wondering why I wasn’t able to recover any information about >> IPv6 BGP sessions from our core routers (Brocade MLXe / CER). >> >> Then I found this page in the FAQ : http://www.observium.org/doc >> s/faq/#my-router-does-not-show-ipv6-bgp-sessions-how-come >> >> I checked related MIB documentation from our vendor, and it seems >> that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS >> version (running NetIron 5.7e). >> >> Just I still not have access to any device which support this >> MIB/draft.. >> >> >> Can I ask from the community if there is a debug version that I can >> run in order to make sur of that ? >> >> Thanks. >> >> >> *Youssef BENGELLOUN - ZAHR* - Consultant Expert >> Prodware France >> T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr >> ------------------------------ >> Web : prodware.fr http://www.prodware.fr >> http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ >> https://www.linkedin.com/company/prodwarefrance >> https://www.youtube.com/c/ProdwareFrance >> http://www.viadeo.com/fr/company/prodware >> http://www.prodware.fr/social-network/ >> >> >> >> >> >> *Youssef BENGELLOUN - ZAHR* - Consultant Expert >> Prodware France >> T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr >> ------------------------------ >> Web : prodware.fr http://www.prodware.fr >> >> http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ >> https://www.linkedin.com/company/prodwarefrance >> https://www.youtube.com/c/ProdwareFrance >> http://www.viadeo.com/fr/company/prodware >> http://www.prodware.fr/social-network/ >> >> >> >> _______________________________________________ >> observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> >> >> -- >> Mike Stupalovhttp://observium.org >> >> >> _______________________________________________ >> observium mailing list >> observium@observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> > > > -- > Mike Stupalov > http://observium.org/ >
-- Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi there, we had exactly the same problem last week with some XMR routers! Looking at the SVN log, it looks like the default behaviour for Brocade devices changed around 9/11/16 (from memory) to use the FOUNDRY-BGP4V2-MIB.
The cause of the problem appears to be the MIB returning a full BGP table via the SNMP Walk (we saw high process usage for the SNMP and BGP processes, presume you see the same?).
Our workaround is to disable the FOUNDRY-BGP4V2-MIB in the device properties and just use the default BGP4-MIB. Also we didn’t have to reboot anything, we found applying an SNMP ACL to *not* allow the Observium box to hit the router reduced the CPU usage after about 30 minutes so that might help you out also.
I actually raised this via Brocade and they confirmed the issue, presume it would be possible to create an SNMP View on the router to skip that part of the MIB but not looked into it yet.
Thanks,
Jon
From: observium [mailto:observium-bounces@observium.org] On Behalf Of Basile Bluntschli Sent: 24 January 2017 07:50 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi All anyone experienced the same? And got it working? I still did not update Observium since that happend... Thanks Basile
2016-11-18 9:33 GMT+01:00 Basile Bluntschli <basile.bluntschli@gmail.commailto:basile.bluntschli@gmail.com>: Hi All running 5.6h. Target Release Train, as far as I understood... SNMP clear cache -> CPU still high SNMP unconfigure -> CPU still high reload device -> all fine again I'm not able to send you a debug output as of now... I would need to reboot my devices again to have SNMP working again... Thanks Basile
2016-11-18 9:11 GMT+01:00 Mike Stupalov <mike@observium.orgmailto:mike@observium.org>:
Hi,
same poller debug pls..
-- Mike Stupalov http://observium.org
Christopher Pole <chris@apexn.com.aumailto:chris@apexn.com.au> 18 ноября 2016 г. 10:48:57 AM написал: Some feedback:
I'm seeing a steady stream of this kind of event log message every 5 minutes from each of my Netiron devices doing BGP:
Bgp-peers: 2 updated, 28 unchanged. Forced discovery module(s): bgp-peers
It's not causing any issues other than filling our Obs event log.
--Chris
On 18 November 2016 at 17:41, Mike Stupalov <mike@observium.orgmailto:mike@observium.org> wrote: Hi Basile, haha, this mean vendor added support for this table in snmp, but never test this :) Or firmware on your device old :) Pls show debug for poller (with latest revision!): ./poller.php -d -m os,processors,bgp-peers -h <device>
On Fri, Nov 18, 2016 at 10:30 AM, Basile Bluntschli <basile.bluntschli@gmail.commailto:basile.bluntschli@gmail.com> wrote: Hi Mike this update left my Brocade CER hanging with a high CPU consumed by SNMP. I went back to revision 8234. Now I try to recover the CER... Kind regards Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov <mike@observium.orgmailto:mike@observium.org>: Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov <mike@observium.orgmailto:mike@observium.org> wrote: Hi, yes, I was see documentation, but anyway still did not find any device where it exist.. Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR <ybzahr@prodware.frmailto:ybzahr@prodware.fr> wrote: Dear Mike,
Apparently, it is supported according to their documentation (see attached).
[cid:image001.png@01D27617.70A395E0]
If needed, I can test for you if you provide me with the commands.
Best regards.
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of Mike Stupalov <mike@observium.orgmailto:mike@observium.org> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: jeudi 17 novembre 2016 09:31 To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote: Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/docs/faq/#my-router-does-not-show-ipv6-bgp-sessions...
