Alternatively, Observium can collect and display data from a munin client via the Unix agent, too.

Adam.

Sent with AquaMail for Android http://www.aqua-mail.com

On 29 September 2015 12:43:08 am Michael observium@smarsz.com wrote:

If you use the unix agent (check_mk) it will detect ntpd automatically and add graphing for it. Couldn't be easier.

Assuming you are running ntpd on a unix variant. If it's an appliance (trimble etc), then it might need some extra work to fetch via snmp.

Michael

On 29 September 2015 6:37:14 AM AEST, Federico Olivieri lvrfrc87@gmail.com wrote:

...

Hi All,

I'm trying to plot some graphs with Observium for my NTP server. I would do something similar to MUNIN. I tried to google it but I didn't find any useful information for my (low) level of experience.

Can someone point me in the right direction?

Thank You

Federico

---

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

To get NTP data to observium you need to be running the observium Unix agent on the device.

This is required for both the native NTP graphing and graphing of things via munin.

There is documentation for the Unix agent on the website.

Adam.

Sent with AquaMail for Android http://www.aqua-mail.com

On 29 September 2015 12:56:55 Federico Olivieri lvrfrc87@gmail.com wrote:

Hi guys,

Thanks for your reply. Actually, I'm using Linux version* 3.2.0-4-amd64 (debian-kernel@lists.debian.org debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u3* and I running ntpd but the graphs are not displayed

If I decide to run munin client on my server (I guess munin-node packet) how can I integrate it on OBSERVIUM?

Thanks

Federico

2015-09-28 22:03 GMT+01:00 Adam Armstrong adama@observium.org:

...

Alternatively, Observium can collect and display data from a munin client via the Unix agent, too.

Adam.

Sent with AquaMail for Android http://www.aqua-mail.com

On 29 September 2015 12:43:08 am Michael observium@smarsz.com wrote:

If you use the unix agent (check_mk) it will detect ntpd automatically and

...

add graphing for it. Couldn't be easier.

Assuming you are running ntpd on a unix variant. If it's an appliance (trimble etc), then it might need some extra work to fetch via snmp.

Michael

On 29 September 2015 6:37:14 AM AEST, Federico Olivieri < lvrfrc87@gmail.com> wrote:

...

Hi All,

I'm trying to plot some graphs with Observium for my NTP server. I would do something similar to MUNIN. I tried to google it but I didn't find any useful information for my (low) level of experience.

Can someone point me in the right direction?

Thank You

Federico

---

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Ok guys. I managed to set-up the UNIX agent. It is running on the same machine that is acting as OBSERVIUM server (basically it is pooling itself on loopback interface). I copied the scripts into /usr/lib/observium_agent/local/ and they are executable. On observium web page I can see the agent execution time, however...no one graph related to the scripts copied is shown by observium.

Below my php conf

Any suggestion?

## Check http://www.observium.org/wiki/Configuration_Options for documentation $

// Database config --- This MUST be configured $config['db_host'] = 'localhost'; $config['db_user'] = 'root'; $config['db_pass'] = 'xxxxxx'; $config['db_name'] = 'observium';

// Base directory $config['install_dir'] = "/opt/observium";

// Default community list to use when adding/discovering $config['snmp']['community'] = array("public");

// Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-a$

// Enable alerter (not available in CE) #$config['poller-wrapper']['alerter'] = TRUE;

// Set up a default alerter (email to a single address) $config['alerts']['alerter']['default']['descr'] = "Default Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contact'] = "lvrfrc87@gmail.com"; $config['alerts']['alerter']['default']['enable'] = TRUE;

// UNIX agent $config['poller_modules']['unix-agent'] = 1;

// End config.php

2015-09-29 10:08 GMT+01:00 Federico Olivieri lvrfrc87@gmail.com:

Ok, Thank for the info. I'll have a look

Federico

2015-09-29 10:01 GMT+01:00 Adam Armstrong adama@observium.org:

...

To get NTP data to observium you need to be running the observium Unix agent on the device.

This is required for both the native NTP graphing and graphing of things via munin.

There is documentation for the Unix agent on the website.

Adam.

Sent with AquaMail for Android http://www.aqua-mail.com

On 29 September 2015 12:56:55 Federico Olivieri lvrfrc87@gmail.com wrote:

...

Hi guys,

Thanks for your reply. Actually, I'm using Linux version* 3.2.0-4-amd64 (debian-kernel@lists.debian.org debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u3* and I running ntpd but the graphs are not displayed

If I decide to run munin client on my server (I guess munin-node packet) how can I integrate it on OBSERVIUM?

