Hi
We having a Cisco VSS setup (Catalyst 4506 with Sup8-E). Observium only displays Sensor Port information of first supervisor. We have SFP+ with DOM support, displaying a lot of information, unfortunately, Observium only displays information of SFP+ in first Supervisor.
Any idea?
Many thanks, Br Gabriel
________________________________________
Gabriel Müller, Senior Consultant Tel. +41 58 411 95 17 gabriel.mueller@awk.ch
AWK Group AG, Leutschenbachstrasse 45 CH-8050 Zürich, www.awk.chhttp://www.awk.ch/
[Xing]https://www.xing.com/company/awk [Linkedin] http://www.linkedin.com/company/awk-group [Facebook] https://www.facebook.com/awkgroup ________________________________________
support@cisco.com ?
Adam.
Sent from BlueMail
On Apr 24, 2016, 20:35, at 20:35, "Müller, Gabriel" Gabriel.Mueller@awk.ch wrote:
Hi
We having a Cisco VSS setup (Catalyst 4506 with Sup8-E). Observium only displays Sensor Port information of first supervisor. We have SFP+ with DOM support, displaying a lot of information, unfortunately, Observium only displays information of SFP+ in first Supervisor.
Any idea?
Many thanks, Br Gabriel
Gabriel Müller, Senior Consultant Tel. +41 58 411 95 17 gabriel.mueller@awk.ch
AWK Group AG, Leutschenbachstrasse 45 CH-8050 Zürich, www.awk.chhttp://www.awk.ch/
[Xing]https://www.xing.com/company/awk [Linkedin] http://www.linkedin.com/company/awk-group [Facebook] https://www.facebook.com/awkgroup ________________________________________
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
this depends on the IOS-Version you use. With IOS 03.07 you get good results, Observium displaying Temp, Voltage, Current dBm for every Gbic. With IOS 03.08 you even see CPU and mem for the secondary Supervisor-Board.
--------------------------------- XCOM AG Muensterstr. 100A 40476 Duesseldorf , Germany
Telefon +49 211 953530 Telefax +49 211 9535353 jordan.paschalidis@xcom.de
*** XCOM AG Legal Disclaimer ***
Diese E-Mail einschliesslich ihrer Anhaenge ist vertraulich und ist allein für den Gebrauch durch den vorgesehenen Empfaenger bestimmt. Dritten ist das Lesen, Verteilen oder Weiterleiten dieser E-Mail untersagt. Wir bitten, eine fehlgeleitete E-Mail unverzueglich vollstaendig zu loeschen und uns eine Nachricht zukommen zu lassen.
This email may contain material that is confidential and for the sole use of the intended recipient. Any review, distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
Hauptsitz: Allee 8, D-47877 Willich, USt-IdNr.: DE 812 885 664 Kommunikation: Telefon +49 2154 9209-70, Telefax +49 2154 9209-900, www.xcom.de Handelsregister: Amtsgericht Krefeld, HRB 10340 Vorstand: Sascha Bochartz, Muhamad Said Chahrour, Kay-Hendrik Eichler, Dr. Benon Janos, Niklas Helmreich, Bernd Würfel Vorsitzender des Aufsichtsrates: Frank Niehage
Von: "Müller,Gabriel" Gabriel.Mueller@awk.ch An: "observium@observium.org" observium@observium.org Datum: 24.04.2016 21:36 Betreff: [Observium] Missing Port Sensors in VSS Setup Gesendet von: "observium" observium-bounces@observium.org
Hi
We having a Cisco VSS setup (Catalyst 4506 with Sup8-E). Observium only displays Sensor Port information of first supervisor. We have SFP+ with DOM support, displaying a lot of information, unfortunately, Observium only displays information of SFP+ in first Supervisor.
Any idea?