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e). Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
Youssef BENGELLOUN - ZAHR - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.frmailto:ybzahr@prodware.fr ________________________________
[cid:image002.png@01D27617.70A395E0]
Web : prodware.frhttp://www.prodware.fr[cid:image003.jpg@01D27617.70A395E0]http://twitter.com/Prodware/ [cid:image004.jpg@01D27617.70A395E0] http://www.facebook.com/Prodware/ [cid:image005.jpg@01D27617.70A395E0] https://www.linkedin.com/company/prodwarefrance [cid:image006.jpg@01D27617.70A395E0] https://www.youtube.com/c/ProdwareFrance [cid:image007.jpg@01D27617.70A395E0] http://www.viadeo.com/fr/company/prodware [cid:image008.jpg@01D27617.70A395E0] http://www.prodware.fr/social-network/
Youssef BENGELLOUN - ZAHR - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.frmailto:ybzahr@prodware.fr ________________________________
[cid:image002.png@01D27617.70A395E0]
Web : prodware.frhttp://www.prodware.fr [cid:image003.jpg@01D27617.70A395E0]http://twitter.com/Prodware/ [cid:image004.jpg@01D27617.70A395E0] http://www.facebook.com/Prodware/ [cid:image005.jpg@01D27617.70A395E0] https://www.linkedin.com/company/prodwarefrance [cid:image006.jpg@01D27617.70A395E0] https://www.youtube.com/c/ProdwareFrance [cid:image007.jpg@01D27617.70A395E0] http://www.viadeo.com/fr/company/prodware [cid:image008.jpg@01D27617.70A395E0] http://www.prodware.fr/social-network/
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
-- Mike Stupalov http://observium.org/
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium%40observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Jon
thanks for the reply. Yeah I was referring to the high CPU issue. So seems to be a doable way to disable the FOUNDRY-BGP4V2-MIB. Has Brocade named an Ironware release which it is fixed?
Thanks Basile
2017-01-24 8:57 GMT+01:00 Jonathan Dyson jonathan.dyson@piksel.com:
Hi there, we had exactly the same problem last week with some XMR routers! Looking at the SVN log, it looks like the default behaviour for Brocade devices changed around 9/11/16 (from memory) to use the FOUNDRY-BGP4V2-MIB.
The cause of the problem appears to be the MIB returning a full BGP table via the SNMP Walk (we saw high process usage for the SNMP and BGP processes, presume you see the same?).
Our workaround is to disable the FOUNDRY-BGP4V2-MIB in the device properties and just use the default BGP4-MIB. Also we didn’t have to reboot anything, we found applying an SNMP ACL to **not** allow the Observium box to hit the router reduced the CPU usage after about 30 minutes so that might help you out also.
I actually raised this via Brocade and they confirmed the issue, presume it would be possible to create an SNMP View on the router to skip that part of the MIB but not looked into it yet.
Thanks,
Jon
*From:* observium [mailto:observium-bounces@observium.org] *On Behalf Of *Basile Bluntschli *Sent:* 24 January 2017 07:50
*To:* Observium Network Observation System observium@observium.org *Subject:* Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi All
anyone experienced the same? And got it working? I still did not update Observium since that happend...
Thanks
Basile
2016-11-18 9:33 GMT+01:00 Basile Bluntschli basile.bluntschli@gmail.com:
Hi All
running 5.6h. Target Release Train, as far as I understood...
SNMP clear cache -> CPU still high SNMP unconfigure -> CPU still high
reload device -> all fine again
I'm not able to send you a debug output as of now...
I would need to reboot my devices again to have SNMP working again...
Thanks
Basile
2016-11-18 9:11 GMT+01:00 Mike Stupalov mike@observium.org:
Hi,
same poller debug pls..
-- Mike Stupalov http://observium.org
Christopher Pole chris@apexn.com.au 18 ноября 2016 г. 10:48:57 AM написал:
Some feedback:
I'm seeing a steady stream of this kind of event log message every 5 minutes from each of my Netiron devices doing BGP:
Bgp-peers: 2 updated, 28 unchanged.
Forced discovery module(s): bgp-peers
It's not causing any issues other than filling our Obs event log.
--Chris
On 18 November 2016 at 17:41, Mike Stupalov mike@observium.org wrote:
Hi Basile,
haha, this mean vendor added support for this table in snmp, but never test this :)
Or firmware on your device old :)
Pls show debug for poller (with latest revision!):
./poller.php -d -m os,processors,bgp-peers -h <device>
On Fri, Nov 18, 2016 at 10:30 AM, Basile Bluntschli < basile.bluntschli@gmail.com> wrote:
Hi Mike
this update left my Brocade CER hanging with a high CPU consumed by SNMP.
I went back to revision 8234.
Now I try to recover the CER...
Kind regards
Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov mike@observium.org:
Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov mike@observium.org wrote:
Hi,
yes, I was see documentation, but anyway still did not find any device where it exist..
Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR < ybzahr@prodware.fr> wrote:
Dear Mike,
Apparently, it is supported according to their documentation (see attached).
If needed, I can test for you if you provide me with the commands.
Best regards.
*From: *observium observium-bounces@observium.org on behalf of Mike Stupalov mike@observium.org *Reply-To: *Observium Network Observation System observium@observium.org *Date: *jeudi 17 novembre 2016 09:31 *To: *Observium Network Observation System observium@observium.org *Subject: *Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote:
Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/ docs/faq/#my-router-does-not-show-ipv6-bgp-sessions-how-come
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e).
Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr
http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
observium mailing list
observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov http://observium.org/
--
Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi there,
No apparently it is a feature ☺ We are running version 5.6k but they re-produced it on their own test MLXe switches running newer versions (we can’t run greater than 5.6 due to hardware limitations). Might be worth some other people raising it so that it gains some traction within Brocade?
Thanks,
Jon
From: observium [mailto:observium-bounces@observium.org] On Behalf Of Basile Bluntschli Sent: 24 January 2017 08:21 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi Jon thanks for the reply. Yeah I was referring to the high CPU issue. So seems to be a doable way to disable the FOUNDRY-BGP4V2-MIB. Has Brocade named an Ironware release which it is fixed? Thanks Basile
2017-01-24 8:57 GMT+01:00 Jonathan Dyson <jonathan.dyson@piksel.commailto:jonathan.dyson@piksel.com>: Hi there, we had exactly the same problem last week with some XMR routers! Looking at the SVN log, it looks like the default behaviour for Brocade devices changed around 9/11/16 (from memory) to use the FOUNDRY-BGP4V2-MIB.