Thanks

Federico

2015-09-28 22:03 GMT+01:00 Adam Armstrong adama@observium.org:

...

Alternatively, Observium can collect and display data from a munin client via the Unix agent, too.

Adam.

Sent with AquaMail for Android http://www.aqua-mail.com

On 29 September 2015 12:43:08 am Michael observium@smarsz.com wrote:

If you use the unix agent (check_mk) it will detect ntpd automatically

...

and add graphing for it. Couldn't be easier.

Assuming you are running ntpd on a unix variant. If it's an appliance (trimble etc), then it might need some extra work to fetch via snmp.

Michael

On 29 September 2015 6:37:14 AM AEST, Federico Olivieri < lvrfrc87@gmail.com> wrote:

...

Hi All,

I'm trying to plot some graphs with Observium for my NTP server. I would do something similar to MUNIN. I tried to google it but I didn't find any useful information for my (low) level of experience.

Can someone point me in the right direction?

Thank You

Federico

---

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http:/​/​postman​.​memetic​.​org/​cgi-bin/​mailman/​listinfo/​observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Ok, Telnet seems to work (see attachment), however, under application tab I can read No applications found on this device.

(By the way...thank you for your time!)

2015-09-30 22:30 GMT+01:00 Adam Armstrong adama@observium.org:

If it's set up correctly, you should get an "apps" menu populated with applications which are correctly returned.

You can test the agent is returning data by telnetting to the agent port.

adam.

On 30/09/2015 22:17:59, Federico Olivieri lvrfrc87@gmail.com wrote: Ok guys. I managed to set-up the UNIX agent. It is running on the same machine that is acting as OBSERVIUM server (basically it is pooling itself on loopback interface). I copied the scripts into /usr/lib/observium_agent/local/ and they are executable. On observium web page I can see the agent execution time, however...no one graph related to the scripts copied is shown by observium.

Below my php conf

Any suggestion?

## Check http://www.observium.org/wiki/Configuration_Options for documentation $

// Database config --- This MUST be configured $config['db_host'] = 'localhost'; $config['db_user'] = 'root'; $config['db_pass'] = 'xxxxxx'; $config['db_name'] = 'observium';

// Base directory $config['install_dir'] = "/opt/observium";

// Default community list to use when adding/discovering $config['snmp']['community'] = array("public");

// Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-a$

// Enable alerter (not available in CE) #$config['poller-wrapper']['alerter'] = TRUE;

// Set up a default alerter (email to a single address) $config['alerts']['alerter']['default']['descr'] = "Default Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contact'] = "lvrfrc87@gmail.com"; $config['alerts']['alerter']['default']['enable'] = TRUE;

// UNIX agent $config['poller_modules']['unix-agent'] = 1;

// End config.php

2015-09-29 10:08 GMT+01:00 Federico Olivieri lvrfrc87@gmail.com:

...

Ok, Thank for the info. I'll have a look

Federico

2015-09-29 10:01 GMT+01:00 Adam Armstrong adama@observium.org:

...

To get NTP data to observium you need to be running the observium Unix agent on the device.

This is required for both the native NTP graphing and graphing of things via munin.

There is documentation for the Unix agent on the website.

Adam.

Sent with AquaMail for Android http://www.aqua-mail.com

On 29 September 2015 12:56:55 Federico Olivieri lvrfrc87@gmail.com wrote:

...

Hi guys,

Thanks for your reply. Actually, I'm using Linux version* 3.2.0-4-amd64 (debian-kernel@lists.debian.org debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u3* and I running ntpd but the graphs are not displayed

If I decide to run munin client on my server (I guess munin-node packet) how can I integrate it on OBSERVIUM?

Thanks

Federico

2015-09-28 22:03 GMT+01:00 Adam Armstrong adama@observium.org:

...

Alternatively, Observium can collect and display data from a munin client via the Unix agent, too.

Adam.

Sent with AquaMail for Android http://www.aqua-mail.com

On 29 September 2015 12:43:08 am Michael observium@smarsz.com wrote:

If you use the unix agent (check_mk) it will detect ntpd automatically

...

and add graphing for it. Couldn't be easier.

Assuming you are running ntpd on a unix variant. If it's an appliance (trimble etc), then it might need some extra work to fetch via snmp.

