Hi guys...
[cid:image001.png@01CEE062.CDBEE660]
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
Hi Thomas,
You need to match the RFC/MIB values there, rather than our "prettified" version from the UI.
I think it's ethernetCsmacd. You can check IF-MIB, or the values for ifType returned by your device.
I think there is some scope for making this slightly less complex in future, perhaps with some pretty names or groups.
Thanks, adam.
On 2013-11-13 10:24, Thomas Raabo - Zitcom A/S wrote:
Hi guys…
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Ahh that worked :)
-Also would this work in the same check
os equals ios os equals ironware
- Where do you define the email to sent alerts to? Is it based on the users email attribute? Will all users get the email.
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 11:27 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Hi Thomas,
You need to match the RFC/MIB values there, rather than our "prettified" version from the UI.
I think it's ethernetCsmacd. You can check IF-MIB, or the values for ifType returned by your device.
I think there is some scope for making this slightly less complex in future, perhaps with some pretty names or groups.
Thanks, adam.
On 2013-11-13 10:24, Thomas Raabo - Zitcom A/S wrote:
Hi guys…
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Also one more thing.
What metric conditions are we able to use atm?
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Thomas Raabo - Zitcom A/S Sent: 13. november 2013 11:46 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Ahh that worked :)
-Also would this work in the same check
os equals ios os equals ironware
- Where do you define the email to sent alerts to? Is it based on the users email attribute? Will all users get the email.
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 11:27 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Hi Thomas,
You need to match the RFC/MIB values there, rather than our "prettified" version from the UI.
I think it's ethernetCsmacd. You can check IF-MIB, or the values for ifType returned by your device.
I think there is some scope for making this slightly less complex in future, perhaps with some pretty names or groups.
Thanks, adam.
On 2013-11-13 10:24, Thomas Raabo - Zitcom A/S wrote:
Hi guys…
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
http://www.observium.org/wiki/Alerting
May help :)
On 2013-11-13 10:55, Thomas Raabo - Zitcom A/S wrote:
Also one more thing.
What metric conditions are we able to use atm?
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Thomas Raabo - Zitcom A/S Sent: 13. november 2013 11:46 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Ahh that worked :)
-Also would this work in the same check
os equals ios os equals ironware
- Where do you define the email to sent alerts to? Is it based on the
users email attribute? Will all users get the email.
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 11:27 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Hi Thomas,
You need to match the RFC/MIB values there, rather than our "prettified" version from the UI.
I think it's ethernetCsmacd. You can check IF-MIB, or the values for ifType returned by your device.
I think there is some scope for making this slightly less complex in future, perhaps with some pretty names or groups.
Thanks, adam.
On 2013-11-13 10:24, Thomas Raabo - Zitcom A/S wrote: Hi guys…
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Ahh :) great.
Adam what about who gets the alerts? ;)
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 13:12 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
http://www.observium.org/wiki/Alerting
May help :)
On 2013-11-13 10:55, Thomas Raabo - Zitcom A/S wrote:
Also one more thing.
What metric conditions are we able to use atm?
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Thomas Raabo - Zitcom A/S Sent: 13. november 2013 11:46 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Ahh that worked :)
-Also would this work in the same check
os equals ios os equals ironware
- Where do you define the email to sent alerts to? Is it based on the
users email attribute? Will all users get the email.
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 11:27 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Hi Thomas,
You need to match the RFC/MIB values there, rather than our "prettified" version from the UI.
I think it's ethernetCsmacd. You can check IF-MIB, or the values for ifType returned by your device.
I think there is some scope for making this slightly less complex in future, perhaps with some pretty names or groups.
Thanks, adam.
On 2013-11-13 10:24, Thomas Raabo - Zitcom A/S wrote: Hi guys…
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
You need a section like this :
$config['alerts']['alerter']['default']['descr'] = "Default Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contact'] = "adama@observium.org"; $config['alerts']['alerter']['default']['enable'] = TRUE;
At the moment it only uses the default alerter contact.
adam.
On 2013-11-13 13:46, Thomas Raabo - Zitcom A/S wrote:
Ahh :) great.