The cause of the problem appears to be the MIB returning a full BGP table via the SNMP Walk (we saw high process usage for the SNMP and BGP processes, presume you see the same?).
Our workaround is to disable the FOUNDRY-BGP4V2-MIB in the device properties and just use the default BGP4-MIB. Also we didn’t have to reboot anything, we found applying an SNMP ACL to *not* allow the Observium box to hit the router reduced the CPU usage after about 30 minutes so that might help you out also.
I actually raised this via Brocade and they confirmed the issue, presume it would be possible to create an SNMP View on the router to skip that part of the MIB but not looked into it yet.
Thanks,
Jon
From: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] On Behalf Of Basile Bluntschli Sent: 24 January 2017 07:50
To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi All anyone experienced the same? And got it working? I still did not update Observium since that happend... Thanks Basile
2016-11-18 9:33 GMT+01:00 Basile Bluntschli <basile.bluntschli@gmail.commailto:basile.bluntschli@gmail.com>: Hi All running 5.6h. Target Release Train, as far as I understood... SNMP clear cache -> CPU still high SNMP unconfigure -> CPU still high reload device -> all fine again I'm not able to send you a debug output as of now... I would need to reboot my devices again to have SNMP working again... Thanks Basile
2016-11-18 9:11 GMT+01:00 Mike Stupalov <mike@observium.orgmailto:mike@observium.org>:
Hi,
same poller debug pls..
-- Mike Stupalov http://observium.org
Christopher Pole <chris@apexn.com.aumailto:chris@apexn.com.au> 18 ноября 2016 г. 10:48:57 AM написал: Some feedback:
I'm seeing a steady stream of this kind of event log message every 5 minutes from each of my Netiron devices doing BGP:
Bgp-peers: 2 updated, 28 unchanged. Forced discovery module(s): bgp-peers
It's not causing any issues other than filling our Obs event log.
--Chris
On 18 November 2016 at 17:41, Mike Stupalov <mike@observium.orgmailto:mike@observium.org> wrote: Hi Basile, haha, this mean vendor added support for this table in snmp, but never test this :) Or firmware on your device old :) Pls show debug for poller (with latest revision!): ./poller.php -d -m os,processors,bgp-peers -h <device>
On Fri, Nov 18, 2016 at 10:30 AM, Basile Bluntschli <basile.bluntschli@gmail.commailto:basile.bluntschli@gmail.com> wrote: Hi Mike this update left my Brocade CER hanging with a high CPU consumed by SNMP. I went back to revision 8234. Now I try to recover the CER... Kind regards Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov <mike@observium.orgmailto:mike@observium.org>: Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov <mike@observium.orgmailto:mike@observium.org> wrote: Hi, yes, I was see documentation, but anyway still did not find any device where it exist.. Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR <ybzahr@prodware.frmailto:ybzahr@prodware.fr> wrote: Dear Mike,
Apparently, it is supported according to their documentation (see attached).
[cid:image001.png@01D2761C.06242680]
If needed, I can test for you if you provide me with the commands.
Best regards.
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of Mike Stupalov <mike@observium.orgmailto:mike@observium.org> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: jeudi 17 novembre 2016 09:31 To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote: Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/docs/faq/#my-router-does-not-show-ipv6-bgp-sessions...
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e). Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
Youssef BENGELLOUN - ZAHR - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.frmailto:ybzahr@prodware.fr ________________________________
[cid:image002.png@01D2761C.06242680]
Web : prodware.frhttp://www.prodware.fr[cid:image003.jpg@01D2761C.06242680]http://twitter.com/Prodware/ [cid:image004.jpg@01D2761C.06242680] http://www.facebook.com/Prodware/ [cid:image005.jpg@01D2761C.06242680] https://www.linkedin.com/company/prodwarefrance [cid:image006.jpg@01D2761C.06242680] https://www.youtube.com/c/ProdwareFrance [cid:image007.jpg@01D2761C.06242680] http://www.viadeo.com/fr/company/prodware [cid:image008.jpg@01D2761C.06242680] http://www.prodware.fr/social-network/
Youssef BENGELLOUN - ZAHR - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.frmailto:ybzahr@prodware.fr ________________________________
[cid:image002.png@01D2761C.06242680]
Web : prodware.frhttp://www.prodware.fr [cid:image003.jpg@01D2761C.06242680]http://twitter.com/Prodware/ [cid:image004.jpg@01D2761C.06242680] http://www.facebook.com/Prodware/ [cid:image005.jpg@01D2761C.06242680] https://www.linkedin.com/company/prodwarefrance [cid:image006.jpg@01D2761C.06242680] https://www.youtube.com/c/ProdwareFrance [cid:image007.jpg@01D2761C.06242680] http://www.viadeo.com/fr/company/prodware [cid:image008.jpg@01D2761C.06242680] http://www.prodware.fr/social-network/
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
-- Mike Stupalov http://observium.org/
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium%40observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Jon
would you name me the Case ID? So I can refer to it? While I open a case? DM is fine as well. If you like..
Thanks Basile
2017-01-24 9:29 GMT+01:00 Jonathan Dyson jonathan.dyson@piksel.com:
Hi there,
No apparently it is a feature J We are running version 5.6k but they re-produced it on their own test MLXe switches running newer versions (we can’t run greater than 5.6 due to hardware limitations). Might be worth some other people raising it so that it gains some traction within Brocade?
Thanks,
Jon
*From:* observium [mailto:observium-bounces@observium.org] *On Behalf Of *Basile Bluntschli *Sent:* 24 January 2017 08:21
*To:* Observium Network Observation System observium@observium.org *Subject:* Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi Jon
thanks for the reply. Yeah I was referring to the high CPU issue. So seems to be a doable way to disable the FOUNDRY-BGP4V2-MIB.
Has Brocade named an Ironware release which it is fixed?