Michael

On 29 September 2015 6:37:14 AM AEST, Federico Olivieri < lvrfrc87@gmail.com> wrote:

> Hi All, > > I'm trying to plot some graphs with Observium for my NTP server. I > would do > something similar to MUNIN. I tried to google it but I didn't find > any > useful information for my (low) level of experience. > > Can someone point me in the right direction? > > Thank You > > Federico > > > > ------------------------------------------------------------------------ > > _______________________________________________ > observium mailing list > observium@observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http:/​/​postman​.​memetic​.​org/​cgi-bin/​mailman/​listinfo/​observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Debug output in attached, I had a look but no idea what the mean. Thank you!!!!

2015-09-30 23:00 GMT+01:00 Adam Armstrong adama@memetic.org:

You can run the poller in debug mode to see what, if anything, it tries to do with the data :

./poller.php -h <device_id> -d

adam.

On 30/09/2015 22:58:51, Federico Olivieri lvrfrc87@gmail.com wrote: Ok, Telnet seems to work (see attachment), however, under application tab I can read No applications found on this device.

(By the way...thank you for your time!)

2015-09-30 22:30 GMT+01:00 Adam Armstrong adama@observium.org:

...

If it's set up correctly, you should get an "apps" menu populated with applications which are correctly returned.

You can test the agent is returning data by telnetting to the agent port.

adam.

On 30/09/2015 22:17:59, Federico Olivieri lvrfrc87@gmail.com wrote: Ok guys. I managed to set-up the UNIX agent. It is running on the same machine that is acting as OBSERVIUM server (basically it is pooling itself on loopback interface). I copied the scripts into /usr/lib/observium_agent/local/ and they are executable. On observium web page I can see the agent execution time, however...no one graph related to the scripts copied is shown by observium.

Below my php conf

Any suggestion?

## Check http://www.observium.org/wiki/Configuration_Options for documentation $

// Database config --- This MUST be configured $config['db_host'] = 'localhost'; $config['db_user'] = 'root'; $config['db_pass'] = 'xxxxxx'; $config['db_name'] = 'observium';

// Base directory $config['install_dir'] = "/opt/observium";

// Default community list to use when adding/discovering $config['snmp']['community'] = array("public");

// Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-a$

// Enable alerter (not available in CE) #$config['poller-wrapper']['alerter'] = TRUE;

// Set up a default alerter (email to a single address) $config['alerts']['alerter']['default']['descr'] = "Default Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contact'] = "lvrfrc87@gmail.com "; $config['alerts']['alerter']['default']['enable'] = TRUE;

// UNIX agent $config['poller_modules']['unix-agent'] = 1;

// End config.php

2015-09-29 10:08 GMT+01:00 Federico Olivieri lvrfrc87@gmail.com:

...

Ok, Thank for the info. I'll have a look

Federico

2015-09-29 10:01 GMT+01:00 Adam Armstrong adama@observium.org:

...

To get NTP data to observium you need to be running the observium Unix agent on the device.

This is required for both the native NTP graphing and graphing of things via munin.

There is documentation for the Unix agent on the website.

Adam.

Sent with AquaMail for Android http://www.aqua-mail.com

On 29 September 2015 12:56:55 Federico Olivieri lvrfrc87@gmail.com wrote:

...

Hi guys,

Thanks for your reply. Actually, I'm using Linux version* 3.2.0-4-amd64 (debian-kernel@lists.debian.org debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u3* and I running ntpd but the graphs are not displayed

If I decide to run munin client on my server (I guess munin-node packet) how can I integrate it on OBSERVIUM?

Thanks

Federico

2015-09-28 22:03 GMT+01:00 Adam Armstrong adama@observium.org:

...

Alternatively, Observium can collect and display data from a munin client via the Unix agent, too.

Adam.

Sent with AquaMail for Android http://www.aqua-mail.com

On 29 September 2015 12:43:08 am Michael observium@smarsz.com wrote:

If you use the unix agent (check_mk) it will detect ntpd > automatically and add graphing for it. Couldn't be easier. > > Assuming you are running ntpd on a unix variant. If it's an > appliance (trimble etc), then it might need some extra work to fetch via > snmp. > > Michael > > > > On 29 September 2015 6:37:14 AM AEST, Federico Olivieri < > lvrfrc87@gmail.com> wrote: > >> Hi All, >> >> I'm trying to plot some graphs with Observium for my NTP server. I >> would do >> something similar to MUNIN. I tried to google it but I didn't find >> any >> useful information for my (low) level of experience. >> >> Can someone point me in the right direction? >> >> Thank You >> >> Federico >> >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> observium mailing list >> observium@observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > > _______________________________________________ > observium mailing list > observium@observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http:/​/​postman​.​memetic​.​org/​cgi-bin/​mailman/​listinfo/​observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