Adam what about who gets the alerts? ;)
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 13:12 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
http://www.observium.org/wiki/Alerting
May help :)
On 2013-11-13 10:55, Thomas Raabo - Zitcom A/S wrote: Also one more thing.
What metric conditions are we able to use atm?
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Thomas Raabo - Zitcom A/S Sent: 13. november 2013 11:46 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Ahh that worked :)
-Also would this work in the same check
os equals ios os equals ironware
- Where do you define the email to sent alerts to? Is it based on the
users email attribute? Will all users get the email.
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 11:27 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Hi Thomas,
You need to match the RFC/MIB values there, rather than our "prettified" version from the UI.
I think it's ethernetCsmacd. You can check IF-MIB, or the values for ifType returned by your device.
I think there is some scope for making this slightly less complex in future, perhaps with some pretty names or groups.
Thanks, adam.
On 2013-11-13 10:24, Thomas Raabo - Zitcom A/S wrote: Hi guys…
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I try to monitor storage usage, but any alert checker never poller. See my config on alert.
The new alert system is more easy to config?
2013/11/13 Adam Armstrong adama@memetic.org
Hi,
You need a section like this :
$config['alerts']['alerter']['default']['descr'] = "Default Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contact'] = "adama@observium.org "; $config['alerts']['alerter']['default']['enable'] = TRUE;
At the moment it only uses the default alerter contact.
adam.
On 2013-11-13 13:46, Thomas Raabo - Zitcom A/S wrote:
Ahh :) great.
Adam what about who gets the alerts? ;)
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 13:12 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
http://www.observium.org/wiki/Alerting
May help :)
On 2013-11-13 10:55, Thomas Raabo - Zitcom A/S wrote: Also one more thing.
What metric conditions are we able to use atm?
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Thomas Raabo - Zitcom A/S Sent: 13. november 2013 11:46 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Ahh that worked :)
-Also would this work in the same check
os equals ios os equals ironware
- Where do you define the email to sent alerts to? Is it based on the
users email attribute? Will all users get the email.
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 11:27 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Hi Thomas,
You need to match the RFC/MIB values there, rather than our "prettified" version from the UI.
I think it's ethernetCsmacd. You can check IF-MIB, or the values for ifType returned by your device.
I think there is some scope for making this slightly less complex in future, perhaps with some pretty names or groups.
Thanks, adam.
On 2013-11-13 10:24, Thomas Raabo - Zitcom A/S wrote: Hi guys…
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
On 2013-11-13 21:37, Joarli Leandro [INITNET] wrote:
I try to monitor storage usage, but any alert checker never poller. See my config on alert.
Your MySQL heap memory is full. You need to increase to limit in my.cnf.
max_heap_table_size = 256M
It's probably full of data from the ports-state table, so there's never been any space to create alert_table-state entries.
What you're using is an old development version of the new alerting system.
adam.
[cid:image001.png@01CEE081.C1B2DA10]
How should i understand Errors_rate? pps?
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 13:12 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
http://www.observium.org/wiki/Alerting
May help :)
On 2013-11-13 10:55, Thomas Raabo - Zitcom A/S wrote:
Also one more thing.
What metric conditions are we able to use atm?
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dkmailto:kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dkmailto:tr@zitcom.dk
-----Original Message-----
From: observium [mailto:observium-bounces@observium.org] On Behalf Of
Thomas Raabo - Zitcom A/S
Sent: 13. november 2013 11:46
To: Observium Network Observation System
Subject: Re: [Observium] Alerting system...
Ahh that worked :)
-Also would this work in the same check
os equals ios
os equals ironware
- Where do you define the email to sent alerts to? Is it based on the
users email attribute? Will all users get the email.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dkmailto:kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dkmailto:tr@zitcom.dk
-----Original Message-----
From: observium [mailto:observium-bounces@observium.org] On Behalf Of
Adam Armstrong
Sent: 13. november 2013 11:27
To: Observium Network Observation System
Subject: Re: [Observium] Alerting system...
Hi Thomas,
You need to match the RFC/MIB values there, rather than our
"prettified"
version from the UI.
I think it's ethernetCsmacd. You can check IF-MIB, or the values for
ifType returned by your device.
I think there is some scope for making this slightly less complex in
future, perhaps with some pretty names or groups.