Thanks
Basile
2017-01-24 8:57 GMT+01:00 Jonathan Dyson jonathan.dyson@piksel.com:
Hi there, we had exactly the same problem last week with some XMR routers! Looking at the SVN log, it looks like the default behaviour for Brocade devices changed around 9/11/16 (from memory) to use the FOUNDRY-BGP4V2-MIB.
The cause of the problem appears to be the MIB returning a full BGP table via the SNMP Walk (we saw high process usage for the SNMP and BGP processes, presume you see the same?).
Our workaround is to disable the FOUNDRY-BGP4V2-MIB in the device properties and just use the default BGP4-MIB. Also we didn’t have to reboot anything, we found applying an SNMP ACL to **not** allow the Observium box to hit the router reduced the CPU usage after about 30 minutes so that might help you out also.
I actually raised this via Brocade and they confirmed the issue, presume it would be possible to create an SNMP View on the router to skip that part of the MIB but not looked into it yet.
Thanks,
Jon
*From:* observium [mailto:observium-bounces@observium.org] *On Behalf Of *Basile Bluntschli *Sent:* 24 January 2017 07:50
*To:* Observium Network Observation System observium@observium.org *Subject:* Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi All
anyone experienced the same? And got it working? I still did not update Observium since that happend...
Thanks
Basile
2016-11-18 9:33 GMT+01:00 Basile Bluntschli basile.bluntschli@gmail.com:
Hi All
running 5.6h. Target Release Train, as far as I understood...
SNMP clear cache -> CPU still high SNMP unconfigure -> CPU still high
reload device -> all fine again
I'm not able to send you a debug output as of now...
I would need to reboot my devices again to have SNMP working again...
Thanks
Basile
2016-11-18 9:11 GMT+01:00 Mike Stupalov mike@observium.org:
Hi,
same poller debug pls..
-- Mike Stupalov http://observium.org
Christopher Pole chris@apexn.com.au 18 ноября 2016 г. 10:48:57 AM написал:
Some feedback:
I'm seeing a steady stream of this kind of event log message every 5 minutes from each of my Netiron devices doing BGP:
Bgp-peers: 2 updated, 28 unchanged.
Forced discovery module(s): bgp-peers
It's not causing any issues other than filling our Obs event log.
--Chris
On 18 November 2016 at 17:41, Mike Stupalov mike@observium.org wrote:
Hi Basile,
haha, this mean vendor added support for this table in snmp, but never test this :)
Or firmware on your device old :)
Pls show debug for poller (with latest revision!):
./poller.php -d -m os,processors,bgp-peers -h <device>
On Fri, Nov 18, 2016 at 10:30 AM, Basile Bluntschli < basile.bluntschli@gmail.com> wrote:
Hi Mike
this update left my Brocade CER hanging with a high CPU consumed by SNMP.
I went back to revision 8234.
Now I try to recover the CER...
Kind regards
Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov mike@observium.org:
Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov mike@observium.org wrote:
Hi,
yes, I was see documentation, but anyway still did not find any device where it exist..
Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR < ybzahr@prodware.fr> wrote:
Dear Mike,
Apparently, it is supported according to their documentation (see attached).
If needed, I can test for you if you provide me with the commands.
Best regards.
*From: *observium observium-bounces@observium.org on behalf of Mike Stupalov mike@observium.org *Reply-To: *Observium Network Observation System observium@observium.org *Date: *jeudi 17 novembre 2016 09:31 *To: *Observium Network Observation System observium@observium.org *Subject: *Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote:
Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/ docs/faq/#my-router-does-not-show-ipv6-bgp-sessions-how-come
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e).
Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr
http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
observium mailing list
observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov http://observium.org/
--
Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi
I've got the following reply from TAC: DEFECT000555178[SNMP time-out is seen when polling 'bgp4V2Nlritable' table]. This defect is closed in NI 05.4.00a, NI 05.5.00a, NI 05.7.00e, NI 05.8.00d, NI 05.9.00 and above.
So no luck for Jon. But worth a try for me.
I will let you know when we've done the upgrade.
Thanks Basile
2017-01-24 9:43 GMT+01:00 Basile Bluntschli basile.bluntschli@gmail.com:
Hi Jon
would you name me the Case ID? So I can refer to it? While I open a case? DM is fine as well. If you like..
Thanks Basile
2017-01-24 9:29 GMT+01:00 Jonathan Dyson jonathan.dyson@piksel.com:
Hi there,
No apparently it is a feature J We are running version 5.6k but they re-produced it on their own test MLXe switches running newer versions (we can’t run greater than 5.6 due to hardware limitations). Might be worth some other people raising it so that it gains some traction within Brocade?
Thanks,
Jon
*From:* observium [mailto:observium-bounces@observium.org] *On Behalf Of *Basile Bluntschli *Sent:* 24 January 2017 08:21
*To:* Observium Network Observation System observium@observium.org *Subject:* Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi Jon
thanks for the reply. Yeah I was referring to the high CPU issue. So seems to be a doable way to disable the FOUNDRY-BGP4V2-MIB.
Has Brocade named an Ironware release which it is fixed?
Thanks
Basile
2017-01-24 8:57 GMT+01:00 Jonathan Dyson jonathan.dyson@piksel.com:
Hi there, we had exactly the same problem last week with some XMR routers! Looking at the SVN log, it looks like the default behaviour for Brocade devices changed around 9/11/16 (from memory) to use the FOUNDRY-BGP4V2-MIB.
The cause of the problem appears to be the MIB returning a full BGP table via the SNMP Walk (we saw high process usage for the SNMP and BGP processes, presume you see the same?).
Our workaround is to disable the FOUNDRY-BGP4V2-MIB in the device properties and just use the default BGP4-MIB. Also we didn’t have to reboot anything, we found applying an SNMP ACL to **not** allow the Observium box to hit the router reduced the CPU usage after about 30 minutes so that might help you out also.