It is strange because I have applications under the folder

root@banana:/usr/lib/observium_agent/local# ls -l total 104 -rwxrwxr-x 1 root root 2910 Mar 3 2014 apache -rwxrwxr-x 1 root root 880 Mar 3 2014 dmi -rwxrwxr-x 1 root root 714 Mar 3 2014 dpkg -rwxrwxr-x 1 root root 342 Mar 3 2014 memcached -rwxrwxr-x 1 root root 324 Mar 3 2014 munin drwxrwxr-x 2 root root 4096 Mar 3 2014 munin-scripts -rwxrwxr-x 1 root root 51582 Nov 4 2014 mysql -rw-rw-r-- 1 root root 747 Mar 3 2014 mysql.cnf -rwxrwxrwx 1 banana banana 3211 Mar 26 2014 ntpd -rwxrwxr-x 1 root root 115 Mar 3 2014 powerdns -rwxrwxr-x 1 root root 120 Mar 3 2014 powerdns-recursor -rw-rw-r-- 1 root root 228 Mar 3 2014 README -rwxrwxr-x 1 root root 577 Mar 3 2014 rpm -rwxrwxr-x 1 root root 116 Mar 3 2014 temperature

I'm quite sure that I m missing something of stupid

2015-09-30 23:38 GMT+01:00 Adam Armstrong adama@memetic.org:

Hi,

There don't seem to be any application scripts correctly installed, so it isn't returning any data that will be used by an app pollers.

i.e. :

root@omega:/home/observium/dev# ls /usr/lib/observium_agent/local/ -l -rwxr-xr-x 1 root root 2910 May 15 2014 apache -rwxr-xr-x 1 root root 4234 May 15 2014 bind -rwxr-xr-x 1 root root 714 May 15 2014 dpkg -rwxr-xr-x 1 root root 102 May 15 2014 lmsensors

adam.

On 30/09/2015 23:18:16, Federico Olivieri lvrfrc87@gmail.com wrote: Debug output in attached, I had a look but no idea what the mean. Thank you!!!!

2015-09-30 23:00 GMT+01:00 Adam Armstrong adama@memetic.org:

...

You can run the poller in debug mode to see what, if anything, it tries to do with the data :

./poller.php -h <device_id> -d

adam.

On 30/09/2015 22:58:51, Federico Olivieri lvrfrc87@gmail.com wrote: Ok, Telnet seems to work (see attachment), however, under application tab I can read No applications found on this device.

(By the way...thank you for your time!)

2015-09-30 22:30 GMT+01:00 Adam Armstrong adama@observium.org:

...

If it's set up correctly, you should get an "apps" menu populated with applications which are correctly returned.

You can test the agent is returning data by telnetting to the agent port.

adam.

On 30/09/2015 22:17:59, Federico Olivieri lvrfrc87@gmail.com wrote: Ok guys. I managed to set-up the UNIX agent. It is running on the same machine that is acting as OBSERVIUM server (basically it is pooling itself on loopback interface). I copied the scripts into /usr/lib/observium_agent/local/ and they are executable. On observium web page I can see the agent execution time, however...no one graph related to the scripts copied is shown by observium.

Below my php conf

Any suggestion?

## Check http://www.observium.org/wiki/Configuration_Options for documentation $

// Database config --- This MUST be configured $config['db_host'] = 'localhost'; $config['db_user'] = 'root'; $config['db_pass'] = 'xxxxxx'; $config['db_name'] = 'observium';

// Base directory $config['install_dir'] = "/opt/observium";

// Default community list to use when adding/discovering $config['snmp']['community'] = array("public");

// Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-a$

// Enable alerter (not available in CE) #$config['poller-wrapper']['alerter'] = TRUE;

// Set up a default alerter (email to a single address) $config['alerts']['alerter']['default']['descr'] = "Default Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contact'] = "lvrfrc87@gmail.com "; $config['alerts']['alerter']['default']['enable'] = TRUE;

// UNIX agent $config['poller_modules']['unix-agent'] = 1;

// End config.php

2015-09-29 10:08 GMT+01:00 Federico Olivieri lvrfrc87@gmail.com:

...

Ok, Thank for the info. I'll have a look

Federico

2015-09-29 10:01 GMT+01:00 Adam Armstrong adama@observium.org:

...

To get NTP data to observium you need to be running the observium Unix agent on the device.