Thanks,
adam.
On 2013-11-13 10:24, Thomas Raabo - Zitcom A/S wrote:
Hi guys…
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dkmailto:kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dkmailto:tr@zitcom.dk
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Same as regular pps rate but for all type of errors on interface
On 13 нояб. 2013 г., at 18:05, Thomas Raabo - Zitcom A/S tr@zitcom.dk wrote:
How should i understand Errors_rate? pps
Adam how would you go about creating a Cisco CPU alert?
Been looking around the source code and found $config['alert_graphs']['processor']['processor_usage'] = array('type' => 'processor_usage', 'id' => '@processor_id');
So did something like
[cid:image001.png@01CEE070.26444390]
But again it’s the entity association i´am having trouble finding ☺.
Is it not possible to do a general Cisco alert or do I have to do it per device type?
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 11:27 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Hi Thomas,
You need to match the RFC/MIB values there, rather than our "prettified"
version from the UI.
I think it's ethernetCsmacd. You can check IF-MIB, or the values for ifType returned by your device.
I think there is some scope for making this slightly less complex in future, perhaps with some pretty names or groups.
Thanks,
adam.
On 2013-11-13 10:24, Thomas Raabo - Zitcom A/S wrote:
Hi guys…
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dkmailto:kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dkmailto:tr@zitcom.dk
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
If you want to match all processors, you can leave it blank.
The checker i'm using for both linux and ios is :
http://alpha.memetic.org/~adama/snaps/4wgdsofm2f.png
You can specify something there if you want different alerting for say, packet forwarding processors as opposed to control plane processors.
adam.
On 2013-11-13 11:59, Thomas Raabo - Zitcom A/S wrote:
Adam how would you go about creating a Cisco CPU alert?
Been looking around the source code and found $config['alert_graphs']['processor']['processor_usage'] = array('type' => 'processor_usage', 'id' => '@processor_id');
So did something like
But again it’s the entity association i´am having trouble finding J.
Is it not possible to do a general Cisco alert or do I have to do it per device type?
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 11:27 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Hi Thomas,
You need to match the RFC/MIB values there, rather than our "prettified"
version from the UI.
I think it's ethernetCsmacd. You can check IF-MIB, or the values for ifType returned by your device.
I think there is some scope for making this slightly less complex in future, perhaps with some pretty names or groups.
Thanks,
adam.
On 2013-11-13 10:24, Thomas Raabo - Zitcom A/S wrote:
Hi guys…
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
Links:
[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
It always wants something in entity
[cid:image001.png@01CEE077.A303D330]
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 13:15 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
If you want to match all processors, you can leave it blank.
The checker i'm using for both linux and ios is :
http://alpha.memetic.org/~adama/snaps/4wgdsofm2f.png
You can specify something there if you want different alerting for say, packet forwarding processors as opposed to control plane processors.
adam.
On 2013-11-13 11:59, Thomas Raabo - Zitcom A/S wrote:
Adam how would you go about creating a Cisco CPU alert?
Been looking around the source code and found
$config['alert_graphs']['processor']['processor_usage'] = array('type'
=> 'processor_usage', 'id' => '@processor_id');
So did something like
But again it’s the entity association i´am having trouble finding J.
Is it not possible to do a general Cisco alert or do I have to do it
per device type?
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dkmailto:kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dkmailto:tr@zitcom.dk
-----Original Message-----
From: observium [mailto:observium-bounces@observium.org] On Behalf Of
Adam Armstrong
Sent: 13. november 2013 11:27
To: Observium Network Observation System
Subject: Re: [Observium] Alerting system...
Hi Thomas,
You need to match the RFC/MIB values there, rather than our
"prettified"
version from the UI.
I think it's ethernetCsmacd. You can check IF-MIB, or the values for
ifType returned by your device.
I think there is some scope for making this slightly less complex in
future, perhaps with some pretty names or groups.
Thanks,
adam.
On 2013-11-13 10:24, Thomas Raabo - Zitcom A/S wrote:
Hi guys…
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dkmailto:kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dkmailto:tr@zitcom.dk
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
Links:
[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hmm. It should allow blank (and convert it to *). Perhaps I broke that when I fixed something else!
Put an asterisk, and it should work!
adam.