I actually raised this via Brocade and they confirmed the issue, presume it would be possible to create an SNMP View on the router to skip that part of the MIB but not looked into it yet.
Thanks,
Jon
*From:* observium [mailto:observium-bounces@observium.org] *On Behalf Of *Basile Bluntschli *Sent:* 24 January 2017 07:50
*To:* Observium Network Observation System observium@observium.org *Subject:* Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi All
anyone experienced the same? And got it working? I still did not update Observium since that happend...
Thanks
Basile
2016-11-18 9:33 GMT+01:00 Basile Bluntschli <basile.bluntschli@gmail.com
:
Hi All
running 5.6h. Target Release Train, as far as I understood...
SNMP clear cache -> CPU still high SNMP unconfigure -> CPU still high
reload device -> all fine again
I'm not able to send you a debug output as of now...
I would need to reboot my devices again to have SNMP working again...
Thanks
Basile
2016-11-18 9:11 GMT+01:00 Mike Stupalov mike@observium.org:
Hi,
same poller debug pls..
-- Mike Stupalov http://observium.org
Christopher Pole chris@apexn.com.au 18 ноября 2016 г. 10:48:57 AM написал:
Some feedback:
I'm seeing a steady stream of this kind of event log message every 5 minutes from each of my Netiron devices doing BGP:
Bgp-peers: 2 updated, 28 unchanged.
Forced discovery module(s): bgp-peers
It's not causing any issues other than filling our Obs event log.
--Chris
On 18 November 2016 at 17:41, Mike Stupalov mike@observium.org wrote:
Hi Basile,
haha, this mean vendor added support for this table in snmp, but never test this :)
Or firmware on your device old :)
Pls show debug for poller (with latest revision!):
./poller.php -d -m os,processors,bgp-peers -h <device>
On Fri, Nov 18, 2016 at 10:30 AM, Basile Bluntschli < basile.bluntschli@gmail.com> wrote:
Hi Mike
this update left my Brocade CER hanging with a high CPU consumed by SNMP.
I went back to revision 8234.
Now I try to recover the CER...
Kind regards
Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov mike@observium.org:
Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov mike@observium.org wrote:
Hi,
yes, I was see documentation, but anyway still did not find any device where it exist..
Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR < ybzahr@prodware.fr> wrote:
Dear Mike,
Apparently, it is supported according to their documentation (see attached).
If needed, I can test for you if you provide me with the commands.
Best regards.
*From: *observium observium-bounces@observium.org on behalf of Mike Stupalov mike@observium.org *Reply-To: *Observium Network Observation System <observium@observium.org
*Date: *jeudi 17 novembre 2016 09:31 *To: *Observium Network Observation System observium@observium.org *Subject: *Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote:
Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/doc s/faq/#my-router-does-not-show-ipv6-bgp-sessions-how-come
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e).
Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr
http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
observium mailing list
observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov http://observium.org/
--
Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Thanks for the update Basile, I also got a similar email from Brocade confirming this, hope the upgrade fixes it for you!
Thanks,
Jon
From: observium [mailto:observium-bounces@observium.org] On Behalf Of Basile Bluntschli Sent: 27 January 2017 09:17 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi I've got the following reply from TAC: DEFECT000555178[SNMP time-out is seen when polling 'bgp4V2Nlritable' table]. This defect is closed in NI 05.4.00a, NI 05.5.00a, NI 05.7.00e, NI 05.8.00d, NI 05.9.00 and above. So no luck for Jon. But worth a try for me. I will let you know when we've done the upgrade. Thanks Basile
2017-01-24 9:43 GMT+01:00 Basile Bluntschli <basile.bluntschli@gmail.commailto:basile.bluntschli@gmail.com>: Hi Jon would you name me the Case ID? So I can refer to it? While I open a case? DM is fine as well. If you like.. Thanks Basile
2017-01-24 9:29 GMT+01:00 Jonathan Dyson <jonathan.dyson@piksel.commailto:jonathan.dyson@piksel.com>: Hi there,
No apparently it is a feature ☺ We are running version 5.6k but they re-produced it on their own test MLXe switches running newer versions (we can’t run greater than 5.6 due to hardware limitations). Might be worth some other people raising it so that it gains some traction within Brocade?
Thanks,
Jon
From: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] On Behalf Of Basile Bluntschli Sent: 24 January 2017 08:21
To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi Jon thanks for the reply. Yeah I was referring to the high CPU issue. So seems to be a doable way to disable the FOUNDRY-BGP4V2-MIB. Has Brocade named an Ironware release which it is fixed? Thanks Basile
2017-01-24 8:57 GMT+01:00 Jonathan Dyson <jonathan.dyson@piksel.commailto:jonathan.dyson@piksel.com>: Hi there, we had exactly the same problem last week with some XMR routers! Looking at the SVN log, it looks like the default behaviour for Brocade devices changed around 9/11/16 (from memory) to use the FOUNDRY-BGP4V2-MIB.
The cause of the problem appears to be the MIB returning a full BGP table via the SNMP Walk (we saw high process usage for the SNMP and BGP processes, presume you see the same?).
Our workaround is to disable the FOUNDRY-BGP4V2-MIB in the device properties and just use the default BGP4-MIB. Also we didn’t have to reboot anything, we found applying an SNMP ACL to *not* allow the Observium box to hit the router reduced the CPU usage after about 30 minutes so that might help you out also.
I actually raised this via Brocade and they confirmed the issue, presume it would be possible to create an SNMP View on the router to skip that part of the MIB but not looked into it yet.
Thanks,
Jon
From: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] On Behalf Of Basile Bluntschli Sent: 24 January 2017 07:50
To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi All anyone experienced the same? And got it working? I still did not update Observium since that happend... Thanks Basile
2016-11-18 9:33 GMT+01:00 Basile Bluntschli <basile.bluntschli@gmail.commailto:basile.bluntschli@gmail.com>: Hi All running 5.6h. Target Release Train, as far as I understood... SNMP clear cache -> CPU still high SNMP unconfigure -> CPU still high reload device -> all fine again I'm not able to send you a debug output as of now... I would need to reboot my devices again to have SNMP working again... Thanks Basile
2016-11-18 9:11 GMT+01:00 Mike Stupalov <mike@observium.orgmailto:mike@observium.org>:
Hi,
same poller debug pls..