This is required for both the native NTP graphing and graphing of things via munin.

There is documentation for the Unix agent on the website.

Adam.

Sent with AquaMail for Android http://www.aqua-mail.com

On 29 September 2015 12:56:55 Federico Olivieri lvrfrc87@gmail.com wrote:

...

Hi guys,

Thanks for your reply. Actually, I'm using Linux version* 3.2.0-4-amd64 (debian-kernel@lists.debian.org debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u3* and I running ntpd but the graphs are not displayed

If I decide to run munin client on my server (I guess munin-node packet) how can I integrate it on OBSERVIUM?

Thanks

Federico

2015-09-28 22:03 GMT+01:00 Adam Armstrong adama@observium.org:

> Alternatively, Observium can collect and display data from a munin > client via the Unix agent, too. > > Adam. > > Sent with AquaMail for Android > http://www.aqua-mail.com > > > > On 29 September 2015 12:43:08 am Michael observium@smarsz.com > wrote: > > If you use the unix agent (check_mk) it will detect ntpd >> automatically and add graphing for it. Couldn't be easier. >> >> Assuming you are running ntpd on a unix variant. If it's an >> appliance (trimble etc), then it might need some extra work to fetch via >> snmp. >> >> Michael >> >> >> >> On 29 September 2015 6:37:14 AM AEST, Federico Olivieri < >> lvrfrc87@gmail.com> wrote: >> >>> Hi All, >>> >>> I'm trying to plot some graphs with Observium for my NTP server. I >>> would do >>> something similar to MUNIN. I tried to google it but I didn't find >>> any >>> useful information for my (low) level of experience. >>> >>> Can someone point me in the right direction? >>> >>> Thank You >>> >>> Federico >>> >>> >>> >>> ------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> observium mailing list >>> observium@observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >> >> _______________________________________________ >> observium mailing list >> observium@observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > > > _______________________________________________ > observium mailing list > observium@observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

---

observium mailing list observium@observium.org

http:/​/​postman​.​memetic​.​org/​cgi-bin/​mailman/​listinfo/​observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Hi,

the packages dpkg rpm were there when I copied the scripts from scripts/agent-local In regards to user and chmod, I was trying different combination. The original script are in this user and group

-rwxrwxr-x 1 banana banana 3211 Mar 26 2014 ntpd

I changed in root root because it didn't work...

2015-09-30 23:55 GMT+01:00 Adam Armstrong adama@memetic.org:

Is there any reason that you have dpkg *and* rpm?

How come the ntpd script has a different user and us chmod 777?

It's possible that there's a permissions issue preventing the scripts from being run. I've never encountered a situation where the observium_agent script failed to execute scripts in the correct directory, so I have no idea why it wouldn't be working.

adam.

On 30/09/2015 23:50:56, Federico Olivieri lvrfrc87@gmail.com wrote: It is strange because I have applications under the folder

root@banana:/usr/lib/observium_agent/local# ls -l total 104 -rwxrwxr-x 1 root root 2910 Mar 3 2014 apache -rwxrwxr-x 1 root root 880 Mar 3 2014 dmi -rwxrwxr-x 1 root root 714 Mar 3 2014 dpkg -rwxrwxr-x 1 root root 342 Mar 3 2014 memcached -rwxrwxr-x 1 root root 324 Mar 3 2014 munin drwxrwxr-x 2 root root 4096 Mar 3 2014 munin-scripts -rwxrwxr-x 1 root root 51582 Nov 4 2014 mysql -rw-rw-r-- 1 root root 747 Mar 3 2014 mysql.cnf -rwxrwxrwx 1 banana banana 3211 Mar 26 2014 ntpd -rwxrwxr-x 1 root root 115 Mar 3 2014 powerdns -rwxrwxr-x 1 root root 120 Mar 3 2014 powerdns-recursor -rw-rw-r-- 1 root root 228 Mar 3 2014 README -rwxrwxr-x 1 root root 577 Mar 3 2014 rpm -rwxrwxr-x 1 root root 116 Mar 3 2014 temperature

I'm quite sure that I m missing something of stupid

2015-09-30 23:38 GMT+01:00 Adam Armstrong adama@memetic.org:

...

Hi,

There don't seem to be any application scripts correctly installed, so it isn't returning any data that will be used by an app pollers.

i.e. :

root@omega:/home/observium/dev# ls /usr/lib/observium_agent/local/ -l -rwxr-xr-x 1 root root 2910 May 15 2014 apache -rwxr-xr-x 1 root root 4234 May 15 2014 bind -rwxr-xr-x 1 root root 714 May 15 2014 dpkg -rwxr-xr-x 1 root root 102 May 15 2014 lmsensors

adam.