On 2013-11-13 12:52, Thomas Raabo - Zitcom A/S wrote:
It always wants something in entity
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 13:15 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
If you want to match all processors, you can leave it blank.
The checker i'm using for both linux and ios is :
http://alpha.memetic.org/~adama/snaps/4wgdsofm2f.png [1]
You can specify something there if you want different alerting for say, packet forwarding processors as opposed to control plane processors.
adam.
On 2013-11-13 11:59, Thomas Raabo - Zitcom A/S wrote:
Adam how would you go about creating a Cisco CPU alert?
Been looking around the source code and found
$config['alert_graphs']['processor']['processor_usage'] = array('type'
=> 'processor_usage', 'id' => '@processor_id');
So did something like
But again it’s the entity association i´am having trouble finding J.
Is it not possible to do a general Cisco alert or do I have to do it
per device type?
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message-----
From: observium [mailto:observium-bounces@observium.org] On Behalf Of
Adam Armstrong
Sent: 13. november 2013 11:27
To: Observium Network Observation System
Subject: Re: [Observium] Alerting system...
Hi Thomas,
You need to match the RFC/MIB values there, rather than our
"prettified"
version from the UI.
I think it's ethernetCsmacd. You can check IF-MIB, or the values for
ifType returned by your device.
I think there is some scope for making this slightly less complex in
future, perhaps with some pretty names or groups.
Thanks,
adam.
On 2013-11-13 10:24, Thomas Raabo - Zitcom A/S wrote:
Hi guys…
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2] [1]
Links:
[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2]
Links:
[1] http://alpha.memetic.org/~adama/snaps/4wgdsofm2f.png [2] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Yep that worked ..
Med venlig hilsen | Best regards Thomas Raabo Netværksansvarlig CCIE #33466 Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 13:57 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
Hmm. It should allow blank (and convert it to *). Perhaps I broke that when I fixed something else!
Put an asterisk, and it should work!
adam.
On 2013-11-13 12:52, Thomas Raabo - Zitcom A/S wrote:
It always wants something in entity
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 13. november 2013 13:15 To: Observium Network Observation System Subject: Re: [Observium] Alerting system...
If you want to match all processors, you can leave it blank.
The checker i'm using for both linux and ios is :
http://alpha.memetic.org/~adama/snaps/4wgdsofm2f.png [1]
You can specify something there if you want different alerting for say, packet forwarding processors as opposed to control plane processors.
adam.
On 2013-11-13 11:59, Thomas Raabo - Zitcom A/S wrote:
Adam how would you go about creating a Cisco CPU alert?
Been looking around the source code and found
$config['alert_graphs']['processor']['processor_usage'] = array('type'
=> 'processor_usage', 'id' => '@processor_id');
So did something like
But again it’s the entity association i´am having trouble finding J.
Is it not possible to do a general Cisco alert or do I have to do it
per device type?
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
-----Original Message-----
From: observium [mailto:observium-bounces@observium.org] On Behalf Of
Adam Armstrong
Sent: 13. november 2013 11:27
To: Observium Network Observation System
Subject: Re: [Observium] Alerting system...
Hi Thomas,
You need to match the RFC/MIB values there, rather than our
"prettified"
version from the UI.
I think it's ethernetCsmacd. You can check IF-MIB, or the values for
ifType returned by your device.
I think there is some scope for making this slightly less complex in
future, perhaps with some pretty names or groups.
Thanks,
adam.
On 2013-11-13 10:24, Thomas Raabo - Zitcom A/S wrote:
Hi guys…
What I´am i doing wrong ?
It does match devices when I do a regenerate.
Med venlig hilsen | Best regards
Thomas Raabo
Netværksansvarlig CCIE #33466
Zitcom A/S
Telefon: 70 40 00 00 E-mail: kontakt@zitcom.dk
Direkte: 69 10 60 18 Direkte: tr@zitcom.dk
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2] [1]
Links:
[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2]
Links:
[1] http://alpha.memetic.org/~adama/snaps/4wgdsofm2f.png [2] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (4)
-
Adam Armstrong -
Joarli Leandro [INITNET] -
Nikolay Shopik -
Thomas Raabo - Zitcom A/S