-- Mike Stupalov http://observium.org
Christopher Pole <chris@apexn.com.aumailto:chris@apexn.com.au> 18 ноября 2016 г. 10:48:57 AM написал: Some feedback:
I'm seeing a steady stream of this kind of event log message every 5 minutes from each of my Netiron devices doing BGP:
Bgp-peers: 2 updated, 28 unchanged. Forced discovery module(s): bgp-peers
It's not causing any issues other than filling our Obs event log.
--Chris
On 18 November 2016 at 17:41, Mike Stupalov <mike@observium.orgmailto:mike@observium.org> wrote: Hi Basile, haha, this mean vendor added support for this table in snmp, but never test this :) Or firmware on your device old :) Pls show debug for poller (with latest revision!): ./poller.php -d -m os,processors,bgp-peers -h <device>
On Fri, Nov 18, 2016 at 10:30 AM, Basile Bluntschli <basile.bluntschli@gmail.commailto:basile.bluntschli@gmail.com> wrote: Hi Mike this update left my Brocade CER hanging with a high CPU consumed by SNMP. I went back to revision 8234. Now I try to recover the CER... Kind regards Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov <mike@observium.orgmailto:mike@observium.org>: Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov <mike@observium.orgmailto:mike@observium.org> wrote: Hi, yes, I was see documentation, but anyway still did not find any device where it exist.. Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR <ybzahr@prodware.frmailto:ybzahr@prodware.fr> wrote: Dear Mike,
Apparently, it is supported according to their documentation (see attached).
[cid:image001.png@01D2789D.86C3E770]
If needed, I can test for you if you provide me with the commands.
Best regards.
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of Mike Stupalov <mike@observium.orgmailto:mike@observium.org> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: jeudi 17 novembre 2016 09:31 To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote: Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/docs/faq/#my-router-does-not-show-ipv6-bgp-sessions...
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e). Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
Youssef BENGELLOUN - ZAHR - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.frmailto:ybzahr@prodware.fr ________________________________
[cid:image002.png@01D2789D.86C3E770]
Web : prodware.frhttp://www.prodware.fr[cid:image003.jpg@01D2789D.86C3E770]http://twitter.com/Prodware/ [cid:image004.jpg@01D2789D.86C3E770] http://www.facebook.com/Prodware/ [cid:image005.jpg@01D2789D.86C3E770] https://www.linkedin.com/company/prodwarefrance [cid:image006.jpg@01D2789D.86C3E770] https://www.youtube.com/c/ProdwareFrance [cid:image007.jpg@01D2789D.86C3E770] http://www.viadeo.com/fr/company/prodware [cid:image008.jpg@01D2789D.86C3E770] http://www.prodware.fr/social-network/
Youssef BENGELLOUN - ZAHR - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.frmailto:ybzahr@prodware.fr ________________________________
[cid:image002.png@01D2789D.86C3E770]
Web : prodware.frhttp://www.prodware.fr [cid:image003.jpg@01D2789D.86C3E770]http://twitter.com/Prodware/ [cid:image004.jpg@01D2789D.86C3E770] http://www.facebook.com/Prodware/ [cid:image005.jpg@01D2789D.86C3E770] https://www.linkedin.com/company/prodwarefrance [cid:image006.jpg@01D2789D.86C3E770] https://www.youtube.com/c/ProdwareFrance [cid:image007.jpg@01D2789D.86C3E770] http://www.viadeo.com/fr/company/prodware [cid:image008.jpg@01D2789D.86C3E770] http://www.prodware.fr/social-network/
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
-- Mike Stupalov http://observium.org/
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium%40observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi All
we've upgraded our CER RT routers to NI 05.8.00f snmp cpu consumption is back to normal. So TAC recommendation for the 5.8d and above train is valid. Now running Observium 8336 and all shiny graphs are back again :)
Thanks Basile
2017-01-27 14:06 GMT+01:00 Youssef BENGELLOUN - ZAHR ybzahr@prodware.fr:
Dear all,
As stated before, I’m running MLXe et CER-RT boxes with 5.7e code (even one in 5.4d) and I’m not seeing this issue.
You should be fine with this if you upgrade. Can’t guaranty you won’t hit something else in the process ;-)
HTH.
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr
http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
http://www.prodware.net/email/2017/wishes/fr.html
*De : *observium observium-bounces@observium.org au nom de Jonathan Dyson jonathan.dyson@piksel.com *Répondre à : *Observium Network Observation System < observium@observium.org> *Date : *vendredi 27 janvier 2017 à 14:01 *À : *Observium Network Observation System observium@observium.org *Objet : *Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Thanks for the update Basile, I also got a similar email from Brocade confirming this, hope the upgrade fixes it for you!
Thanks,
Jon
*From:* observium [mailto:observium-bounces@observium.org] *On Behalf Of *Basile Bluntschli *Sent:* 27 January 2017 09:17 *To:* Observium Network Observation System observium@observium.org *Subject:* Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi
I've got the following reply from TAC: DEFECT000555178[SNMP time-out is seen when polling 'bgp4V2Nlritable' table]. This defect is closed in NI 05.4.00a, NI 05.5.00a, NI 05.7.00e, NI 05.8.00d, NI 05.9.00 and above.
So no luck for Jon. But worth a try for me.
I will let you know when we've done the upgrade.
Thanks
Basile
2017-01-24 9:43 GMT+01:00 Basile Bluntschli basile.bluntschli@gmail.com:
Hi Jon
would you name me the Case ID? So I can refer to it? While I open a case?