On 30/09/2015 23:18:16, Federico Olivieri lvrfrc87@gmail.com wrote: Debug output in attached, I had a look but no idea what the mean. Thank you!!!!

2015-09-30 23:00 GMT+01:00 Adam Armstrong adama@memetic.org:

...

You can run the poller in debug mode to see what, if anything, it tries to do with the data :

./poller.php -h <device_id> -d

adam.

On 30/09/2015 22:58:51, Federico Olivieri lvrfrc87@gmail.com wrote: Ok, Telnet seems to work (see attachment), however, under application tab I can read No applications found on this device.

(By the way...thank you for your time!)

2015-09-30 22:30 GMT+01:00 Adam Armstrong adama@observium.org:

...

If it's set up correctly, you should get an "apps" menu populated with applications which are correctly returned.

You can test the agent is returning data by telnetting to the agent port.

adam.

On 30/09/2015 22:17:59, Federico Olivieri lvrfrc87@gmail.com wrote: Ok guys. I managed to set-up the UNIX agent. It is running on the same machine that is acting as OBSERVIUM server (basically it is pooling itself on loopback interface). I copied the scripts into /usr/lib/observium_agent/local/ and they are executable. On observium web page I can see the agent execution time, however...no one graph related to the scripts copied is shown by observium.

Below my php conf

Any suggestion?

## Check http://www.observium.org/wiki/Configuration_Options for documentation $

// Database config --- This MUST be configured $config['db_host'] = 'localhost'; $config['db_user'] = 'root'; $config['db_pass'] = 'xxxxxx'; $config['db_name'] = 'observium';

// Base directory $config['install_dir'] = "/opt/observium";

// Default community list to use when adding/discovering $config['snmp']['community'] = array("public");

// Authentication Model $config['auth_mechanism'] = "mysql"; // default, other options: ldap, http-a$

// Enable alerter (not available in CE) #$config['poller-wrapper']['alerter'] = TRUE;

// Set up a default alerter (email to a single address) $config['alerts']['alerter']['default']['descr'] = "Default Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contact'] = " lvrfrc87@gmail.com"; $config['alerts']['alerter']['default']['enable'] = TRUE;

// UNIX agent $config['poller_modules']['unix-agent'] = 1;

// End config.php

2015-09-29 10:08 GMT+01:00 Federico Olivieri lvrfrc87@gmail.com:

...

Ok, Thank for the info. I'll have a look

Federico

2015-09-29 10:01 GMT+01:00 Adam Armstrong adama@observium.org:

...

To get NTP data to observium you need to be running the observium Unix agent on the device.

This is required for both the native NTP graphing and graphing of things via munin.

There is documentation for the Unix agent on the website.

Adam.

Sent with AquaMail for Android http://www.aqua-mail.com

On 29 September 2015 12:56:55 Federico Olivieri lvrfrc87@gmail.com wrote:

> Hi guys, > > Thanks for your reply. > Actually, I'm using Linux version* 3.2.0-4-amd64 > (debian-kernel@lists.debian.org debian-kernel@lists.debian.org) (gcc > version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u3* and > I running ntpd but the graphs are not displayed > > If I decide to run munin client on my server (I guess munin-node > packet) how can I integrate it on OBSERVIUM? > > Thanks > > Federico > > > 2015-09-28 22:03 GMT+01:00 Adam Armstrong adama@observium.org: > >> Alternatively, Observium can collect and display data from a munin >> client via the Unix agent, too. >> >> Adam. >> >> Sent with AquaMail for Android >> http://www.aqua-mail.com >> >> >> >> On 29 September 2015 12:43:08 am Michael observium@smarsz.com >> wrote: >> >> If you use the unix agent (check_mk) it will detect ntpd >>> automatically and add graphing for it. Couldn't be easier. >>> >>> Assuming you are running ntpd on a unix variant. If it's an >>> appliance (trimble etc), then it might need some extra work to fetch via >>> snmp. >>> >>> Michael >>> >>> >>> >>> On 29 September 2015 6:37:14 AM AEST, Federico Olivieri < >>> lvrfrc87@gmail.com> wrote: >>> >>>> Hi All, >>>> >>>> I'm trying to plot some graphs with Observium for my NTP server. I >>>> would do >>>> something similar to MUNIN. I tried to google it but I didn't >>>> find any >>>> useful information for my (low) level of experience. >>>> >>>> Can someone point me in the right direction? >>>> >>>> Thank You >>>> >>>> Federico >>>> >>>> >>>> >>>> ------------------------------------------------------------------------ >>>> >>>> _______________________________________________ >>>> observium mailing list >>>> observium@observium.org >>>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium@observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >> >> >> _______________________________________________ >> observium mailing list >> observium@observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > > _______________________________________________ > observium mailing list > observium@observium.org > > http:/​/​postman​.​memetic​.​org/​cgi-bin/​mailman/​listinfo/​observium > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