Many thanks, Br Gabriel
________________________________________
Gabriel Müller, Senior Consultant Tel. +41 58 411 95 17 gabriel.mueller@awk.ch
AWK Group AG, Leutschenbachstrasse 45 CH-8050 Zürich, www.awk.ch
________________________________________ [Anhang "image001.png" gelöscht von Jordan Paschalidis/DE/XCOM] [Anhang "image002.png" gelöscht von Jordan Paschalidis/DE/XCOM] [Anhang "image003.png" gelöscht von Jordan Paschalidis/DE/XCOM] _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I just checked a couple VSS units Im monitoring a pair of 4500X-16 in VSS with 03.08.01.E is displaying everything correctly for both chassis. A pair of 6509-E units in VSS with 12.2(33)SXJ10 are displaying everything correctly for both chassis *except* the c6500/c7600 crossbar component, that is only displaying data for Chassis 1. I havent done any digging into the MIB and walking that on the system to see if data is being reported yet, something to look at in my copious free time.
From: observium [mailto:observium-bounces@observium.org] On Behalf Of Jordan Paschalidis Sent: Monday, April 25, 2016 2:21 AM To: Observium Network Observation System Subject: [Observium] Antwort: Missing Port Sensors in VSS Setup
Hi,
this depends on the IOS-Version you use. With IOS 03.07 you get good results, Observium displaying Temp, Voltage, Current dBm for every Gbic. With IOS 03.08 you even see CPU and mem for the secondary Supervisor-Board.
--------------------------------- XCOM AG Muensterstr. 100A 40476 Duesseldorf , Germany
Telefon +49 211 953530 Telefax +49 211 9535353 jordan.paschalidis@xcom.de
*** XCOM AG Legal Disclaimer ***
Diese E-Mail einschliesslich ihrer Anhaenge ist vertraulich und ist allein für den Gebrauch durch den vorgesehenen Empfaenger bestimmt. Dritten ist das Lesen, Verteilen oder Weiterleiten dieser E-Mail untersagt. Wir bitten, eine fehlgeleitete E-Mail unverzueglich vollstaendig zu loeschen und uns eine Nachricht zukommen zu lassen.
This email may contain material that is confidential and for the sole use of the intended recipient. Any review, distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
Hauptsitz: Allee 8, D-47877 Willich, USt-IdNr.: DE 812 885 664 Kommunikation: Telefon +49 2154 9209-70, Telefax +49 2154 9209-900, www.xcom.de Handelsregister: Amtsgericht Krefeld, HRB 10340 Vorstand: Sascha Bochartz, Muhamad Said Chahrour, Kay-Hendrik Eichler, Dr. Benon Janos, Niklas Helmreich, Bernd Würfel Vorsitzender des Aufsichtsrates: Frank Niehage
Inactive hide details for "Müller,Gabriel" ---24.04.2016 21:36:32---Hi We having a Cisco VSS setup (Catalyst 4506 with Sup8-E)."Müller,Gabriel" ---24.04.2016 21:36:32---Hi We having a Cisco VSS setup (Catalyst 4506 with Sup8-E). Observium only displays Sensor Port info
Von: "Müller,Gabriel" Gabriel.Mueller@awk.ch An: "observium@observium.org" observium@observium.org Datum: 24.04.2016 21:36 Betreff: [Observium] Missing Port Sensors in VSS Setup Gesendet von: "observium" observium-bounces@observium.org
_____
Hi
We having a Cisco VSS setup (Catalyst 4506 with Sup8-E). Observium only displays Sensor Port information of first supervisor. We have SFP+ with DOM support, displaying a lot of information, unfortunately, Observium only displays information of SFP+ in first Supervisor.
Any idea?
Many thanks, Br Gabriel
________________________________________
Gabriel Müller, Senior Consultant Tel. +41 58 411 95 17 gabriel.mueller@awk.ch
AWK Group AG, Leutschenbachstrasse 45 CH-8050 Zürich, http://www.awk.ch/ www.awk.ch
________________________________________ [Anhang "image001.png" gelöscht von Jordan Paschalidis/DE/XCOM] [Anhang "image002.png" gelöscht von Jordan Paschalidis/DE/XCOM] [Anhang "image003.png" gelöscht von Jordan Paschalidis/DE/XCOM] _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
The MIB providing data for the crossbar probably isn't VSS aware. It's not from the sensors MIB, it's from somewhere else.