DM is fine as well. If you like..
Thanks
Basile
2017-01-24 9:29 GMT+01:00 Jonathan Dyson jonathan.dyson@piksel.com:
Hi there,
No apparently it is a feature J We are running version 5.6k but they re-produced it on their own test MLXe switches running newer versions (we can’t run greater than 5.6 due to hardware limitations). Might be worth some other people raising it so that it gains some traction within Brocade?
Thanks,
Jon
*From:* observium [mailto:observium-bounces@observium.org] *On Behalf Of *Basile Bluntschli *Sent:* 24 January 2017 08:21
*To:* Observium Network Observation System observium@observium.org *Subject:* Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi Jon
thanks for the reply. Yeah I was referring to the high CPU issue. So seems to be a doable way to disable the FOUNDRY-BGP4V2-MIB.
Has Brocade named an Ironware release which it is fixed?
Thanks
Basile
2017-01-24 8:57 GMT+01:00 Jonathan Dyson jonathan.dyson@piksel.com:
Hi there, we had exactly the same problem last week with some XMR routers! Looking at the SVN log, it looks like the default behaviour for Brocade devices changed around 9/11/16 (from memory) to use the FOUNDRY-BGP4V2-MIB.
The cause of the problem appears to be the MIB returning a full BGP table via the SNMP Walk (we saw high process usage for the SNMP and BGP processes, presume you see the same?).
Our workaround is to disable the FOUNDRY-BGP4V2-MIB in the device properties and just use the default BGP4-MIB. Also we didn’t have to reboot anything, we found applying an SNMP ACL to **not** allow the Observium box to hit the router reduced the CPU usage after about 30 minutes so that might help you out also.
I actually raised this via Brocade and they confirmed the issue, presume it would be possible to create an SNMP View on the router to skip that part of the MIB but not looked into it yet.
Thanks,
Jon
*From:* observium [mailto:observium-bounces@observium.org] *On Behalf Of *Basile Bluntschli *Sent:* 24 January 2017 07:50
*To:* Observium Network Observation System observium@observium.org *Subject:* Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi All
anyone experienced the same? And got it working? I still did not update Observium since that happend...
Thanks
Basile
2016-11-18 9:33 GMT+01:00 Basile Bluntschli basile.bluntschli@gmail.com:
Hi All
running 5.6h. Target Release Train, as far as I understood...
SNMP clear cache -> CPU still high SNMP unconfigure -> CPU still high
reload device -> all fine again
I'm not able to send you a debug output as of now...
I would need to reboot my devices again to have SNMP working again...
Thanks
Basile
2016-11-18 9:11 GMT+01:00 Mike Stupalov mike@observium.org:
Hi,
same poller debug pls..
-- Mike Stupalov http://observium.org
Christopher Pole chris@apexn.com.au 18 ноября 2016 г. 10:48:57 AM написал:
Some feedback:
I'm seeing a steady stream of this kind of event log message every 5 minutes from each of my Netiron devices doing BGP:
Bgp-peers: 2 updated, 28 unchanged.
Forced discovery module(s): bgp-peers
It's not causing any issues other than filling our Obs event log.
--Chris
On 18 November 2016 at 17:41, Mike Stupalov mike@observium.org wrote:
Hi Basile,
haha, this mean vendor added support for this table in snmp, but never test this :)
Or firmware on your device old :)
Pls show debug for poller (with latest revision!):
./poller.php -d -m os,processors,bgp-peers -h <device>
On Fri, Nov 18, 2016 at 10:30 AM, Basile Bluntschli < basile.bluntschli@gmail.com> wrote:
Hi Mike
this update left my Brocade CER hanging with a high CPU consumed by SNMP.
I went back to revision 8234.
Now I try to recover the CER...
Kind regards
Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov mike@observium.org:
Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov mike@observium.org wrote:
Hi,
yes, I was see documentation, but anyway still did not find any device where it exist..
Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR < ybzahr@prodware.fr> wrote:
Dear Mike,
Apparently, it is supported according to their documentation (see attached).
If needed, I can test for you if you provide me with the commands.
Best regards.
*From: *observium observium-bounces@observium.org on behalf of Mike Stupalov mike@observium.org *Reply-To: *Observium Network Observation System observium@observium.org *Date: *jeudi 17 novembre 2016 09:31 *To: *Observium Network Observation System observium@observium.org *Subject: *Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote:
Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/ docs/faq/#my-router-does-not-show-ipv6-bgp-sessions-how-come
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e).
Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
*Youssef BENGELLOUN - ZAHR* - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr http://www.prodware.fr
http://twitter.com/Prodware/ http://www.facebook.com/Prodware/ https://www.linkedin.com/company/prodwarefrance https://www.youtube.com/c/ProdwareFrance http://www.viadeo.com/fr/company/prodware http://www.prodware.fr/social-network/
observium mailing list
observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov http://observium.org/
--
Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov http://observium.org/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Apologies, missed the fact that there were two different issues in the thread, I was referring to the high CPU issue.
Thanks,
Jon
From: observium [mailto:observium-bounces@observium.org] On Behalf Of Youssef BENGELLOUN - ZAHR Sent: 24 January 2017 08:07 To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
To what issue are referring ?
High CPU or IPv6 BGP sessions ?
in my case, alerts for IPv6 BGP sessions are working on Brocade gear.
BR.