There is literally nothing to break, this is what the script does :

export AGENT_LIBDIR="/usr/lib/observium_agent"

LOCALDIR=$AGENT_LIBDIR/local

if cd $LOCALDIR then   for skript in $(ls|grep -v '~$')   do     if [ -x "$skript" ] ; then         ./$skript     fi   done fi

If that doesn't work, the only thing it could realistically possibly be is permissions related.

adam. On 01/10/2015 00:01:34, Federico Olivieri lvrfrc87@gmail.com wrote: Hi,

the packages dpkg rpm were there when I copied the scripts from scripts/agent-local In regards to user and chmod, I was trying different combination. The original script are in this user and group

-rwxrwxr-x 1 banana banana  3211 Mar 26  2014 ntpd

I changed in root root because it didn't work...

2015-09-30 23:55 GMT+01:00 Adam Armstrong <adama@memetic.org [mailto:adama@memetic.org]>:

Is there any reason that you have dpkg *and* rpm?

How come the ntpd script has a different user and us chmod 777?

It's possible that there's a permissions issue preventing the scripts from being run. I've never encountered a situation where the observium_agent script failed to execute scripts in the correct directory, so I have no idea why it wouldn't be working.

adam. On 30/09/2015 23:50:56, Federico Olivieri <lvrfrc87@gmail.com [mailto:lvrfrc87@gmail.com]> wrote: It is strange because I have applications under the folder

root@banana:/usr/lib/observium_agent/local# ls -l total 104 -rwxrwxr-x 1 root   root    2910 Mar  3  2014 apache -rwxrwxr-x 1 root   root     880 Mar  3  2014 dmi -rwxrwxr-x 1 root   root     714 Mar  3  2014 dpkg -rwxrwxr-x 1 root   root     342 Mar  3  2014 memcached -rwxrwxr-x 1 root   root     324 Mar  3  2014 munin drwxrwxr-x 2 root   root    4096 Mar  3  2014 munin-scripts -rwxrwxr-x 1 root   root   51582 Nov  4  2014 mysql -rw-rw-r-- 1 root   root     747 Mar  3  2014 mysql.cnf -rwxrwxrwx 1 banana banana  3211 Mar 26  2014 ntpd -rwxrwxr-x 1 root   root     115 Mar  3  2014 powerdns -rwxrwxr-x 1 root   root     120 Mar  3  2014 powerdns-recursor -rw-rw-r-- 1 root   root     228 Mar  3  2014 README -rwxrwxr-x 1 root   root     577 Mar  3  2014 rpm -rwxrwxr-x 1 root   root     116 Mar  3  2014 temperature

I'm quite sure that I m missing something of stupid

2015-09-30 23:38 GMT+01:00 Adam Armstrong <adama@memetic.org [mailto:adama@memetic.org]>:

Hi,

There don't seem to be any application scripts correctly installed, so it isn't returning any data that will be used by an app pollers.

i.e. :

root@omega:/home/observium/dev# ls /usr/lib/observium_agent/local/ -l -rwxr-xr-x 1 root root  2910 May 15  2014 apache -rwxr-xr-x 1 root root  4234 May 15  2014 bind -rwxr-xr-x 1 root root   714 May 15  2014 dpkg -rwxr-xr-x 1 root root   102 May 15  2014 lmsensors

adam. On 30/09/2015 23:18:16, Federico Olivieri <lvrfrc87@gmail.com [mailto:lvrfrc87@gmail.com]> wrote: Debug output in attached, I had a look but no idea what the mean. Thank you!!!!

2015-09-30 23:00 GMT+01:00 Adam Armstrong <adama@memetic.org [mailto:adama@memetic.org]>:

You can run the poller in debug mode to see what, if anything, it tries to do with the data :

./poller.php -h <device_id> -d

adam. On 30/09/2015 22:58:51, Federico Olivieri <lvrfrc87@gmail.com [mailto:lvrfrc87@gmail.com]> wrote: Ok, Telnet seems to work (see attachment), however, under application tab I can read No applications found on this device.