adam. On 25/04/2016 14:46:18, Ron Marosko ron@rjr-services.com wrote: I just checked a couple VSS units I’m monitoring… a pair of 4500X-16 in VSS with 03.08.01.E is displaying everything correctly for both chassis. A pair of 6509-E units in VSS with 12.2(33)SXJ10 are displaying everything correctly for both chassis *except* the c6500/c7600 crossbar component, that is only displaying data for Chassis 1. I haven’t done any digging into the MIB and walking that on the system to see if data is being reported yet, something to look at in my copious free time. From: observium [mailto:observium-bounces@observium.org] On Behalf Of Jordan Paschalidis Sent: Monday, April 25, 2016 2:21 AM To: Observium Network Observation System Subject: [Observium] Antwort: Missing Port Sensors in VSS Setup Hi,
this depends on the IOS-Version you use. With IOS 03.07 you get good results, Observium displaying Temp, Voltage, Current dBm for every Gbic. With IOS 03.08 you even see CPU and mem for the secondary Supervisor-Board.
--------------------------------- XCOM AG Muensterstr. 100A 40476 Duesseldorf , Germany
Telefon +49 211 953530 Telefax +49 211 9535353 jordan.paschalidis@xcom.de [mailto:jordan.paschalidis@xcom.de]
*** XCOM AG Legal Disclaimer ***
Diese E-Mail einschliesslich ihrer Anhaenge ist vertraulich und ist allein für den Gebrauch durch den vorgesehenen Empfaenger bestimmt. Dritten ist das Lesen, Verteilen oder Weiterleiten dieser E-Mail untersagt. Wir bitten, eine fehlgeleitete E-Mail unverzueglich vollstaendig zu loeschen und uns eine Nachricht zukommen zu lassen.
This email may contain material that is confidential and for the sole use of the intended recipient. Any review, distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
Hauptsitz: Allee 8, D-47877 Willich, USt-IdNr.: DE 812 885 664 Kommunikation: Telefon +49 2154 9209-70, Telefax +49 2154 9209-900, www.xcom.de [http://www.xcom.de] Handelsregister: Amtsgericht Krefeld, HRB 10340 Vorstand: Sascha Bochartz, Muhamad Said Chahrour, Kay-Hendrik Eichler, Dr. Benon Janos, Niklas Helmreich, Bernd Würfel Vorsitzender des Aufsichtsrates: Frank Niehage
[Inactive hide details for "Müller,Gabriel" ---24.04.2016 21:36:32---Hi We having a Cisco VSS setup (Catalyst 4506 with Sup8-E).]"Müller,Gabriel" ---24.04.2016 21:36:32---Hi We having a Cisco VSS setup (Catalyst 4506 with Sup8-E). Observium only displays Sensor Port info
Von: "Müller,Gabriel" <Gabriel.Mueller@awk.ch [mailto:Gabriel.Mueller@awk.ch]> An: "observium@observium.org [mailto:observium@observium.org]" <observium@observium.org [mailto:observium@observium.org]> Datum: 24.04.2016 21:36 Betreff: [Observium] Missing Port Sensors in VSS Setup Gesendet von: "observium" <observium-bounces@observium.org [mailto:observium-bounces@observium.org]>
Hi We having a Cisco VSS setup (Catalyst 4506 with Sup8-E). Observium only displays Sensor Port information of first supervisor. We have SFP+ with DOM support, displaying a lot of information, unfortunately, Observium only displays information of SFP+ in first Supervisor. Any idea? Many thanks, Br Gabriel
________________________________________
Gabriel Müller, Senior Consultant Tel. +41 58 411 95 17 gabriel.mueller@awk.ch [mailto:gabriel.mueller@awk.ch]
AWK Group AG, Leutschenbachstrasse 45 CH-8050 Zürich, www.awk.ch [http://www.awk.ch/]
________________________________________ [Anhang "image001.png" gelöscht von Jordan Paschalidis/DE/XCOM] [Anhang "image002.png" gelöscht von Jordan Paschalidis/DE/XCOM] [Anhang "image003.png" gelöscht von Jordan Paschalidis/DE/XCOM] _______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
participants (4)
-
Adam Armstrong -
Jordan Paschalidis -
Müller, Gabriel -
Ron Marosko