Le 24 janv. 2017 à 08:50, Basile Bluntschli <basile.bluntschli@gmail.commailto:basile.bluntschli@gmail.com> a écrit : Hi All anyone experienced the same? And got it working? I still did not update Observium since that happend... Thanks Basile
Youssef BENGELLOUN - ZAHR - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.frmailto:ybzahr@prodware.fr ________________________________
[cid:image001.png@01D27619.D2EAF840]
Web : prodware.frhttp://www.prodware.fr [cid:image002.jpg@01D27619.D2EAF840]http://twitter.com/Prodware/ [cid:image003.jpg@01D27619.D2EAF840] http://www.facebook.com/Prodware/ [cid:image004.jpg@01D27619.D2EAF840] https://www.linkedin.com/company/prodwarefrance [cid:image005.jpg@01D27619.D2EAF840] https://www.youtube.com/c/ProdwareFrance [cid:image006.jpg@01D27619.D2EAF840] http://www.viadeo.com/fr/company/prodware [cid:image007.jpg@01D27619.D2EAF840] http://www.prodware.fr/social-network/
[cid:image008.jpg@01D27619.D2EAF840]http://www.prodware.net/email/2017/wishes/fr.html
2016-11-18 9:33 GMT+01:00 Basile Bluntschli <basile.bluntschli@gmail.commailto:basile.bluntschli@gmail.com>: Hi All running 5.6h. Target Release Train, as far as I understood... SNMP clear cache -> CPU still high SNMP unconfigure -> CPU still high reload device -> all fine again I'm not able to send you a debug output as of now... I would need to reboot my devices again to have SNMP working again... Thanks Basile
2016-11-18 9:11 GMT+01:00 Mike Stupalov <mike@observium.orgmailto:mike@observium.org>:
Hi,
same poller debug pls..
-- Mike Stupalov http://observium.org
Christopher Pole <chris@apexn.com.aumailto:chris@apexn.com.au> 18 ноября 2016 г. 10:48:57 AM написал: Some feedback:
I'm seeing a steady stream of this kind of event log message every 5 minutes from each of my Netiron devices doing BGP:
Bgp-peers: 2 updated, 28 unchanged. Forced discovery module(s): bgp-peers
It's not causing any issues other than filling our Obs event log.
--Chris
On 18 November 2016 at 17:41, Mike Stupalov <mike@observium.orgmailto:mike@observium.org> wrote: Hi Basile, haha, this mean vendor added support for this table in snmp, but never test this :) Or firmware on your device old :) Pls show debug for poller (with latest revision!): ./poller.php -d -m os,processors,bgp-peers -h <device>
On Fri, Nov 18, 2016 at 10:30 AM, Basile Bluntschli <basile.bluntschli@gmail.commailto:basile.bluntschli@gmail.com> wrote: Hi Mike this update left my Brocade CER hanging with a high CPU consumed by SNMP. I went back to revision 8234. Now I try to recover the CER... Kind regards Basile
2016-11-17 22:10 GMT+01:00 Mike Stupalov <mike@observium.orgmailto:mike@observium.org>: Try with latest revision r8236. Professional (rolling). :P
On Thu, Nov 17, 2016 at 7:08 PM, Mike Stupalov <mike@observium.orgmailto:mike@observium.org> wrote: Hi, yes, I was see documentation, but anyway still did not find any device where it exist..
Better if you provide snmp access to device where this bgp tables exist for my dev: 77.222.50.30 2a02:408:7722:5030::5030
On Thu, Nov 17, 2016 at 12:02 PM, Youssef BENGELLOUN - ZAHR <ybzahr@prodware.frmailto:ybzahr@prodware.fr> wrote: Dear Mike,
Apparently, it is supported according to their documentation (see attached).
<EF992E00-3678-4A6E-933B-999D81BA288C.png>
If needed, I can test for you if you provide me with the commands.
Best regards.
From: observium <observium-bounces@observium.orgmailto:observium-bounces@observium.org> on behalf of Mike Stupalov <mike@observium.orgmailto:mike@observium.org> Reply-To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Date: jeudi 17 novembre 2016 09:31 To: Observium Network Observation System <observium@observium.orgmailto:observium@observium.org> Subject: Re: [Observium] Brocade support of BGP4 v2 MIB and IPv6 BGP sessions
Hi,
On 17.11.16 11:07, Youssef BENGELLOUN - ZAHR wrote: Dear Community,
I was wondering why I wasn’t able to recover any information about IPv6 BGP sessions from our core routers (Brocade MLXe / CER).
Then I found this page in the FAQ : http://www.observium.org/docs/faq/#my-router-does-not-show-ipv6-bgp-sessions...
I checked related MIB documentation from our vendor, and it seems that draft-ietf-idr-bgp4-mibv2-12 MIB is supported for our OS version (running NetIron 5.7e). Just I still not have access to any device which support this MIB/draft..
Can I ask from the community if there is a debug version that I can run in order to make sur of that ?
Thanks.
Youssef BENGELLOUN - ZAHR - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.frmailto:ybzahr@prodware.fr ________________________________
<ATT00001.png>
Web : prodware.frhttp://www.prodware.fr<ATT00002.jpg>http://twitter.com/Prodware/ <ATT00003.jpg>http://www.facebook.com/Prodware/ <ATT00004.jpg>https://www.linkedin.com/company/prodwarefrance <ATT00005.jpg>https://www.youtube.com/c/ProdwareFrance <ATT00006.jpg>http://www.viadeo.com/fr/company/prodware <ATT00007.jpg>http://www.prodware.fr/social-network/
Youssef BENGELLOUN - ZAHR - Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.frmailto:ybzahr@prodware.fr ________________________________
<image7b20e3.PNG>
Web : prodware.frhttp://www.prodware.fr <image0ff60e.JPG>http://twitter.com/Prodware/ <image72488e.JPG>http://www.facebook.com/Prodware/ <image5688cb.JPG>https://www.linkedin.com/company/prodwarefrance <image7c2e4f.JPG>https://www.youtube.com/c/ProdwareFrance <image065b3f.JPG>http://www.viadeo.com/fr/company/prodware <image318047.JPG>http://www.prodware.fr/social-network/
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
-- Mike Stupalov http://observium.org/
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org/
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium%40observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (5)
-
Basile Bluntschli -
Christopher Pole -
Jonathan Dyson -
Mike Stupalov -
Youssef BENGELLOUN - ZAHR