(By the way...thank you for your time!)

2015-09-30 22:30 GMT+01:00 Adam Armstrong <adama@observium.org [mailto:adama@observium.org]>:

If it's set up correctly, you should get an "apps" menu populated with applications which are correctly returned.

You can test the agent is returning data by telnetting to the agent port.

adam. On 30/09/2015 22:17:59, Federico Olivieri <lvrfrc87@gmail.com [mailto:lvrfrc87@gmail.com]> wrote: Ok guys. I managed to set-up the UNIX agent. It is running on the same machine that is acting as OBSERVIUM server (basically it is pooling itself on loopback interface). I copied the scripts into  /usr/lib/observium_agent/local/ and they are executable. On observium web page I can see the agent execution time, however...no one graph related to the scripts copied is shown by observium.

Below my php conf

Any suggestion?

## Check http://www.observium.org/wiki/Configuration_Options [http://www.observium.org/wiki/Configuration_Options] for documentation $

// Database config ---  This MUST be configured $config['db_host'] = 'localhost'; $config['db_user'] = 'root'; $config['db_pass'] = 'xxxxxx'; $config['db_name'] = 'observium';

// Base directory $config['install_dir'] = "/opt/observium";

// Default community list to use when adding/discovering $config['snmp']['community'] = array("public");

// Authentication Model $config['auth_mechanism'] = "mysql";    // default, other options: ldap, http-a$

// Enable alerter (not available in CE) #$config['poller-wrapper']['alerter'] = TRUE;

// Set up a default alerter (email to a single address) $config['alerts']['alerter']['default']['descr']   = "Default Email Alert"; $config['alerts']['alerter']['default']['type']    = "email"; $config['alerts']['alerter']['default']['contact'] = "lvrfrc87@gmail.com [mailto:lvrfrc87@gmail.com]"; $config['alerts']['alerter']['default']['enable']  = TRUE;

// UNIX agent $config['poller_modules']['unix-agent'] = 1;

// End config.php

2015-09-29 10:08 GMT+01:00 Federico Olivieri <lvrfrc87@gmail.com [mailto:lvrfrc87@gmail.com]>:

Ok, Thank for the info. I'll have a look

Federico

2015-09-29 10:01 GMT+01:00 Adam Armstrong <adama@observium.org [mailto:adama@observium.org]>:

To get NTP data to observium you need to be running the observium Unix agent on the device. This is required for both the native NTP graphing and graphing of things via munin. There is documentation for the Unix agent on the website. Adam. Sent with AquaMail for Android http://www.aqua-mail.com [http://www.aqua-mail.com] On 29 September 2015 12:56:55 Federico Olivieri <lvrfrc87@gmail.com [mailto:lvrfrc87@gmail.com]> wrote: Hi guys,

Thanks for your reply. Actually, I'm using Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org [mailto:debian-kernel@lists.debian.org]) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u3 and I running ntpd but the graphs are not displayed

If I decide to run munin client on my server (I guess munin-node packet) how can I integrate it on OBSERVIUM?

Thanks

Federico

2015-09-28 22:03 GMT+01:00 Adam Armstrong <adama@observium.org [mailto:adama@observium.org]>:

Alternatively, Observium can collect and display data from a munin client via the Unix agent, too.

Adam.

Sent with AquaMail for Android http://www.aqua-mail.com [http://www.aqua-mail.com]

On 29 September 2015 12:43:08 am Michael <observium@smarsz.com [mailto:observium@smarsz.com]> wrote:

If you use the unix agent (check_mk) it will detect ntpd automatically and add graphing for it. Couldn't be easier.

Assuming you are running ntpd on a unix variant. If it's an appliance (trimble etc), then it might need some extra work to fetch via snmp.

Michael

On 29 September 2015 6:37:14 AM AEST, Federico Olivieri <lvrfrc87@gmail.com [mailto:lvrfrc87@gmail.com]> wrote:

Hi All,

I'm trying to plot some graphs with Observium for my NTP server. I would do something similar to MUNIN. I tried to google it but I didn't find any useful information for my (low) level of experience.

Can someone point me in the right direction?

Thank You

Federico

------------------------------------------------------------------------

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org [mailto:observium%40observium.org] http:/​/​postman​.​memetic​.​org/​cgi-bin/​mailman/​listinfo/​observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium